lkml.org 
[lkml]   [2010]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv4 2.6.34-rc4 5/7] mxc: Add generic USB HW initialization for MX51
On 10 Apr 17, Daniel Mack wrote:
> On Fri, Apr 16, 2010 at 02:16:09PM -0500, Dinh.Nguyen@freescale.com wrote:
> > This patch adds USB HW initializiation code to /plat-mxc/ehci.c.
> > -Stops and resets USB HW
> > -Sets some specific PHY settings
> > -Stop and restart the USB HW.
> > Renames mxc_set_usbcontrol to mxc_initialize_usb_hw.
> >
> > This patch applies to 2.6.34-rc4.
>
> Yes, the whole series looks _much_ better now, thanks!
> Some minor things below.
>
>
> > Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
> > ---
> > arch/arm/plat-mxc/ehci.c | 128 ++++++++++++++++++++++++++++-
> > arch/arm/plat-mxc/include/mach/mxc_ehci.h | 2 +-
> > 2 files changed, 127 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
> > index cb0b638..35ff1c1 100644
> > --- a/arch/arm/plat-mxc/ehci.c
> > +++ b/arch/arm/plat-mxc/ehci.c
> > @@ -1,5 +1,6 @@
> > /*
> > * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
> > + * Copyright (C) 2010 Freescale Semiconductor, Inc.
> > *
> > * This program is free software; you can redistribute it and/or modify it
> > * under the terms of the GNU General Public License as published by the
> > @@ -18,6 +19,7 @@
> >
> > #include <linux/platform_device.h>
> > #include <linux/io.h>
> > +#include <linux/delay.h>
> >
> > #include <mach/hardware.h>
> > #include <mach/mxc_ehci.h>
> > @@ -50,9 +52,14 @@
> > #define MX35_H1_TLL_BIT (1 << 5)
> > #define MX35_H1_USBTE_BIT (1 << 4)
> >
> > -int mxc_set_usbcontrol(int port, unsigned int flags)
> > +int mxc_intialize_usb_hw(int port, unsigned int flags)
>
> This patch and the next one should be merged into one. The reason is
> that you rename a function here and the next patch follows that change.
> Especially when bisecting, this can lead to uncompilable checkouts of
> the tree when stopping in the middle.

Also, patch 3 really belongs with this patch too since the #defines in
patch 3 are used here.

--
----------------------------------------------------------------------
Amit Kucheria, Kernel Engineer || amit.kucheria@canonical.com
----------------------------------------------------------------------


\
 
 \ /
  Last update: 2010-04-19 03:07    [W:0.165 / U:1.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site