lkml.org 
[lkml]   [2010]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] hwmon: driver for TI tmp102 temperature sensor
Date
Driver for the TI TMP102.

Signed-off-by: Steven King <sfking@fdwdc.com>
---

The TI TMP102 is similar to the lm75. It differs from the lm75 by having a 16
bit conf register and the temp registers have a minimum resolution of 12bits;
the extended conf register can select 13 bit resolution (which this driver
does) and also change the update rate (which this driver currently doesn't
use).

V2: removed broken and unneeded detection routine,
made temperature conversion use base 1000 instead of base 100.
(per Jean Delvare's feed back)
incorporated fixes for the loop and made dev_pm_ops const.
(per Andrew Morton's patch)

Documentation/hwmon/tmp102 | 27 ++++
drivers/hwmon/Kconfig | 10 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/tmp102.c | 296 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 334 insertions(+), 0 deletions(-)

diff --git a/Documentation/hwmon/tmp102 b/Documentation/hwmon/tmp102
new file mode 100644
index 0000000..239dded
--- /dev/null
+++ b/Documentation/hwmon/tmp102
@@ -0,0 +1,27 @@
+Kernel driver tmp102
+====================
+
+Supported chips:
+ * Texas Instruments TMP102
+ Prefix: 'tmp102'
+ Addresses scanned: I2C 0x48 0x49 0x4a 0x4b
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp102.html
+
+Author:
+ Steven King <sfking@fdwdc.com>
+
+Description
+-----------
+
+The Texas Instruments TMP102 implements one temperature sensor. Limits can be
+set through the Overtemperature Shutdown register and Hysteresis register. The
+sensor is accurate to 0.5 degrees over the range of -25 to +85 C, and to 1.0
+degrees from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The
+operating temperature has a minimum of -55 C and a maximum of +150 C.
+
+The TMP102 has a programmable update rate that can select between 8, 4, 1, and
+0.5 Hz. (Currently the driver only supports the default of 4 Hz).
+
+The driver provides the common sysfs-interface for temperatures (see
+/Documentation/hwmon/sysfs-interface under Temperatures).
+
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 68cf877..cf9d7d3 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -812,6 +812,16 @@ config SENSORS_THMC50
This driver can also be built as a module. If so, the module
will be called thmc50.

+config SENSORS_TMP102
+ tristate "Texas Instruments TMP102 and compatibles"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Texas Instruments TMP102
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called tmp102.
+
config SENSORS_TMP401
tristate "Texas Instruments TMP401 and compatibles"
depends on I2C && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 4bc215c..0e5cf73 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -88,6 +88,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o
obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
+obj-$(CONFIG_SENSORS_TMP102) += tmp102.o
obj-$(CONFIG_SENSORS_TMP401) += tmp401.o
obj-$(CONFIG_SENSORS_TMP421) += tmp421.o
obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
new file mode 100644
index 0000000..e4816f6
--- /dev/null
+++ b/drivers/hwmon/tmp102.c
@@ -0,0 +1,296 @@
+/* Texas Instruments TMP102 SMBUS temperature sensor driver
+ *
+ * Copyright 2010 Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+#define DRIVER_NAME "tmp102"
+
+#define TMP102_TEMP_REG 0x00
+#define TMP102_CONF_REG 0x01
+/* note: these bit definitions are byte swapped */
+#define TMP102_CONF_SD 0x0100
+#define TMP102_CONF_TM 0x0200
+#define TMP102_CONF_POL 0x0400
+#define TMP102_CONF_F0 0x0800
+#define TMP102_CONF_F1 0x1000
+#define TMP102_CONF_R0 0x2000
+#define TMP102_CONF_R1 0x4000
+#define TMP102_CONF_OS 0x8000
+#define TMP102_CONF_EM 0x0010
+#define TMP102_CONF_AL 0x0020
+#define TMP102_CONF_CR0 0x0040
+#define TMP102_CONF_CR1 0x0080
+#define TMP102_TLOW_REG 0x02
+#define TMP102_THIGH_REG 0x03
+
+struct tmp102 {
+ struct device *hwmon_dev;
+ struct mutex lock;
+ unsigned long last_update;
+ int temp[3];
+};
+
+/* the TMP102 registers are big endian so we have to swab16 the values */
+static int tmp102_read_reg(struct i2c_client *client, u8 reg)
+{
+ int result = i2c_smbus_read_word_data(client, reg);
+ return result < 0 ? result : swab16(result);
+}
+
+static int tmp102_write_reg(struct i2c_client *client, u8 reg, u16 val)
+{
+ return i2c_smbus_write_word_data(client, reg, swab16(val));
+}
+
+/* convert left adjusted 13bit TMP102 register value to miliCelsius */
+static int tmp102_reg_to_mC(s16 val)
+{
+ return (val * 1000) / 128;
+}
+
+/* convert miliCelsius to left adjusted 13bit TMP102 register value */
+static u16 tmp102_mC_to_reg(int val)
+{
+ return (val * 128) / 1000;
+}
+
+static const u8 tmp102_reg[] = {
+ TMP102_TEMP_REG,
+ TMP102_TLOW_REG,
+ TMP102_THIGH_REG,
+};
+
+static struct tmp102 *tmp102_update_device(struct i2c_client *client)
+{
+ struct tmp102 *tmp102 = i2c_get_clientdata(client);
+
+ mutex_lock(&tmp102->lock);
+ if (time_after(jiffies, tmp102->last_update + HZ / 4)) {
+ int i;
+ for (i = 0; i < ARRAY_SIZE(tmp102->temp); ++i) {
+ int status = tmp102_read_reg(client, tmp102_reg[i]);
+ if (status > -1)
+ tmp102->temp[i] = tmp102_reg_to_mC(status);
+ }
+ tmp102->last_update = jiffies;
+ }
+ mutex_unlock(&tmp102->lock);
+ return tmp102;
+}
+
+static ssize_t tmp102_show_temp(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+ struct tmp102 *tmp102 = tmp102_update_device(to_i2c_client(dev));
+
+ return sprintf(buf, "%d\n", tmp102->temp[sda->index]);
+}
+
+static ssize_t tmp102_set_temp(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct tmp102 *tmp102 = i2c_get_clientdata(client);
+ long val;
+ int status = 0;
+
+ if ((strict_strtol(buf, 10, &val) < 0) || (abs(val) > 150000))
+ return -EINVAL;
+ mutex_lock(&tmp102->lock);
+ if (tmp102->temp[sda->index] != val) {
+ tmp102->temp[sda->index] = val;
+ status = tmp102_write_reg(client, tmp102_reg[sda->index],
+ tmp102_mC_to_reg(val));
+ }
+ mutex_unlock(&tmp102->lock);
+ return status ? : count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, tmp102_show_temp, NULL , 0);
+
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, tmp102_show_temp,
+ tmp102_set_temp, 1);
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, tmp102_show_temp,
+ tmp102_set_temp, 2);
+
+static struct attribute *tmp102_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group tmp102_attr_group = {
+ .attrs = tmp102_attributes,
+};
+
+#define TMP102_CONFIG (TMP102_CONF_TM | TMP102_CONF_EM | TMP102_CONF_CR1)
+#define TMP102_CONFIG_RD_ONLY (TMP102_CONF_R0 | TMP102_CONF_R1 | TMP102_CONF_AL)
+
+static int __devinit tmp102_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tmp102 *tmp102;
+ int status;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA)) {
+ dev_dbg(&client->dev, "adapter doesnt support SMBUS\n");
+ return -ENODEV;
+ }
+
+ tmp102 = kzalloc(sizeof(*tmp102), GFP_KERNEL);
+ if (!tmp102) {
+ dev_dbg(&client->dev, "kzalloc failed\n");
+ return -ENOMEM;
+ }
+ i2c_set_clientdata(client, tmp102);
+
+ tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONFIG);
+ status = tmp102_read_reg(client, TMP102_CONF_REG);
+ if (status < 0) {
+ dev_dbg(&client->dev, "error reading config register\n");
+ goto fail0;
+ }
+ status &= ~TMP102_CONFIG_RD_ONLY;
+ if (status != TMP102_CONFIG) {
+ dev_dbg(&client->dev, "could not verify config settings\n");
+ status = -EIO;
+ goto fail0;
+ }
+ tmp102->last_update = jiffies - HZ;
+ mutex_init(&tmp102->lock);
+
+ status = sysfs_create_group(&client->dev.kobj, &tmp102_attr_group);
+ if (status) {
+ dev_dbg(&client->dev, "could not create sysfs files\n");
+ goto fail0;
+ }
+ tmp102->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(tmp102->hwmon_dev)) {
+ dev_dbg(&client->dev, "unable to register hwmon device\n");
+ status = PTR_ERR(tmp102->hwmon_dev);
+ goto fail1;
+ }
+
+ dev_info(&client->dev, "initialized\n");
+
+ return 0;
+fail1:
+ sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
+fail0:
+ i2c_set_clientdata(client, NULL);
+ kfree(tmp102);
+
+ return 0;
+}
+
+static int __devexit tmp102_remove(struct i2c_client *client)
+{
+ struct tmp102 *tmp102 = i2c_get_clientdata(client);
+
+ /* shutdown the chip */
+ tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONF_SD);
+
+ hwmon_device_unregister(tmp102->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
+ i2c_set_clientdata(client, NULL);
+ kfree(tmp102);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int tmp102_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONF_SD);
+
+ return 0;
+}
+
+static int tmp102_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONFIG);
+
+ return 0;
+}
+
+static const struct dev_pm_ops tmp102_dev_pm_ops = {
+ .suspend = tmp102_suspend,
+ .resume = tmp102_resume,
+};
+
+#define TMP102_DEV_PM_OPS (&tmp102_dev_pm_ops)
+#else
+#define TMP102_DEV_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+static const unsigned short normal_i2c[] = {
+ 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END
+};
+
+static const struct i2c_device_id tmp102_id[] = {
+ { DRIVER_NAME, 0 },
+ { }
+};
+
+static struct i2c_driver tmp102_driver = {
+ .driver.name = DRIVER_NAME,
+ .driver.pm = TMP102_DEV_PM_OPS,
+ .class = I2C_CLASS_HWMON,
+ .probe = tmp102_probe,
+ .remove = __devexit_p(tmp102_remove),
+ .id_table = tmp102_id,
+ .address_list = normal_i2c,
+};
+
+static int __init tmp102_init(void)
+{
+ return i2c_add_driver(&tmp102_driver);
+}
+module_init(tmp102_init);
+
+static void __init tmp102_exit(void)
+{
+ i2c_del_driver(&tmp102_driver);
+}
+module_exit(tmp102_exit);
+
+
+MODULE_AUTHOR("Steven King <sfking@fdwdc.com>");
+MODULE_DESCRIPTION("Texas Instruments TMP102 temperature sensor driver");
+MODULE_LICENSE("GPL");

\
 
 \ /
  Last update: 2010-03-14 05:09    [W:0.073 / U:4.248 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site