lkml.org 
[lkml]   [2010]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [LKML] Re: USB transfer_buffer allocations on 64bit systems
From
On Fri, Apr 9, 2010 at 3:23 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
> On Fri, 9 Apr 2010, Konrad Rzeszutek Wilk wrote:
>
>> On Fri, Apr 09, 2010 at 03:34:06PM -0400, Alan Stern wrote:
>> > On Fri, 9 Apr 2010, Pedro Ribeiro wrote:
>> >
>> > > > The DMA pointers do indeed look sane. I wanted to take a deeper look at
>> > > > this and set up a 64bit system today. However, I fail to see the problem
>> > > > here. Pedro, how much RAM does your machine have installed?
>> >
>> > > It has 4 GB.
>> >
>> > That means DMA mapping cannot be the cause of the problem.  :-(
>>
>> That isn't entirely true. The BIOS usually allocates a 256 MB ACPI/PCI hole
>> that is under the 4GB.
>>
>> So end up with 3.7 GB, then the 256MB hole, and then right above the 4GB
>> you the the remaining memory: 4.3GB.
>
> How can Pedro find out what physical addresses are in use on his
> system?

If you have 4GB of RAM then almost certainly you have memory located
at addresses over 4GB. If you look at the e820 memory map printed at
the start of dmesg on bootup and see entries with addresses of
100000000 or higher reported as usable, then this is the case.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-04-10 00:15    [W:0.286 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site