lkml.org 
[lkml]   [2010]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: vmalloc performance
From
Date
On Thu, 2010-04-15 at 09:33 +0100, Steven Whitehouse wrote:
> Hi,
>
> On Thu, 2010-04-15 at 01:35 +0900, Minchan Kim wrote:
> > On Thu, 2010-04-15 at 00:13 +0900, Minchan Kim wrote:
> > > Cced Nick.
> > > He's Mr. Vmalloc.
> > >
> > > On Wed, Apr 14, 2010 at 9:49 PM, Steven Whitehouse <swhiteho@redhat.com> wrote:
> > > >
> > > > Since this didn't attract much interest the first time around, and at
> > > > the risk of appearing to be talking to myself, here is the patch from
> > > > the bugzilla to better illustrate the issue:
> > > >
> > > >
> > > > diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> > > > index ae00746..63c8178 100644
> > > > --- a/mm/vmalloc.c
> > > > +++ b/mm/vmalloc.c
> > > > @@ -605,8 +605,7 @@ static void free_unmap_vmap_area_noflush(struct
> > > > vmap_area *va)
> > > > {
> > > > va->flags |= VM_LAZY_FREE;
> > > > atomic_add((va->va_end - va->va_start) >> PAGE_SHIFT, &vmap_lazy_nr);
> > > > - if (unlikely(atomic_read(&vmap_lazy_nr) > lazy_max_pages()))
> > > > - try_purge_vmap_area_lazy();
> > > > + try_purge_vmap_area_lazy();
> > > > }
> > > >
> > > > /*
> > > >
> > > >
> > > > Steve.
> > > >
> > > > On Mon, 2010-04-12 at 17:27 +0100, Steven Whitehouse wrote:
> > > >> Hi,
> > > >>
> > > >> I've noticed that vmalloc seems to be rather slow. I wrote a test kernel
> > > >> module to track down what was going wrong. The kernel module does one
> > > >> million vmalloc/touch mem/vfree in a loop and prints out how long it
> > > >> takes.
> > > >>
> > > >> The source of the test kernel module can be found as an attachment to
> > > >> this bz: https://bugzilla.redhat.com/show_bug.cgi?id=581459
> > > >>
> > > >> When this module is run on my x86_64, 8 core, 12 Gb machine, then on an
> > > >> otherwise idle system I get the following results:
> > > >>
> > > >> vmalloc took 148798983 us
> > > >> vmalloc took 151664529 us
> > > >> vmalloc took 152416398 us
> > > >> vmalloc took 151837733 us
> > > >>
> > > >> After applying the two line patch (see the same bz) which disabled the
> > > >> delayed removal of the structures, which appears to be intended to
> > > >> improve performance in the smp case by reducing TLB flushes across cpus,
> > > >> I get the following results:
> > > >>
> > > >> vmalloc took 15363634 us
> > > >> vmalloc took 15358026 us
> > > >> vmalloc took 15240955 us
> > > >> vmalloc took 15402302 us
> >
> >
> > > >>
> > > >> So thats a speed up of around 10x, which isn't too bad. The question is
> > > >> whether it is possible to come to a compromise where it is possible to
> > > >> retain the benefits of the delayed TLB flushing code, but reduce the
> > > >> overhead for other users. My two line patch basically disables the delay
> > > >> by forcing a removal on each and every vfree.
> > > >>
> > > >> What is the correct way to fix this I wonder?
> > > >>
> > > >> Steve.
> > > >>
> >
> > In my case(2 core, mem 2G system), 50300661 vs 11569357.
> > It improves 4 times.
> >
> Looking at the code, it seems that the limit, against which my patch
> removes a test, scales according to the number of cpu cores. So with
> more cores, I'd expect the difference to be greater. I have a feeling
> that the original reporter had a greater number than the 8 of my test
> machine.
>
> > It would result from larger number of lazy_max_pages.
> > It would prevent many vmap_area freed.
> > So alloc_vmap_area takes long time to find new vmap_area. (ie, lookup
> > rbtree)
> >
> > How about calling purge_vmap_area_lazy at the middle of loop in
> > alloc_vmap_area if rbtree lookup were long?
> >
> That may be a good solution - I'm happy to test any patches but my worry
> is that any change here might result in a regression in whatever
> workload the lazy purge code was originally designed to improve. Is
> there any way to test that I wonder?
>
> > BTW, Steve. Is is real issue or some test?
> > I doubt such vmalloc bomb workload is real.
>
> Well the answer is both yes and no :-) So this is how I came across the
> issue. I received a report that GFS2 performance had regressed in recent
> kernels in relation to a test which basically fires lots of requests at
> it via NFS. The reporter of this problem gave me two bits of
> information: firstly that by eliminating all readdir calls from the
> test, the regression is never seen and secondly that oprofile showed
> that two functions related to vmalloc (rb_next, find_vmap_area,
> alloc_vmap_area in that order) were taking between them about 60% of the
> total cpu time.
>
> Now between the two kernel versions being tested, probably not a single
> line of GFS2 code for readdir has changed since that code has been
> stable for a fair while now. So my attention turned to vmalloc, even
> though it would be unusual for a filesystem to be limited by cpu, it did
> seem odd that it was so high in the oprofile result. I should also
> mention at this point that the backing device for the fs is a very high
> performance disk array, so that increases the chances of cpu being a
> limiting factor.
>
> Anyway, having looked briefly at the vmalloc code, I spotted that there
> was a cache of objects which might have an effect, so I wrote the test
> kernel module in the bz to test the two line patch just to see what
> effect it had.
>
> Since I got a good speed up, I sent the patch to the reporter who was
> able to get further on the NFS/GFS2 tests before running into the oops.
> I hadn't spotted that there had been a fix for that bug in the mean time
> though, so I'll get that applied. Thanks for pointing it out.
>
> We'll try and get some more testing done in order to try and prove
> whether the regression we are seeing in GFS2 readdir performance is
> entirely due to this factor, or only partially. I think it does have a
> measurable effect though, even if it is not the whole story,
>
> Steve.
>

Thanks for the explanation. It seems to be real issue.

I tested to see effect with flush during rb tree search.

Before I applied your patch, the time is 50300661 us.
After your patch, 11569357 us.
After my debug patch, 6104875 us.

I tested it as changing threshold value.

threshold time
1000 13892809
500 9062110
200 6714172
100 6104875
50 6758316

And perf shows smp_call_function is very low percentage.

In my cases, 100 is best.

I have no server machine so can't test TLB effect.
Could you meaure it with this patch?

Maybe you can see TLB effect with perf record like Nick was done.
You can refer db64fe02.
If you can't see sn_send_IPI_phys and smp_call_function in IA64,
maybe TLB issue isn't a big problem.

P.S)
I am not a full time developer but just hobbyist.
So I can't make patch and test in office.
Please, understand lazy response. :)

Here is just for debug patch.

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 8686b0f..ef6beb2 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -933,6 +933,9 @@ static struct ctl_table kern_table[] = {
{ }
};

+extern unsigned long max_lookup_count;
+extern unsigned long threshold_lookup_count;
+
static struct ctl_table vm_table[] = {
{
.procname = "overcommit_memory",
@@ -1251,6 +1254,22 @@ static struct ctl_table vm_table[] = {
.mode = 0644,
.proc_handler = scan_unevictable_handler,
},
+ {
+ .procname = "max_lookup_count",
+ .data = &max_lookup_count,
+ .maxlen = sizeof(max_lookup_count),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ },
+
+ {
+ .procname = "threshold_lookup_count",
+ .data = &threshold_lookup_count,
+ .maxlen = sizeof(threshold_lookup_count),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ },
+
#ifdef CONFIG_MEMORY_FAILURE
{
.procname = "memory_failure_early_kill",
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 7abf423..95a1390 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -319,6 +319,9 @@ static void __insert_vmap_area(struct vmap_area *va)

static void purge_vmap_area_lazy(void);

+unsigned long lookup_count;
+unsigned long max_lookup_count;
+unsigned long threshold_lookup_count = 100000;
/*
* Allocate a region of KVA of the specified size and alignment, within the
* vstart and vend.
@@ -332,6 +335,7 @@ static struct vmap_area *alloc_vmap_area(unsigned long size,
struct rb_node *n;
unsigned long addr;
int purged = 0;
+ int nlookup = 0;

BUG_ON(!size);
BUG_ON(size & ~PAGE_MASK);
@@ -344,6 +348,10 @@ static struct vmap_area *alloc_vmap_area(unsigned long size,
retry:
addr = ALIGN(vstart, align);

+ if (lookup_count > threshold_lookup_count) {
+ purge_vmap_area_lazy();
+ lookup_count = 0;
+ }
spin_lock(&vmap_area_lock);
if (addr + size - 1 < addr)
goto overflow;
@@ -364,6 +372,7 @@ retry:
first = tmp;
n = n->rb_right;
}
+ nlookup++;
} while (n);

if (!first)
@@ -371,6 +380,7 @@ retry:

if (first->va_end < addr) {
n = rb_next(&first->rb_node);
+ nlookup++;
if (n)
first = rb_entry(n, struct vmap_area, rb_node);
else
@@ -387,6 +397,8 @@ retry:
first = rb_entry(n, struct vmap_area, rb_node);
else
goto found;
+ nlookup++;
+
}
}
found:
@@ -396,6 +408,7 @@ overflow:
if (!purged) {
purge_vmap_area_lazy();
purged = 1;
+ nlookup = 0;
goto retry;
}
if (printk_ratelimit())
@@ -412,6 +425,9 @@ overflow:
va->va_end = addr + size;
va->flags = 0;
__insert_vmap_area(va);
+ if (nlookup > max_lookup_count)
+ max_lookup_count = nlookup;
+ lookup_count = nlookup;
spin_unlock(&vmap_area_lock);

return va;




--
Kind regards,
Minchan Kim




\
 
 \ /
  Last update: 2010-04-15 18:53    [W:0.094 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site