lkml.org 
[lkml]   [2010]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: INFO: task umount:1524 blocked for more than 120 seconds
Justin P. Mattock wrote:
> On 05/10/2010 02:46 PM, Justin Mattock wrote:
>> I have a reproduceable problem happening over here
>> with unmount and ext4
>> if I sudo cp -R xserver(all libs/apps from git)
>> to an external
>> SmartDsk FireLite
>> then after the cp is done
>> sudo umount /dev/sdb1
>>
>> I get this:
>>
>> type=1400 audit(1273526248.814:27): avc: denied { unmount } for
>> pid=1524 comm="umount" scontext=justin:staff_r:staff_sudo_t:s0
>> tcontext=system_u:object_r:fs_t:s0 tclass=filesystem
>> [ 360.669140] INFO: task umount:1524 blocked for more than 120 seconds.
>> [ 360.685771] "echo 0> /proc/sys/kernel/hung_task_timeout_secs"
>> disables this message.
>> [ 360.702221] umount D 0000000000000000 0 1524 1472
>> 0x00000080
>> [ 360.702227] ffff880080909c88 0000000000000086 ffff880080909da8
>> 0000000000000000
>> [ 360.702233] ffff880080909fd8 ffff88013845c4a0 0000000000013fc0
>> ffff880080909fd8
>> [ 360.702238] 0000000000013fc0 0000000000013fc0 0000000000013fc0
>> 0000000000013fc0
>> [ 360.702243] Call Trace:
>> [ 360.702252] [<ffffffff8106e3f4>] ? spin_unlock_irqrestore+0x9/0xb
>> [ 360.702266] [<ffffffff810fb214>] ? bdi_sched_wait+0x0/0xd
>> [ 360.702270] [<ffffffff810fb21d>] bdi_sched_wait+0x9/0xd
>> [ 360.702276] [<ffffffff813e2126>] __wait_on_bit+0x43/0x76
>> [ 360.702342] [<ffffffff813e21c2>] out_of_line_wait_on_bit+0x69/0x74
>> [ 360.702346] [<ffffffff810fb214>] ? bdi_sched_wait+0x0/0xd
>> [ 360.702350] [<ffffffff8106e3bd>] ? wake_bit_function+0x0/0x2e
>> [ 360.702356] [<ffffffff81051599>] ? wake_up_process+0x10/0x12
>> [ 360.702360] [<ffffffff810fc00b>] T.732+0x19/0x1b
>> [ 360.702364] [<ffffffff810fc06c>] bdi_sync_writeback+0x5f/0x66
>> [ 360.702368] [<ffffffff810fc090>] sync_inodes_sb+0x1d/0xde
>> [ 360.702373] [<ffffffff810ff04b>] __sync_filesystem+0x47/0x7e
>> [ 360.702377] [<ffffffff810ff229>] sync_filesystem+0x47/0x4b
>> [ 360.702382] [<ffffffff810e2df4>] generic_shutdown_super+0x22/0xf4
>> [ 360.702386] [<ffffffff810e2ee8>] kill_block_super+0x22/0x3a
>> [ 360.702390] [<ffffffff810e35f4>] deactivate_super+0x4c/0x64
>> [ 360.702394] [<ffffffff810f6221>] mntput_no_expire+0xb0/0xde
>> [ 360.702397] [<ffffffff810f679a>] sys_umount+0x2d9/0x304
>> [ 360.702402] [<ffffffff810e899e>] ? path_put+0x1d/0x21
>> [ 360.702408] [<ffffffff81024502>] system_call_fastpath+0x16/0x1b
>> [ 400.536564] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
>> [ 400.536587] ieee1394: Node paused: ID:BUS[0-00:1023] GUID[00d0010d0001eaa9]
>> [ 403.551124] ieee1394: Node removed: ID:BUS[0-00:1023] GUID[00d0010d0001eaa9]
>> [ 403.551263] end_request: I/O error, dev sdb, sector 54795503
>> [ 403.564505] Aborting journal on device sdb1-8.
>> [ 403.577816] JBD2: I/O error detected when updating journal superblock for sdb1-8.
>> [ 403.591168] journal commit I/O error
>>
>>
>> disk just sits there with the light on.
>>
>> if I disconnect, then re execute mount,cp,umount
>> I can get this again:
[...]

> maybe this is cable related i.g.
> using a firewire cable from the apple
> store($40big ones),on an imac gives this
> message., but if I use the
> cable from the firewire(slighty thicker), on
> a macbook, I can do the above mount,cp,unmount
> with the kernel, and hit nothing.

It is strange then that you don't get any I/O error messages from sbp2
or from scsi. Or do you?

Was the "Node paused" message in the log above from when you actually
unplugged or switched off the disk, or didn't do you anything to it at
that moment?

>(both xserver
> and all its libs etc.. and the kernel both seem to
> be pretty large to transfer).

Depends on how much RAM you have. Could be that there isn't a lot of IO
going on until umount.

Perhaps there is a bug in the disk's IDE-to-FireWire bridge that went
unnoticed with older kernels but is now exhibited due to different
kernel behaviour (writeback related changes, larger requests...).
Several SmartDisk products have an old Symbios chip that require
requests limited to 128 kB each. When sbp2 logs in to the device, does
it print a "Workarounds for node "... message? If yes, do the
workaround flags contain 0x1?

If not, run "echo 1 > /sys/module/sbp2/parameters/workarounds" before
you plug in the disk. *If* this fixes the issue, we should add the
device IDs to sbp2's and firewire-sbp2's hardcoded quirks lists.

(By the way, ieee1394/ ohci1394/ sbp2 are kind of end-of-life products;
firewire-core/ firewire-ohci/ firewire-sbp2 are more actively
maintained. OTOH there shouldn't be regressions in the 1394 stack.)
--
Stefan Richter
-=====-==-=- -=-= -=-==
http://arcgraph.de/sr/


\
 
 \ /
  Last update: 2010-05-12 10:17    [W:0.088 / U:17.764 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site