lkml.org 
[lkml]   [2010]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectpm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
Hi,

I wonder if this is the write place to post this issue to, but I have a
proplem when trying go suspend or hibernate my system. after enabling
pm_trace by:

echo 1 > /sys/power/pm_trace
and then issuing pm-suspend, I get the following in dmesg:

[ 685.833275] PM: Entering mem sleep
[ 685.833292] Suspending console(s) (use no_console_suspend to debug)
[ 685.993399] pm_op(): usb_dev_suspend+0x0/0x10 returns -2
[ 685.993404] PM: Device usb2 failed to suspend: error -2
[ 685.993408] PM: Some devices failed to suspend
[ 685.997009] PM: resume devices took 0.000 seconds
[ 685.997169] PM: Finishing wakeup.

this is on 2.6.32.8, but on 2.6.33-rc8 I get the same results.

trying to find out what device this is:

$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0bda:0159 Realtek Semiconductor Corp.
Bus 001 Device 004: ID 04f2:b16c Chicony Electronics Co., Ltd
Bus 001 Device 005: ID 03f0:231d Hewlett-Packard
Bus 001 Device 002: ID 8087:0020
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

my persumption is that "Device usb2" would be device 002 on bus 001
above, that is, 8087:0020. googling for this USB id I found some
references here: http://forum.notebookreview.com/showthread.php?p=5906076 :

Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub


I wonder what could be done to make this device not sabotage the suspend
process?


Akos


\
 
 \ /
  Last update: 2010-02-23 09:43    [from the cache]
©2003-2011 Jasper Spaans