lkml.org 
[lkml]   [2010]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Marvell eSATA - 88SE6121 on Asus M3A79-T Deluxe - not in AHCI
Quoting "John Stoffel" <john@stoffel.org>:

>>>>>> "Phil" == Phil Reynolds <phil-linux@tinsleyviaduct.com> writes:
>
> Phil> Quoting "Phil Turmel" <pturmel-kernel@turmel.org>:
>>> I have a similar chipset in my office server: 88SE6145. If yours can run
>>> in AHCI mode, you just need "ahci.marvell_enable=1" on your kernel command
>>> line, or "options ahci marvell_enable=1" in your modprobe.conf. (I have
>>> ahci built-in, and no initramfs, so I put the option in my grub.conf.)
>
> Phil> Neither works for me unfortunately.
>
> Can you post your dmesg output from both bootups? Are there any
> differences? Also submit the lspci -vvv output as well, just so
> people can help you better.

After following advice from various people, I am about there - though
it doesn't seem to last many changes, the eSATA port is now hotplug
capable.

I still have issues to solve to make it perform more like USB does,
but they are not related to anything in the kernel or SCSI layer.
Thanks to all involved.

--
Phil Reynolds
email: phil-linux@tinsleyviaduct.com
Not subscribed to lkml - please CC replies to me

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.


\
 
 \ /
  Last update: 2010-05-15 13:21    [W:0.116 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site