lkml.org 
[lkml]   [2010]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: Other problem/regression with b9c61b70075c87a8612624736faf4a2de5b1ed30
Gary,

can you check this patch on your x3950?

Thanks

Yinghai

[PATCH] x86: fix out of order of gsi

found IBM x3950 will have problem after

|commit b9c61b70075c87a8612624736faf4a2de5b1ed30
|
| x86/pci: update pirq_enable_irq() to setup io apic routing

The problem is that with the patch, the machine freezes when
console=ttyS0,... kernel serial parameter is passed.
It seem to freeze at DVD initialization and the whole problem seem
to be DVD/pata related, but somehow exposed through the serial
parameter.
Such apic problems can expose really weird behavior..

<6>ACPI: IOAPIC (id[0x10] address[0xfecff000] gsi_base[0])
<6>IOAPIC[0]: apic_id 16, version 0, address 0xfecff000, GSI 0-2
<6>ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[3])
<6>IOAPIC[1]: apic_id 15, version 0, address 0xfec00000, GSI 3-38
<6>ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[39])
<6>IOAPIC[2]: apic_id 14, version 0, address 0xfec01000, GSI 39-74
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 1 global_irq 4 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 5 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 6 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 4 global_irq 7 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 6 global_irq 9 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 10 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 11 low edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 12 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 12 global_irq 15 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 13 global_irq 16 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 17 low edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 18 dfl dfl)
it turns out that system have three io apic controller. but put boot ioapic
routing in second one. and that gsi_base is not 0. it is using bunch of INT_SRC_OVR...

recent changes
1. one set routing for first io apic controller
2. assume irq = gsi
will break theat system.

so try to remap those gsi, need to seperate boot_ioapic_id detection out of enable_IO_APIC
and call them early.
introduce boot_ioapic_id, and remap_ioapic_gsi...

Reported-by: Iranna D Ankad <iranna.ankad@in.ibm.com>
Bisected-by: Iranna D Ankad <iranna.ankad@in.ibm.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: stable@kernel.org
Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
arch/x86/include/asm/io_apic.h | 3 +-
arch/x86/include/asm/mpspec.h | 1
arch/x86/kernel/acpi/boot.c | 27 +++++++++++++++++---
arch/x86/kernel/apic/io_apic.c | 55 ++++++++++++++++++++++++-----------------
4 files changed, 59 insertions(+), 27 deletions(-)
Index: linux-2.6/arch/x86/include/asm/io_apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/io_apic.h
+++ linux-2.6/arch/x86/include/asm/io_apic.h
@@ -113,6 +113,7 @@ struct IR_IO_APIC_route_entry {
*/
extern int nr_ioapics;
extern int nr_ioapic_registers[MAX_IO_APICS];
+extern int boot_ioapic_idx;

#define MP_MAX_IOAPIC_PIN 127

@@ -160,7 +161,7 @@ extern int io_apic_get_redir_entries(int
struct io_apic_irq_attr;
extern int io_apic_set_pci_routing(struct device *dev, int irq,
struct io_apic_irq_attr *irq_attr);
-void setup_IO_APIC_irq_extra(u32 gsi);
+void setup_IO_APIC_irq_extra(u32 gsi, unsigned int *irq);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
extern void ioapic_insert_resources(void);
Index: linux-2.6/arch/x86/include/asm/mpspec.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/mpspec.h
+++ linux-2.6/arch/x86/include/asm/mpspec.h
@@ -105,6 +105,7 @@ extern void mp_config_acpi_legacy_irqs(v
struct device;
extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level,
int active_high_low);
+int remap_ioapic_gsi(int ioapic, u32 gsi);
extern int acpi_probe_gsi(void);
#ifdef CONFIG_X86_IO_APIC
extern int mp_find_ioapic(int gsi);
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -449,7 +449,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned in

#ifdef CONFIG_X86_IO_APIC
if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
- setup_IO_APIC_irq_extra(gsi);
+ setup_IO_APIC_irq_extra(gsi, irq);
#endif

return 0;
@@ -1049,11 +1049,29 @@ static int mp_config_acpi_gsi(struct dev
return 0;
}

+int remap_ioapic_gsi(int ioapic, u32 gsi)
+{
+ int base_boot = mp_gsi_routing[boot_ioapic_idx].gsi_base;
+ int base_x;
+
+ if (!base_boot)
+ return gsi;
+
+ base_x = mp_gsi_routing[ioapic].gsi_base;
+ if (base_x < base_boot)
+ gsi += base_boot;
+ else if (base_x == base_boot)
+ gsi -= base_boot;
+
+ return gsi;
+}
+
int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
{
int ioapic;
int ioapic_pin;
struct io_apic_irq_attr irq_attr;
+ u32 plat_gsi;

if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
@@ -1074,12 +1092,13 @@ int mp_register_gsi(struct device *dev,
if (ioapic_renumber_irq)
gsi = ioapic_renumber_irq(ioapic, gsi);
#endif
+ plat_gsi = remap_ioapic_gsi(ioapic, gsi);

if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
"%d-%d\n", mp_ioapics[ioapic].apicid,
ioapic_pin);
- return gsi;
+ return plat_gsi;
}

if (enable_update_mptable)
@@ -1088,9 +1107,9 @@ int mp_register_gsi(struct device *dev,
set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
- io_apic_set_pci_routing(dev, gsi, &irq_attr);
+ io_apic_set_pci_routing(dev, plat_gsi, &irq_attr);

- return gsi;
+ return plat_gsi;
}

/*
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -84,6 +84,7 @@ int nr_ioapic_registers[MAX_IO_APICS];
/* I/O APIC entries */
struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
int nr_ioapics;
+int boot_ioapic_idx;

/* IO APIC gsi routing info */
struct mp_ioapic_gsi mp_gsi_routing[MAX_IO_APICS];
@@ -1028,13 +1029,18 @@ static int pin_2_irq(int idx, int apic,
if (test_bit(bus, mp_bus_not_pci)) {
irq = mp_irqs[idx].srcbusirq;
} else {
- /*
- * PCI IRQs are mapped in order
- */
- i = irq = 0;
- while (i < apic)
- irq += nr_ioapic_registers[i++];
- irq += pin;
+ if (!acpi_ioapic) {
+ /*
+ * PCI IRQs are mapped in order
+ */
+ i = irq = 0;
+ while (i < apic)
+ irq += nr_ioapic_registers[i++];
+ irq += pin;
+ } else {
+ irq = pin + mp_gsi_routing[apic].gsi_base;
+ irq = remap_ioapic_gsi(apic, irq);
+ }
/*
* For MPS mode, so far only needed by ES7000 platform
*/
@@ -1473,9 +1479,10 @@ static struct {
DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
} mp_ioapic_routing[MAX_IO_APICS];

-static void __init setup_IO_APIC_irqs(void)
+
+static void __init setup_IO_APIC_irqs(int apic_id)
{
- int apic_id = 0, pin, idx, irq;
+ int pin, idx, irq;
int notcon = 0;
struct irq_desc *desc;
struct irq_cfg *cfg;
@@ -1483,14 +1490,6 @@ static void __init setup_IO_APIC_irqs(vo

apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");

-#ifdef CONFIG_ACPI
- if (!acpi_disabled && acpi_ioapic) {
- apic_id = mp_find_ioapic(0);
- if (apic_id < 0)
- apic_id = 0;
- }
-#endif
-
for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
idx = find_irq_entry(apic_id, pin, mp_INT);
if (idx == -1) {
@@ -1545,7 +1544,7 @@ static void __init setup_IO_APIC_irqs(vo
* but could not use acpi_register_gsi()
* like some special sci in IBM x3330
*/
-void setup_IO_APIC_irq_extra(u32 gsi)
+void setup_IO_APIC_irq_extra(u32 gsi, unsigned int *pirq)
{
int apic_id = 0, pin, idx, irq;
int node = cpu_to_node(boot_cpu_id);
@@ -1565,6 +1564,7 @@ void setup_IO_APIC_irq_extra(u32 gsi)
return;

irq = pin_2_irq(idx, apic_id, pin);
+ *pirq = irq;
#ifdef CONFIG_SPARSE_IRQ
desc = irq_to_desc(irq);
if (desc)
@@ -1940,11 +1940,10 @@ __apicdebuginit(int) print_ICs(void)

fs_initcall(print_ICs);

-
/* Where if anywhere is the i8259 connect in external int mode */
static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };

-void __init enable_IO_APIC(void)
+static void __init probe_ioapic_i8259(void)
{
union IO_APIC_reg_01 reg_01;
int i8259_apic, i8259_pin;
@@ -2001,7 +2000,12 @@ void __init enable_IO_APIC(void)
{
printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
}
+}

+void __init enable_IO_APIC(void)
+{
+ if (!nr_legacy_irqs)
+ return;
/*
* Do not trust the IO-APIC being empty at bootup
*/
@@ -3126,7 +3130,6 @@ out:

void __init setup_IO_APIC(void)
{
-
/*
* calling enable_IO_APIC() is moved to setup_local_APIC for BP
*/
@@ -3139,7 +3142,15 @@ void __init setup_IO_APIC(void)
x86_init.mpparse.setup_ioapic_ids();

sync_Arb_IDs();
- setup_IO_APIC_irqs();
+ probe_ioapic_i8259();
+ boot_ioapic_idx = ioapic_i8259.apic;
+#ifdef CONFIG_ACPI
+ if (!acpi_disabled && acpi_ioapic && boot_ioapic_idx < 0)
+ boot_ioapic_idx = mp_find_ioapic(0);
+#endif
+ if (boot_ioapic_idx < 0)
+ boot_ioapic_idx = 0;
+ setup_IO_APIC_irqs(boot_ioapic_idx);
init_IO_APIC_traps();
if (nr_legacy_irqs)
check_timer();

\
 
 \ /
  Last update: 2010-02-23 10:11    [from the cache]
©2003-2011 Jasper Spaans