lkml.org 
[lkml]   [2010]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] HID: N-trig Add set feature commands to driver
On 03/22/2010 05:14 PM, Micki Balanga wrote:
> Hi
> first of all i am happy my explanation helps you to understand the
> necessity of fake finger report.
> The algorithm to analyze the information use complex math calculation,
> so it can't be transfer to the driver.
> (the driver should stay simple as possible, main purpose analyze USB
> message and transfer it to Linux events)
> As i mentioned before you talked about glitch a noise, which N-trig
> solution solve.
> The driver implement the necessary events needed by the user, in order
> to analyze touch events.

I'm not really much of a judge of how to balance kernel vs user land
load. Though I can certainly see why you would want to keep all
proprietary analysis to the user land and thus want to pass through
necessary events. I was "encouraged" earlier to take a deeper look at
what I was writing, and determine if all that I was trying to send was
actually necessary or just me missing something.

I will look more closely, and perhaps see if I can suggest modifications
which include the events you need without breaking the existing
protocol. Dmitry seems to be an authority on how input events should be
used. I'm still just learning myself.

But this still leaves the point of lets try to keep the split input
devices. It is still a cleaner abstraction than splitting in the user
space code.

> About a question you raised before about set_feature location, it should
> be done after the hw_start because
> if the HW start fail there is no reason to send the command. this
> command doesn't change the report descriptor size.

I'm still not entirely sure of the ordering of things. Users have sent
me the rdesc outputs from a device with 2.59 with and without your code
to enable MT, and it looked to me like the report descriptor was
different. I can try to experiment with that.

Can you specify conditions or versions which cause this failure? It
would be nice to be able to see for myself, especially since removing
the naming and the quirk will disrupt quite a number of users.

I do agree that the code should be more robust to bad conditions, so
please try it with:

list_for_each_entry(hidinput, &hdev->inputs, list) {
+ if (hidinput->report == NULL) {
+ dev_err(&hdev->dev, "NULL report\n");
+ continue;
+ }

That way we'll have a graceful fallback for your needs without breaking
users. And also, hopefully this will lead to finding any lingering bugs.


> -----Original Message-----
> From: Rafi Rubin [mailto:rafi@seas.upenn.edu]
> Sent: Mon 3/22/2010 10:43 PM
> To: Micki Balanga
> Cc: jkosina@suse.cz; chatty@enac.fr; peterhuewe@gmx.de;
> linux-input@vger.kernel.org; linux-kernel@vger.kernel.org; Henrik Rydberg
> Subject: Re: [PATCH 1/2] HID: N-trig Add set feature commands to driver
>
> On 03/22/2010 03:58 PM, Micki Balanga wrote:
> >
> > Hi
> > I would like to add more information about the Fake button.
> > I will explain using this scenario:
> > You touch the sensor with one finger and then remove the finger,
> > Firmware will report six frames with fake fingers,(Indicate end of
> session)
> > The driver will report this as fake fingers (Will send 3 events) and
> > input_sync
> > to inform user space application that the user removed finger from
> sensor.
> > this information is needed in order to analyze the data received from
> > N-trig firmware.
> > Micki
>
> Thank you for taking this to a discussion format.
>
> It seems you have raised an issue that is an active discussion for multi
> touch handling in general and an issue that I have considered for n-trig
> support in specific.
>
>
> The current published version of the driver does send one more sequence
> of events after it decides all fingers are off the screen. That final
> sequence is necessary to tell single touch drivers that the tools are
> released (BTN_TOUCH is set to zero, etc). This also resets the active
> contact count to zero for multi touch handlers, which look to see how
> many MT events come from each frame.
>
> I had observed that sometimes the tablet looses contacts semi
> arbitrarily, and we get a zero contact group as a mistake. In the
> patches I sent in early in February you will notice a solution that I
> was considering at the time. I was also playing with correcting for
> events that looked like real contacts but were also just noise. After
> rethinking my patches and reading the multi touch doc in the Documents
> tree, I chose to leave out these corrections.
>
> That being said, I do have a specific patch to handle the set of end of
> stream events. All that's needed is to count the empty groups and send
> the terminal events only when a counter hits the specified value
> (attached is a tiny patch I wrote when I needed that feature back really
> quickly when my screen started misbehaving during a meeting).
>
> Note I have submitted that as a patch for 2 reasons. First I couldn't
> be completely sure that there was a specific number of empty groups to
> signal end of stream which would be expected to be maintained over time.
> And secondly the erroneous termination of stream has not been much of
> a problem in general.
>
> You will note, that this is something that is simple enough that it
> makes perfect sense to put into the kernel. There's little point in
> wasting the cycles to push that decision to user space.
>



\
 
 \ /
  Last update: 2010-03-22 22:57    [W:0.044 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site