lkml.org 
[lkml]   [2010]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] amba-clcd: add RGB444 support
On Mon, Mar 15, 2010 at 02:59:45PM +0100, Luotao Fu wrote:
> Hi Russell,
>
> On Mon, Mar 15, 2010 at 01:38:10PM +0000, Russell King - ARM Linux wrote:
> > On Mon, Mar 15, 2010 at 02:30:09PM +0100, Luotao Fu wrote:
> > > This one adds RGB444 (bpp=12) support to amba clcd drivers. Tested on a lpc3250
> > > based platform.
> >
> > No - this is wrong. You have a 16bpp display. bpp is the number of bits
> > in the framebuffer between two successive pixels. It is not the number of
> > bits used for the pixel information.
> >
>
> > The only case where you have a 12bpp display is if you have two pixels
> > packed into three bytes.
> >
> For 12bpp actually 16bits/pixel is used. I'm aware of that. That's the
> reason why the fb.var.bits_per_pixel is set to 16 in clcdfb_decode if
> it is originally set to 12 from the platform file to make usage of 16bpp
> display. omapfb driver does quite the same.

Then omapfb is also buggy and needs fixing in a similar manner.

The de-facto way of determining the bitfield structure is as I highlighted,
which is used by all the x86 drivers supporting RGB555 and RGB565.

We don't use bits_per_pixel=15 for RGB555, and using bits_per_pixel=12 for
RGB444 is wrong for all the same reasons.


\
 
 \ /
  Last update: 2010-03-15 15:17    [W:0.038 / U:4.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site