lkml.org 
[lkml]   [2010]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] staging: winbond: reg.c Coding style fixes.
On Sat, Mar 20, 2010 at 08:21:48PM +0100, Lars Lindley wrote:
>
>
> On 2010-03-20 17:24, Dan Carpenter wrote:
> > On Sat, Mar 20, 2010 at 04:14:11PM +0100, Lars Lindley wrote:
> >> I fixed all problems reported by checkpatch.pl except some
> >> (a lot of) long lines and some printk:s.
> >> I removed "commented away" code and version comments.
> >>
> >
> > [snip]
> >
> >> - msleep(10); // Modify 20051221.1.b
> >> - Wb35Reg_WriteSync( pHwData, 0x03d4, 0xb8 );// REG_ON RF_RSTN on, and
> >> - msleep(10); // Modify 20051221.1.b
> >
> > You removed this msleep().
> >
>
> Oops! I think I was fooled by the strange comment on the line before..
>
> >> -
> >> + if (pHwData->phy_type <= RF_MAXIM_V1)
> >> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0xffffff38);
> >> + else {
> >> + Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF);
> >> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
> >> + msleep(10);
> >> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and msleep(10); */
> >
> > In the new version it's commented out. ^^^^^^^^^^^^
> >
> > I used a program to try verify that only white space changed.
> > http://lkml.indiana.edu/hypermail/linux/kernel/1003.1/01012.html
> >
> > Then when it failed I grovelled through to find what changed.
> >
> > Actually my tool complained about removed parenthesis as well. I think
> > this patch only removes one set of parenthesis. Please don't do that.
> > With a patch this size, it's nice to be able to use tools to verify that
> > it doesn't change anything, instead of checking it by hand. Tabs, spaces
> > and newlines only, please.
> >
> Point taken. Will keep it in mind from now on..
>
> > Obviously in the next patch you can send the one liner that remove the
> > parenthesis. We can eyeball one liners quite quickly.
> >
> > regards,
> > dan carpenter
> >
>
>
> Here's a patch to fix my screw up :)
> Now the .o doesn't differ before and after..
>

Could you post your config? I would think the curly brace change would
have made a difference even if all the line number changes didn't.

regards,
dan carpenter

>
> [PATCH] staging: winbond: reg.c Fix accidental commenting of msleep(10)
>
> I accidentaly commented out msleep() in one place.
> This applies after previous patch:
> Message-Id: <1269098051-6594-1-git-send-email-lindley@coyote.org>
>
> Signed-off-by: Lars Lindley <lindley@coyote.org>
> ---
> drivers/staging/winbond/reg.c | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
> index 2bddf8f..d9a8128 100644
> --- a/drivers/staging/winbond/reg.c
> +++ b/drivers/staging/winbond/reg.c
> @@ -890,7 +890,8 @@ void Uxx_power_on_procedure(struct hw_data *pHwData)
> Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF);
> Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
> msleep(10);
> - Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and msleep(10); */
> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and */
> + msleep(10);
> ltmp = 0x4968;
> if ((pHwData->phy_type == RF_WB_242) ||
> (RF_WB_242_1 == pHwData->phy_type))
> --
> 1.7.0.2


\
 
 \ /
  Last update: 2010-03-21 10:17    [W:0.092 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site