Messages in this thread | | | From | Peter Feuerer <> | Subject | [BUG] usb-serial / pl2302 corrupted receive | Date | Mon, 01 Mar 2010 19:07:00 +0100 |
| |
Hi Greg,
I tried to flash an AVR microcontroler via an USB to serial converter which uses pl2302 driver. It didn't work, so I set up following test to reproduce the bug:
I connected two pls2302 usb-serial converters to two different usb-ports of my machine and connected them with a rs232-nullmodem cable to each other.
Terminal1: cat /dev/ttyUSB1
Terminal2: while true; do echo 123456789012345678901234567890 > /dev/ttyUSB0 ; done
When both usb-serial converters are plugged in, the first few lines appear correctly on Terminal1. Then I noticed two different bahaviors:
1) The lines on Terminal1 are corrupted like: "1111111111111111111111123456789012345678901234567890"
2) The lines "123456789012345678901234567890" appear correctly on Terminal1 but when I kill the "cat" command and start it again, there's only one line and then no output anymore.
I verified this behavior on two different machines running the same kernel (version 2.6.32.9).
Additionally a calltrace is printed to dmesg (see end of mail)
I'm not 100% sure, but if I remember correctly was flashing AVR microcontrollers with pl2302 possible about the time when kernel 2.6.22 was released.
If you've got any questions I'd be pleased to help you.
best regards, --peter;
--- [piie@deskpiie ~]$ lsusb Bus 002 Device 013: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 002 Device 012: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
------------[ cut here ]------------ WARNING: at drivers/usb/serial/usb-serial.c:406 serial_write_room+0x74/0x80 [usbserial]() Hardware name: To Be Filled By O.E.M. Modules linked in: pl2303 usbserial sha256_generic aes_i586 aes_generic cbc ipv6 snd_hda_codec_nvhdmi usbhid hid snd_hda_codec_via snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_timer ohci_hcd snd soundcore coretemp snd_page_alloc nvidia(P) shpchp i2c_nforce2 ehci_hcd agpgart wmi psmouse thermal pci_hotplug i2c_core usbcore sg forcedeth button processor serio_raw vboxdrv evdev dm_crypt dm_mod fuse rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 sr_mod cdrom sd_mod pata_acpi ahci ata_generic libata scsi_mod Pid: 15, comm: events/0 Tainted: P W 2.6.32-ARCH #1 Call Trace: [<c104042e>] ? warn_slowpath_common+0x6e/0xb0 [<f8c634b4>] ? serial_write_room+0x74/0x80 [usbserial] [<c1040483>] ? warn_slowpath_null+0x13/0x20 [<f8c634b4>] ? serial_write_room+0x74/0x80 [usbserial] [<c11ddf15>] ? tty_write_room+0x15/0x20 [<c11db6a7>] ? process_echoes+0x47/0x2b0 [<c11dda85>] ? n_tty_receive_buf+0xe45/0x10c0 [<c1002374>] ? __switch_to+0x184/0x190 [<c103655b>] ? finish_task_switch+0x3b/0xa0 [<c12b77d9>] ? schedule+0x2f9/0xa30 [<f8e2cfea>] ? usb_autopm_do_interface+0x7a/0xe0 [usbcore] [<c11e023a>] ? flush_to_ldisc+0x14a/0x180 [<c11e00f0>] ? flush_to_ldisc+0x0/0x180 [<c1056f7f>] ? worker_thread+0x11f/0x260 [<c105adf0>] ? autoremove_wake_function+0x0/0x40 [<c1056e60>] ? worker_thread+0x0/0x260 [<c105ab44>] ? kthread+0x74/0x80 [<c105aad0>] ? kthread+0x0/0x80 [<c1004627>] ? kernel_thread_helper+0x7/0x10 ---[ end trace 4162a861717078f5 ]--- ------------[ cut here ]------------
| |