lkml.org 
[lkml]   [2010]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH v1 6/7] x86/PCI: use host bridge _CRS info by default on 2010 and newer machines
From
Date

The main benefit of using ACPI host bridge window information is that
we can do better resource allocation in systems with multiple host bridges.
Most of these systems are new, so this patch turns on "pci=use_crs"
only on machines with a BIOS date of 2010 or newer. In addition, it
whitelists a few older machines that are known to benefit.

We previously turned on "pci=use_crs" by default on *all* machines
(9e9f46c44e48), but had to revert that because of problems such
as Larry Finger's: http://lkml.org/lkml/2009/6/23/715.

I think the problem Larry saw was caused by overflowing the pci_bus
resource table. This patch should not affect Larry's machine directly
because it is older than 2010, but the table overflow should be fixed
by the previous patch in this series.

http://bugzilla.kernel.org/show_bug.cgi?id=14183

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
---

Documentation/kernel-parameters.txt | 8 +++-
arch/ia64/include/asm/acpi.h | 1
arch/x86/include/asm/pci_x86.h | 1
arch/x86/pci/acpi.c | 76 ++++++++++++++++++++++++++++++++---
arch/x86/pci/common.c | 3 +
drivers/acpi/pci_root.c | 1
include/acpi/acpi_drivers.h | 1
7 files changed, 83 insertions(+), 8 deletions(-)


diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 01e2a98..ca99c53 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1939,8 +1939,12 @@ and is between 256 and 4096 characters. It is defined in the file
IRQ routing is enabled.
noacpi [X86] Do not use ACPI for IRQ routing
or for PCI scanning.
- use_crs [X86] Use _CRS for PCI resource
- allocation.
+ use_crs [X86] Use PCI host bridge window information
+ from ACPI. On BIOSes from 2010 or later, this
+ is enabled by default. If you need to use this,
+ please report a bug.
+ nocrs [X86] Ignore PCI host bridge windows from ACPI.
+ If you need to use this, please report a bug.
routeirq Do IRQ routing for all PCI devices.
This is normally done in pci_enable_device(),
so this option is a temporary workaround
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index 7ae5889..7f2d7f2 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -97,6 +97,7 @@ ia64_acpi_release_global_lock (unsigned int *lock)
#endif
#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
static inline void disable_acpi(void) { }
+static inline void pci_acpi_crs_quirks(void) { }

const char *acpi_get_sysname (void);
int acpi_request_vector (u32 int_type);
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index b4bf9a9..05b58cc 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -29,6 +29,7 @@
#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
#define PCI_HAS_IO_ECS 0x40000
#define PCI_NOASSIGN_ROMS 0x80000
+#define PCI_ROOT_NO_CRS 0x100000

extern unsigned int pci_probe;
extern unsigned long pirq_table_addr;
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index a2f8cdb..fb044e3 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -15,6 +15,74 @@ struct pci_root_info {
int busnum;
};

+static int pci_use_crs; /* default is off */
+
+static int __init set_use_crs(const struct dmi_system_id *id)
+{
+ pci_use_crs = 1;
+ return 0;
+}
+
+static const struct dmi_system_id pci_use_crs_table[] __initconst = {
+ {
+ .callback = set_use_crs,
+ .ident = "IBM System x3800",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
+ },
+ },
+ {
+ .callback = set_use_crs,
+ .ident = "IBM System x3850",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
+ },
+ },
+ {
+ .callback = set_use_crs,
+ .ident = "IBM System x3950",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
+ },
+ },
+ {
+ .callback = set_use_crs,
+ .ident = "Toshiba Satellite A355",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A355"),
+ },
+ },
+ {}
+};
+
+void __init pci_acpi_crs_quirks(void)
+{
+ int year;
+
+ if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year >= 2010)
+ pci_use_crs = 1;
+
+ dmi_check_system(pci_use_crs_table);
+
+ /*
+ * If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that
+ * takes precedence over anything we figured out above.
+ */
+ if (pci_probe & PCI_ROOT_NO_CRS)
+ pci_use_crs = 0;
+ else if (pci_probe & PCI_USE__CRS)
+ pci_use_crs = 1;
+
+ printk(KERN_INFO "PCI: %s host bridge windows from ACPI; "
+ "if necessary, use \"pci=%s\" and report a bug\n",
+ pci_use_crs ? "Using" : "Ignoring",
+ pci_use_crs ? "nocrs" : "use_crs");
+}
+
static acpi_status
resource_to_addr(struct acpi_resource *resource,
struct acpi_resource_address64 *addr)
@@ -106,7 +174,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
res->child = NULL;
align_resource(info->bridge, res);

- if (!(pci_probe & PCI_USE__CRS)) {
+ if (!pci_use_crs) {
dev_printk(KERN_DEBUG, &info->bridge->dev,
"host bridge window %pR (ignored)\n", res);
return AE_OK;
@@ -137,12 +205,8 @@ get_current_resources(struct acpi_device *device, int busnum,
struct pci_root_info info;
size_t size;

- if (pci_probe & PCI_USE__CRS)
+ if (pci_use_crs)
pci_bus_remove_resources(bus);
- else
- dev_info(&device->dev,
- "ignoring host bridge windows from ACPI; "
- "boot with \"pci=use_crs\" to use them\n");

info.bridge = device;
info.bus = bus;
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index d2552c6..3736176 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -520,6 +520,9 @@ char * __devinit pcibios_setup(char *str)
} else if (!strcmp(str, "use_crs")) {
pci_probe |= PCI_USE__CRS;
return NULL;
+ } else if (!strcmp(str, "nocrs")) {
+ pci_probe |= PCI_ROOT_NO_CRS;
+ return NULL;
} else if (!strcmp(str, "earlydump")) {
pci_early_dump_regs = 1;
return NULL;
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 3810057..d127443 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -566,6 +566,7 @@ static int __init acpi_pci_root_init(void)
if (acpi_pci_disabled)
return 0;

+ pci_acpi_crs_quirks();
if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0)
return -ENODEV;

diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index f4906f6..3a4767c 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -104,6 +104,7 @@ int acpi_pci_bind_root(struct acpi_device *device);

struct pci_bus *pci_acpi_scan_root(struct acpi_device *device, int domain,
int bus);
+void pci_acpi_crs_quirks(void);

/* --------------------------------------------------------------------------
Processor


\
 
 \ /
  Last update: 2010-02-04 00:43    [W:0.093 / U:1.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site