lkml.org 
[lkml]   [2010]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/3] MFD: introduce lpc_sch for Intel SCH LPC bridge
Hi Denis,

On Thu, Feb 18, 2010 at 08:01:33PM +0200, Denis Turischev wrote:
> Intel Poulsbo (SCH) chipset LPC bridge controller contains several
> functions. Creating and MFD driver for the LPC bridge controller allows
> simultaneous use of SMBus and GPIO interfaces on the SCH.
>
> v2: added "select MFD_CORE"
> v3: removed "default m"
>
> Signed-off-by: Denis Turischev <denis@compulab.co.il>
patch applied, many thanks.

Cheers,
Samuel.


> diff -Nru linux-2.6.33-rc7.orig/drivers/mfd/Kconfig linux-2.6.33-rc7/drivers/mfd/Kconfig
> --- linux-2.6.33-rc7.orig/drivers/mfd/Kconfig 2010-02-07 00:17:12.000000000 +0200
> +++ linux-2.6.33-rc7/drivers/mfd/Kconfig 2010-02-18 19:56:19.000000000 +0200
> @@ -348,6 +348,14 @@
> read/write functions for the devices to get access to this chip.
> This chip embeds various other multimedia funtionalities as well.
>
> +config LPC_SCH
> + tristate "Intel SCH LPC"
> + depends on PCI
> + select MFD_CORE
> + help
> + LPC bridge function of the Intel SCH provides support for
> + System Management Bus and General Purpose I/O.
> +
> endmenu
>
> menu "Multimedia Capabilities Port drivers"
> diff -Nru linux-2.6.33-rc7.orig/drivers/mfd/lpc_sch.c linux-2.6.33-rc7/drivers/mfd/lpc_sch.c
> --- linux-2.6.33-rc7.orig/drivers/mfd/lpc_sch.c 1970-01-01 02:00:00.000000000 +0200
> +++ linux-2.6.33-rc7/drivers/mfd/lpc_sch.c 2010-02-11 10:31:54.000000000 +0200
> @@ -0,0 +1,133 @@
> +/*
> + * lpc_sch.c - LPC interface for Intel Poulsbo SCH
> + *
> + * LPC bridge function of the Intel SCH contains many other
> + * functional units, such as Interrupt controllers, Timers,
> + * Power Management, System Management, GPIO, RTC, and LPC
> + * Configuration Registers.
> + *
> + * Copyright (c) 2010 CompuLab Ltd
> + * Author: Denis Turischev <denis@compulab.co.il>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License 2 as published
> + * by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; see the file COPYING. If not, write to
> + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/errno.h>
> +#include <linux/acpi.h>
> +#include <linux/pci.h>
> +#include <linux/mfd/core.h>
> +
> +#define SMBASE 0x40
> +#define SMBUS_IO_SIZE 64
> +
> +#define GPIOBASE 0x44
> +#define GPIO_IO_SIZE 64
> +
> +static struct resource smbus_sch_resource = {
> + .flags = IORESOURCE_IO,
> +};
> +
> +
> +static struct resource gpio_sch_resource = {
> + .flags = IORESOURCE_IO,
> +};
> +
> +static struct mfd_cell lpc_sch_cells[] = {
> + {
> + .name = "isch_smbus",
> + .num_resources = 1,
> + .resources = &smbus_sch_resource,
> + },
> + {
> + .name = "sch_gpio",
> + .num_resources = 1,
> + .resources = &gpio_sch_resource,
> + },
> +};
> +
> +static struct pci_device_id lpc_sch_ids[] = {
> + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC) },
> + { 0, }
> +};
> +MODULE_DEVICE_TABLE(pci, lpc_sch_ids);
> +
> +static int __devinit lpc_sch_probe(struct pci_dev *dev,
> + const struct pci_device_id *id)
> +{
> + unsigned int base_addr_cfg;
> + unsigned short base_addr;
> +
> + pci_read_config_dword(dev, SMBASE, &base_addr_cfg);
> + if (!(base_addr_cfg & (1 << 31))) {
> + dev_err(&dev->dev, "Decode of the SMBus I/O range disabled\n");
> + return -ENODEV;
> + }
> + base_addr = (unsigned short)base_addr_cfg;
> + if (base_addr == 0) {
> + dev_err(&dev->dev, "I/O space for SMBus uninitialized\n");
> + return -ENODEV;
> + }
> +
> + smbus_sch_resource.start = base_addr;
> + smbus_sch_resource.end = base_addr + SMBUS_IO_SIZE - 1;
> +
> + pci_read_config_dword(dev, GPIOBASE, &base_addr_cfg);
> + if (!(base_addr_cfg & (1 << 31))) {
> + dev_err(&dev->dev, "Decode of the GPIO I/O range disabled\n");
> + return -ENODEV;
> + }
> + base_addr = (unsigned short)base_addr_cfg;
> + if (base_addr == 0) {
> + dev_err(&dev->dev, "I/O space for GPIO uninitialized\n");
> + return -ENODEV;
> + }
> +
> + gpio_sch_resource.start = base_addr;
> + gpio_sch_resource.end = base_addr + GPIO_IO_SIZE - 1;
> +
> + return mfd_add_devices(&dev->dev, -1,
> + lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, 0);
> +}
> +
> +static void __devexit lpc_sch_remove(struct pci_dev *dev)
> +{
> + mfd_remove_devices(&dev->dev);
> +}
> +
> +static struct pci_driver lpc_sch_driver = {
> + .name = "lpc_sch",
> + .id_table = lpc_sch_ids,
> + .probe = lpc_sch_probe,
> + .remove = __devexit_p(lpc_sch_remove),
> +};
> +
> +static int __init lpc_sch_init(void)
> +{
> + return pci_register_driver(&lpc_sch_driver);
> +}
> +
> +static void __exit lpc_sch_exit(void)
> +{
> + pci_unregister_driver(&lpc_sch_driver);
> +}
> +
> +module_init(lpc_sch_init);
> +module_exit(lpc_sch_exit);
> +
> +MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
> +MODULE_DESCRIPTION("LPC interface for Intel Poulsbo SCH");
> +MODULE_LICENSE("GPL");
> diff -Nru linux-2.6.33-rc7.orig/drivers/mfd/Makefile linux-2.6.33-rc7/drivers/mfd/Makefile
> --- linux-2.6.33-rc7.orig/drivers/mfd/Makefile 2010-02-07 00:17:12.000000000 +0200
> +++ linux-2.6.33-rc7/drivers/mfd/Makefile 2010-02-10 15:15:40.000000000 +0200
> @@ -55,4 +55,5 @@
> obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
> obj-$(CONFIG_AB4500_CORE) += ab4500-core.o
> obj-$(CONFIG_MFD_88PM8607) += 88pm8607.o
> -obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
> \ No newline at end of file
> +obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
> +obj-$(CONFIG_LPC_SCH) += lpc_sch.o

--
Intel Open Source Technology Centre
http://oss.intel.com/


\
 
 \ /
  Last update: 2010-02-19 11:31    [W:0.445 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site