lkml.org 
[lkml]   [2010]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] x86: clean up arch/x86/Kconfig*
On Wed, 21 Apr 2010 15:23:44 +0100 Jan Beulich wrote:

> No functional change intended.
>
> Signed-off-by: Jan Beulich <jbeulich@novell.com>

Looks good. Thanks.

Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com>


>
> ---
> arch/x86/Kconfig | 49 +++++++++++++-------------------------------
> arch/x86/Kconfig.debug | 2 -
> arch/x86/include/asm/boot.h | 2 -
> 3 files changed, 16 insertions(+), 37 deletions(-)
>
> --- linux-2.6.34-rc5/arch/x86/Kconfig 2010-04-20 16:07:41.000000000 +0200
> +++ 2.6.34-rc5-x86-kconfig-cleanup/arch/x86/Kconfig 2010-03-25 15:05:54.000000000 +0100
> @@ -197,20 +197,17 @@ config HAVE_INTEL_TXT
>
> # Use the generic interrupt handling code in kernel/irq/:
> config GENERIC_HARDIRQS
> - bool
> - default y
> + def_bool y
>
> config GENERIC_HARDIRQS_NO__DO_IRQ
> def_bool y
>
> config GENERIC_IRQ_PROBE
> - bool
> - default y
> + def_bool y
>
> config GENERIC_PENDING_IRQ
> - bool
> + def_bool y
> depends on GENERIC_HARDIRQS && SMP
> - default y
>
> config USE_GENERIC_SMP_HELPERS
> def_bool y
> @@ -225,14 +222,12 @@ config X86_64_SMP
> depends on X86_64 && SMP
>
> config X86_HT
> - bool
> + def_bool y
> depends on SMP
> - default y
>
> config X86_TRAMPOLINE
> - bool
> + def_bool y
> depends on SMP || (64BIT && ACPI_SLEEP)
> - default y
>
> config X86_32_LAZY_GS
> def_bool y
> @@ -447,7 +442,7 @@ config X86_NUMAQ
> firmware with - send email to <Martin.Bligh@us.ibm.com>.
>
> config X86_SUPPORTS_MEMORY_FAILURE
> - bool
> + def_bool y
> # MCE code calls memory_failure():
> depends on X86_MCE
> # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
> @@ -455,7 +450,6 @@ config X86_SUPPORTS_MEMORY_FAILURE
> # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
> depends on X86_64 || !SPARSEMEM
> select ARCH_SUPPORTS_MEMORY_FAILURE
> - default y
>
> config X86_VISWS
> bool "SGI 320/540 (Visual Workstation)"
> @@ -570,7 +564,6 @@ config PARAVIRT_SPINLOCKS
>
> config PARAVIRT_CLOCK
> bool
> - default n
>
> endif
>
> @@ -749,7 +742,6 @@ config MAXSMP
> bool "Configure Maximum number of SMP Processors and NUMA Nodes"
> depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL
> select CPUMASK_OFFSTACK
> - default n
> ---help---
> Configure maximum number of CPUS and NUMA Nodes for this architecture.
> If unsure, say N.
> @@ -829,7 +821,6 @@ config X86_VISWS_APIC
>
> config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
> bool "Reroute for broken boot IRQs"
> - default n
> depends on X86_IO_APIC
> ---help---
> This option enables a workaround that fixes a source of
> @@ -876,9 +867,8 @@ config X86_MCE_AMD
> the DRAM Error Threshold.
>
> config X86_ANCIENT_MCE
> - def_bool n
> + bool "Support for old Pentium 5 / WinChip machine checks"
> depends on X86_32 && X86_MCE
> - prompt "Support for old Pentium 5 / WinChip machine checks"
> ---help---
> Include support for machine check handling on old Pentium 5 or WinChip
> systems. These typically need to be enabled explicitely on the command
> @@ -886,8 +876,7 @@ config X86_ANCIENT_MCE
>
> config X86_MCE_THRESHOLD
> depends on X86_MCE_AMD || X86_MCE_INTEL
> - bool
> - default y
> + def_bool y
>
> config X86_MCE_INJECT
> depends on X86_MCE
> @@ -1026,8 +1015,8 @@ config X86_CPUID
>
> choice
> prompt "High Memory Support"
> - default HIGHMEM4G if !X86_NUMAQ
> default HIGHMEM64G if X86_NUMAQ
> + default HIGHMEM4G
> depends on X86_32
>
> config NOHIGHMEM
> @@ -1285,7 +1274,7 @@ source "mm/Kconfig"
>
> config HIGHPTE
> bool "Allocate 3rd-level pagetables from highmem"
> - depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
> + depends on HIGHMEM
> ---help---
> The VM uses one page table entry for each page of physical memory.
> For systems with a lot of RAM, this can be wasteful of precious
> @@ -1369,8 +1358,7 @@ config MATH_EMULATION
> kernel, it won't hurt.
>
> config MTRR
> - bool
> - default y
> + def_bool y
> prompt "MTRR (Memory Type Range Register) support" if EMBEDDED
> ---help---
> On Intel P6 family processors (Pentium Pro, Pentium II and later)
> @@ -1436,8 +1424,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAU
> mtrr_spare_reg_nr=N on the kernel command line.
>
> config X86_PAT
> - bool
> - default y
> + def_bool y
> prompt "x86 PAT support" if EMBEDDED
> depends on MTRR
> ---help---
> @@ -1605,8 +1592,7 @@ config X86_NEED_RELOCS
> depends on X86_32 && RELOCATABLE
>
> config PHYSICAL_ALIGN
> - hex
> - prompt "Alignment value to which kernel should be aligned" if X86_32
> + hex "Alignment value to which kernel should be aligned" if X86_32
> default "0x1000000"
> range 0x2000 0x1000000
> ---help---
> @@ -1653,7 +1639,6 @@ config COMPAT_VDSO
>
> config CMDLINE_BOOL
> bool "Built-in kernel command line"
> - default n
> ---help---
> Allow for specifying boot arguments to the kernel at
> build time. On some systems (e.g. embedded ones), it is
> @@ -1687,7 +1672,6 @@ config CMDLINE
>
> config CMDLINE_OVERRIDE
> bool "Built-in command line overrides boot loader arguments"
> - default n
> depends on CMDLINE_BOOL
> ---help---
> Set this option to 'Y' to have the kernel ignore the boot loader
> @@ -1723,8 +1707,7 @@ source "drivers/acpi/Kconfig"
> source "drivers/sfi/Kconfig"
>
> config X86_APM_BOOT
> - bool
> - default y
> + def_bool y
> depends on APM || APM_MODULE
>
> menuconfig APM
> @@ -1953,8 +1936,7 @@ config DMAR_DEFAULT_ON
> experimental.
>
> config DMAR_BROKEN_GFX_WA
> - def_bool n
> - prompt "Workaround broken graphics drivers (going away soon)"
> + bool "Workaround broken graphics drivers (going away soon)"
> depends on DMAR && BROKEN
> ---help---
> Current Graphics drivers tend to use physical address
> @@ -2052,7 +2034,6 @@ config SCx200HR_TIMER
> config OLPC
> bool "One Laptop Per Child support"
> select GPIOLIB
> - default n
> ---help---
> Add support for detecting the unique features of the OLPC
> XO hardware.
> --- linux-2.6.34-rc5/arch/x86/Kconfig.debug 2010-02-24 19:52:17.000000000 +0100
> +++ 2.6.34-rc5-x86-kconfig-cleanup/arch/x86/Kconfig.debug 2010-03-25 15:07:20.000000000 +0100
> @@ -45,7 +45,6 @@ config EARLY_PRINTK
>
> config EARLY_PRINTK_DBGP
> bool "Early printk via EHCI debug port"
> - default n
> depends on EARLY_PRINTK && PCI
> ---help---
> Write kernel log output directly into the EHCI debug port.
> @@ -76,7 +75,6 @@ config DEBUG_PER_CPU_MAPS
> bool "Debug access to per_cpu maps"
> depends on DEBUG_KERNEL
> depends on SMP
> - default n
> ---help---
> Say Y to verify that the per_cpu map being accessed has
> been setup. Adds a fair amount of code to kernel memory
> --- linux-2.6.34-rc5/arch/x86/include/asm/boot.h 2009-09-10 00:13:59.000000000 +0200
> +++ 2.6.34-rc5-x86-kconfig-cleanup/arch/x86/include/asm/boot.h 2010-03-25 15:04:29.000000000 +0100
> @@ -24,7 +24,7 @@
> #define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
>
> #if (CONFIG_PHYSICAL_ALIGN & (CONFIG_PHYSICAL_ALIGN-1)) || \
> - (CONFIG_PHYSICAL_ALIGN < (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2))
> + (CONFIG_PHYSICAL_ALIGN < MIN_KERNEL_ALIGN)
> #error "Invalid value for CONFIG_PHYSICAL_ALIGN"
> #endif
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


---
~Randy


\
 
 \ /
  Last update: 2010-04-21 17:51    [W:0.096 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site