lkml.org 
[lkml]   [2010]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [git patches] libata fixes
    From
    Date
    On Fri, 2010-03-26 at 01:21 +0900, Tejun Heo wrote:
    > On 03/24/2010 03:06 AM, Pavel Roskin wrote:
    > > By all means, please push this patch to all stable kernels, or more
    > > money will be wasted on hard drives ;-)
    >
    > Oh, the original patch which caused the problem never saw the light of
    > the day before 2.6.34-rc1 so there's no stable kernel to push the
    > patch into.

    It looks like I'm still getting "clearing spurious IRQ". In most cases,
    it's not followed by anything, but in one case, there was a lost
    interrupt followed by a link reset.

    [ 5030.881191] ata2: clearing spurious IRQ
    [ 5060.950036] ata2: lost interrupt (Status 0x50)
    [ 5060.950055] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
    frozen
    [ 5060.950059] ata2.01: failed command: WRITE DMA
    [ 5060.950066] ata2.01: cmd ca/00:08:b7:11:a9/00:00:00:00:00/f0 tag 0
    dma 4096 out
    [ 5060.950068] res 40/00:00:00:4f:c2/00:00:00:00:00/10 Emask
    0x4 (timeout)
    [ 5060.950071] ata2.01: status: { DRDY }
    [ 5060.950080] ata2: soft resetting link
    [ 5061.160268] ata2.01: configured for UDMA/133
    [ 5061.160275] ata2.01: device reported invalid CHS sector 0
    [ 5061.160283] ata2: EH complete
    [80540.010652] ata2: clearing spurious IRQ

    That last line is apparently a separate event.

    --
    Regards,
    Pavel Roskin


    \
     
     \ /
      Last update: 2010-03-26 21:21    [W:0.020 / U:0.392 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site