[lkml]   [2010]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: bit errors on spitz
Andy Green wrote:

> I saw very similar failures for a long time on our iMX31 based device.
> Eventually I found a Freescale errata where the RAM inside the USB2
> macrocell started to make single bit errors below 1.38V Vcore; ours was
> 1.4V at that time but dipped on CPU load.

Good tip. It seems that nobody ported driver for the voltage control
chip ISL6271 from 2.4 kernel, and bootloader probably does not set
correct values.


Stanislav Brabec

 \ /
  Last update: 2010-03-11 16:43    [W:0.149 / U:37.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site