lkml.org 
[lkml]   [2010]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm: convert arm to arch_gettimeoffset()
Date
(Against linux-next next-20100323)

Convert arm to use GENERIC_TIME via the arch_getoffset() infrastructure,
reducing the amount of arch specific code we need to maintain.

The arm architecture is the last arch that need to be converted.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
arch/arm/Kconfig | 26 ++++++++++++++
arch/arm/include/asm/mach/time.h | 2 +-
arch/arm/kernel/time.c | 70 +++----------------------------------
arch/arm/mach-at91/Kconfig | 1 +
4 files changed, 34 insertions(+), 65 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4bb7730..d77f934 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -42,6 +42,11 @@ config GENERIC_GPIO

config GENERIC_TIME
bool
+ default y
+
+config ARCH_USES_GETTIMEOFFSET
+ bool
+ default n

config GENERIC_CLOCKEVENTS
bool
@@ -231,6 +236,7 @@ config ARCH_AAEC2000
select CPU_ARM920T
select ARM_AMBA
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Agilent AAEC-2000

@@ -295,6 +301,7 @@ config ARCH_AT91
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
@@ -314,6 +321,7 @@ config ARCH_BCMRING
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Cirrus Logic 711x/721x based boards.

@@ -322,6 +330,7 @@ config ARCH_GEMINI
select CPU_FA526
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
help
Support for the Cortina Systems Gemini family SoCs

@@ -330,6 +339,7 @@ config ARCH_EBSA110
select CPU_SA110
select ISA
select NO_IOPORT
+ select ARCH_USES_GETTIMEOFFSET
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
@@ -346,6 +356,7 @@ config ARCH_EP93XX
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for the Cirrus EP93xx series of CPUs.

@@ -353,6 +364,7 @@ config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
select FOOTBRIDGE
+ select ARCH_USES_GETTIMEOFFSET
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -393,6 +405,7 @@ config ARCH_H720X
bool "Hynix HMS720x-based"
select CPU_ARM720T
select ISA_DMA_API
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Hynix HMS720x

@@ -404,6 +417,7 @@ config ARCH_IOP13XX
select PCI
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IOP13XX (XScale) family of processors.

@@ -415,6 +429,7 @@ config ARCH_IOP32X
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's 80219 and IOP32X (XScale) family of
processors.
@@ -427,6 +442,7 @@ config ARCH_IOP33X
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IOP33X (XScale) family of processors.

@@ -435,6 +451,7 @@ config ARCH_IXP23XX
depends on MMU
select CPU_XSC3
select PCI
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IXP23xx (XScale) family of processors.

@@ -443,6 +460,7 @@ config ARCH_IXP2000
depends on MMU
select CPU_XSCALE
select PCI
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IXP2400/2800 (XScale) family of processors.

@@ -461,6 +479,7 @@ config ARCH_L7200
bool "LinkUp-L7200"
select CPU_ARM720T
select FIQ
+ select ARCH_USES_GETTIMEOFFSET
help
Say Y here if you intend to run this kernel on a LinkUp Systems
L7200 Software Development Board which uses an ARM720T processor.
@@ -551,6 +570,7 @@ config ARCH_KS8695
select CPU_ARM922T
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
@@ -600,6 +620,7 @@ config ARCH_PNX4008
select CPU_ARM926T
select HAVE_CLK
select COMMON_CLKDEV
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for Philips PNX4008 mobile platform.

@@ -645,6 +666,7 @@ config ARCH_RPC
select ISA_DMA_API
select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE
+ select ARCH_USES_GETTIMEOFFSET
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -671,6 +693,7 @@ config ARCH_S3C2410
select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -684,6 +707,7 @@ config ARCH_S3C64XX
select ARM_VIC
select HAVE_CLK
select NO_IOPORT
+ select ARCH_USES_GETTIMEOFFSET
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select SAMSUNG_CLKSRC
@@ -740,6 +764,7 @@ config ARCH_SHARK
select ISA_DMA
select ZONE_DMA
select PCI
+ select ARCH_USES_GETTIMEOFFSET
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -749,6 +774,7 @@ config ARCH_LH7A40X
select CPU_ARM922T
select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
+ select ARCH_USES_GETTIMEOFFSET
help
Say Y here for systems based on one of the Sharp LH7A40X
System on a Chip processors. These CPUs include an ARM922T
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index 8bffc3f..35d408f 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -38,7 +38,7 @@ struct sys_timer {
void (*init)(void);
void (*suspend)(void);
void (*resume)(void);
-#ifndef CONFIG_GENERIC_TIME
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
unsigned long (*offset)(void);
#endif
};
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 2875380..38c261f 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -72,12 +72,15 @@ unsigned long profile_pc(struct pt_regs *regs)
EXPORT_SYMBOL(profile_pc);
#endif

-#ifndef CONFIG_GENERIC_TIME
-static unsigned long dummy_gettimeoffset(void)
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+u32 arch_gettimeoffset(void)
{
+ if (system_timer->offset != NULL)
+ return system_timer->offset() * 1000;
+
return 0;
}
-#endif
+#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */

#ifdef CONFIG_LEDS_TIMER
static inline void do_leds(void)
@@ -93,63 +96,6 @@ static inline void do_leds(void)
#define do_leds()
#endif

-#ifndef CONFIG_GENERIC_TIME
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = system_timer->offset();
- sec = xtime.tv_sec;
- usec += xtime.tv_nsec / 1000;
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- /* usec may have gone up a lot: be safe */
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irq(&xtime_lock);
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * done, and then undo it!
- */
- nsec -= system_timer->offset() * NSEC_PER_USEC;
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- ntp_clear();
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
- return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-#endif /* !CONFIG_GENERIC_TIME */

#ifndef CONFIG_GENERIC_CLOCKEVENTS
/*
@@ -214,10 +160,6 @@ device_initcall(timer_init_sysfs);

void __init time_init(void)
{
-#ifndef CONFIG_GENERIC_TIME
- if (system_timer->offset == NULL)
- system_timer->offset = dummy_gettimeoffset;
-#endif
system_timer->init();
}

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2db43a5..8a5e8e9 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -97,6 +97,7 @@ config ARCH_AT572D940HF

config ARCH_AT91X40
bool "AT91x40"
+ select ARCH_USES_GETTIMEOFFSET

endchoice

--
1.6.0.4


\
 
 \ /
  Last update: 2010-03-24 00:07    [W:0.032 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site