lkml.org 
[lkml]   [2010]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2.6.34-rc4 2/3] mx5: Add USB device definitions for Freescale MX51 Babbage HW
Date
From: Dinh Nguyen <Dinh.Nguyen@freescale.com>

This patch is part of enabling USB for Freescale MX51 Babbage HW. This
patch adds device structures for USB Host1 and OTG port, and adds
clocking information for USB HW.

This patch applies to 2.6.34-rc4.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
---
arch/arm/mach-mx5/clock-mx51.c | 8 ++++++
arch/arm/mach-mx5/devices.c | 49 ++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-mx5/devices.h | 2 +
3 files changed, 59 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index 1ee6ce4..1fe40e1 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -762,6 +762,10 @@ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
NULL, NULL, &ipg_clk, NULL);

+/* USB */
+DEFINE_CLOCK(usboh3_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG14_OFFSET,
+ NULL, NULL, &pll3_sw_clk, NULL);
+
/* FEC */
DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
NULL, NULL, &ipg_clk, NULL);
@@ -779,6 +783,10 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
};

static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 5070ae1..4b456d5 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -12,6 +12,7 @@

#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/irqs.h>
@@ -92,6 +93,54 @@ struct platform_device mxc_fec_device = {
.resource = mxc_fec_resources,
};

+static u64 usb_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource usbotg_resources[] = {
+ {
+ .start = MX51_OTG_BASE_ADDR,
+ .end = MX51_OTG_BASE_ADDR + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MX51_MXC_INT_USB_OTG,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbdr_host_device = {
+ .name = "mxc-ehci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(usbotg_resources),
+ .resource = usbotg_resources,
+ .dev = {
+ .dma_mask = &usb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct resource usbh1_resources[] = {
+ {
+ .start = MX51_OTG_BASE_ADDR + 0x200,
+ .end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MX51_MXC_INT_USB_H1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbh1_device = {
+ .name = "mxc-ehci",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(usbh1_resources),
+ .resource = usbh1_resources,
+ .dev = {
+ .dma_mask = &usb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
static struct mxc_gpio_port mxc_gpio_ports[] = {
{
.chip.label = "gpio-0",
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index f339ab8..6497764 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -2,3 +2,5 @@ extern struct platform_device mxc_uart_device0;
extern struct platform_device mxc_uart_device1;
extern struct platform_device mxc_uart_device2;
extern struct platform_device mxc_fec_device;
+extern struct platform_device mxc_usbdr_host_device;
+extern struct platform_device mxc_usbh1_device;
\ No newline at end of file
--
1.6.0.4


\
 
 \ /
  Last update: 2010-04-15 08:29    [W:0.040 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site