lkml.org 
[lkml]   [2010]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Regression? 2.6.23.16 -> 2.6.32.9: ide/libata HD recognition
Date
CaT wrote:
> Hi,
>
> Just had a strange situation with the above upgrade. It was done on an
> old server that used the serverworks ide driver. The IDE hw config under
> 2.6.23.16 was:
>
> hda: HD
> hdb: CDROM
> hdc: empty
> hdd: HD
>
> After upgrade, using either IDE or libata the config changed to:
>
> hda: HD
> hdb: CDROM
> hdc: empty
> hdd: empty
>
> The BIOS recognised the disk. I went through 3 disks and it wasn't until
> I made the second HD a master that it was recognised. So now I have a
> 2.6.32.9 server, using the IDE subsystem with the following config:
>
> hda: HD
> hdb: CDROM
> hdc: HD
> hdd: empty
>
> Otherwise it does not work.
>
> I had an outage window that I already blew so I was not able to do
> any more diagnosis than what it took to get the system up.
>
> If anyone wants the full config I'll send. Otherwise:
>
Could you "ls /sys/block" and post? And /var/log/messages from the start to the
last device found? Thanks.

--
Bill Davidsen <davidsen@tmr.com>
"We have more to fear from the bungling of the incompetent than from
the machinations of the wicked." - from Slashdot



\
 
 \ /
  Last update: 2010-03-10 19:51    [W:0.057 / U:0.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site