lkml.org 
[lkml]   [2010]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/4] ARM: Gemini: add support for Wiligear WBD-111
Date
From
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

On Mon, 10 May 2010 22:06:58 +0200, Hans Ulli Kroll <ulli.kroll@googlemail.com> wrote:

> From: Imre Kaloz <kaloz@openwrt.org>
>
> Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
> ---
> arch/arm/mach-gemini/Kconfig | 7 ++
> arch/arm/mach-gemini/Makefile | 1 +
> arch/arm/mach-gemini/board-wbd111.c | 143 +++++++++++++++++++++++++++++++++++
> 3 files changed, 151 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-gemini/board-wbd111.c
>
> diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig
> index 515b75c..4de67ce 100644
> --- a/arch/arm/mach-gemini/Kconfig
> +++ b/arch/arm/mach-gemini/Kconfig
> @@ -9,6 +9,13 @@ config MACH_RUT100
> Say Y here if you intend to run this kernel on a
> Teltonika 3G Router RUT100.
>+config MACH_WBD111
> + bool "Wiliboard WBD-111"
> + select GEMINI_MEM_SWAP
> + help
> + Say Y here if you intend to run this kernel on a
> + Wiliboard WBD-111.
> +
> endmenu
> config GEMINI_MEM_SWAP
> diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
> index 719505b..3997487 100644
> --- a/arch/arm/mach-gemini/Makefile
> +++ b/arch/arm/mach-gemini/Makefile
> @@ -8,3 +8,4 @@ obj-y := irq.o mm.o time.o devices.o gpio.o
> # Board-specific support
> obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
> +obj-$(CONFIG_MACH_WBD111) += board-wbd111.o
> diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
> new file mode 100644
> index 0000000..36538c1
> --- /dev/null
> +++ b/arch/arm/mach-gemini/board-wbd111.c
> @@ -0,0 +1,143 @@
> +/*
> + * Support for Wiliboard WBD-111
> + *
> + * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/leds.h>
> +#include <linux/input.h>
> +#include <linux/skbuff.h>
> +#include <linux/gpio_keys.h>
> +#include <linux/mdio-gpio.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/time.h>
> +
> +
> +#include "common.h"
> +
> +static struct gpio_keys_button wbd111_keys[] = {
> + {
> + .code = KEY_SETUP,
> + .gpio = 5,
> + .active_low = 1,
> + .desc = "reset",
> + .type = EV_KEY,
> + },
> +};
> +
> +static struct gpio_keys_platform_data wbd111_keys_data = {
> + .buttons = wbd111_keys,
> + .nbuttons = ARRAY_SIZE(wbd111_keys),
> +};
> +
> +static struct platform_device wbd111_keys_device = {
> + .name = "gpio-keys",
> + .id = -1,
> + .dev = {
> + .platform_data = &wbd111_keys_data,
> + },
> +};
> +
> +static struct gpio_led wbd111_leds[] = {
> + {
> + .name = "L3red",
> + .gpio = 1,
> + },
> + {
> + .name = "L4green",
> + .gpio = 2,
> + },
> + {
> + .name = "L4red",
> + .gpio = 3,
> + },
> + {
> + .name = "L3green",
> + .gpio = 5,
> + },
> +};
> +
> +static struct gpio_led_platform_data wbd111_leds_data = {
> + .num_leds = ARRAY_SIZE(wbd111_leds),
> + .leds = wbd111_leds,
> +};
> +
> +static struct platform_device wbd111_leds_device = {
> + .name = "leds-gpio",
> + .id = -1,
> + .dev = {
> + .platform_data = &wbd111_leds_data,
> + },
> +};
> +
> +static struct sys_timer wbd111_timer = {
> + .init = gemini_timer_init,
> +};
> +
> +#ifdef CONFIG_MTD_PARTITIONS
> +static struct mtd_partition wbd111_partitions[] = {
> + {
> + .name = "RedBoot",
> + .offset = 0,
> + .size = 0x020000,
> + .mask_flags = MTD_WRITEABLE,
> + } , {
> + .name = "kernel",
> + .offset = 0x020000,
> + .size = 0x100000,
> + } , {
> + .name = "rootfs",
> + .offset = 0x120000,
> + .size = 0x6a0000,
> + } , {
> + .name = "VCTL",
> + .offset = 0x7c0000,
> + .size = 0x010000,
> + .mask_flags = MTD_WRITEABLE,
> + } , {
> + .name = "cfg",
> + .offset = 0x7d0000,
> + .size = 0x010000,
> + .mask_flags = MTD_WRITEABLE,
> + } , {
> + .name = "FIS",
> + .offset = 0x7e0000,
> + .size = 0x010000,
> + .mask_flags = MTD_WRITEABLE,
> + }
> +};
> +#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions)
> +#else
> +#define wbd111_partitions NULL
> +#define wbd111_num_partitions 0
> +#endif /* CONFIG_MTD_PARTITIONS */
> +
> +static void __init wbd111_init(void)
> +{
> + gemini_gpio_init();
> + platform_register_uart();
> + platform_register_pflash(SZ_8M, wbd111_partitions,
> + wbd111_num_partitions);
> + platform_device_register(&wbd111_leds_device);
> + platform_device_register(&wbd111_keys_device);
> +}
> +
> +MACHINE_START(WBD111, "Wiliboard WBD-111")
> + .phys_io = 0x7fffc000,
> + .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
> + .boot_params = 0x100,
> + .map_io = gemini_map_io,
> + .init_irq = gemini_init_irq,
> + .timer = &wbd111_timer,
> + .init_machine = wbd111_init,
> +MACHINE_END

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-05-12 10:35    [from the cache]
©2003-2011 Jasper Spaans