lkml.org 
[lkml]   [2010]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 22/30] hpsa: use scan_start and scan_finished entry points for scanning
From
Date
From: Stephen M. Cameron <scameron@beardog.cce.hp.com>

hpsa: use scan_start and scan_finished entry points for scanning and
route the CCISS_REGNEWD ioctl and sysfs triggering of same functionality
through hpsa_scan_start.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
---
drivers/scsi/hpsa.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++++---
drivers/scsi/hpsa.h | 3 +++
2 files changed, 55 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index e81df76..f889ec8 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -131,6 +131,9 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,

static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *));
+static void hpsa_scan_start(struct Scsi_Host *);
+static int hpsa_scan_finished(struct Scsi_Host *sh,
+ unsigned long elapsed_time);

static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
static int hpsa_slave_alloc(struct scsi_device *sdev);
@@ -177,6 +180,8 @@ static struct scsi_host_template hpsa_driver_template = {
.name = "hpsa",
.proc_name = "hpsa",
.queuecommand = hpsa_scsi_queue_command,
+ .scan_start = hpsa_scan_start,
+ .scan_finished = hpsa_scan_finished,
.this_id = -1,
.sg_tablesize = MAXSGENTRIES,
.use_clustering = ENABLE_CLUSTERING,
@@ -320,7 +325,7 @@ static int hpsa_scan_func(__attribute__((unused)) void *data)
h->busy_scanning = 1;
mutex_unlock(&hpsa_scan_mutex);
host_no = h->scsi_host ? h->scsi_host->host_no : -1;
- hpsa_update_scsi_devices(h, host_no);
+ hpsa_scan_start(h->scsi_host);
complete_all(&h->scan_wait);
mutex_lock(&hpsa_scan_mutex);
h->busy_scanning = 0;
@@ -2006,6 +2011,48 @@ static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
return 0;
}

+static void hpsa_scan_start(struct Scsi_Host *sh)
+{
+ struct ctlr_info *h = shost_to_hba(sh);
+ unsigned long flags;
+
+ /* wait until any scan already in progress is finished. */
+ while (1) {
+ spin_lock_irqsave(&h->scan_lock, flags);
+ if (h->scan_finished)
+ break;
+ spin_unlock_irqrestore(&h->scan_lock, flags);
+ wait_event(h->scan_wait_queue, h->scan_finished);
+ /* Note: We don't need to worry about a race between this
+ * thread and driver unload because the midlayer will
+ * have incremented the reference count, so unload won't
+ * happen if we're in here.
+ */
+ }
+ h->scan_finished = 0; /* mark scan as in progress */
+ spin_unlock_irqrestore(&h->scan_lock, flags);
+
+ hpsa_update_scsi_devices(h, h->scsi_host->host_no);
+
+ spin_lock_irqsave(&h->scan_lock, flags);
+ h->scan_finished = 1; /* mark scan as finished. */
+ wake_up_all(&h->scan_wait_queue);
+ spin_unlock_irqrestore(&h->scan_lock, flags);
+}
+
+static int hpsa_scan_finished(struct Scsi_Host *sh,
+ unsigned long elapsed_time)
+{
+ struct ctlr_info *h = shost_to_hba(sh);
+ unsigned long flags;
+ int finished;
+
+ spin_lock_irqsave(&h->scan_lock, flags);
+ finished = h->scan_finished;
+ spin_unlock_irqrestore(&h->scan_lock, flags);
+ return finished;
+}
+
static void hpsa_unregister_scsi(struct ctlr_info *h)
{
/* we are being forcibly unloaded, and may not refuse. */
@@ -2018,7 +2065,6 @@ static int hpsa_register_scsi(struct ctlr_info *h)
{
int rc;

- hpsa_update_scsi_devices(h, -1);
rc = hpsa_scsi_detect(h);
if (rc != 0)
dev_err(&h->pdev->dev, "hpsa_register_scsi: failed"
@@ -2619,7 +2665,7 @@ static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg)
case CCISS_DEREGDISK:
case CCISS_REGNEWDISK:
case CCISS_REGNEWD:
- hpsa_update_scsi_devices(h, dev->host->host_no);
+ hpsa_scan_start(h->scsi_host);
return 0;
case CCISS_GETPCIINFO:
return hpsa_getpciinfo_ioctl(h, argp);
@@ -3532,6 +3578,9 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev,
goto clean4;
}
spin_lock_init(&h->lock);
+ spin_lock_init(&h->scan_lock);
+ init_waitqueue_head(&h->scan_wait_queue);
+ h->scan_finished = 1; /* no scan currently in progress */

pci_set_drvdata(pdev, h);
memset(h->cmd_pool_bits, 0,
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 1ab0c1b..a0502b3 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -94,6 +94,9 @@ struct ctlr_info {
int nr_frees;
int busy_initializing;
int busy_scanning;
+ int scan_finished;
+ spinlock_t scan_lock;
+ wait_queue_head_t scan_wait_queue;
struct mutex busy_shutting_down;
struct list_head scan_list;
struct completion scan_wait;


\
 
 \ /
  Last update: 2010-02-04 15:45    [W:0.051 / U:1.944 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site