lkml.org 
[lkml]   [2010]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH] Input: serio - re-add thaw (and add freeze)
From
On 2/4/10, Alan Jenkins <alan-jenkins@tuffmail.co.uk> wrote:
> Dmitry Torokhov wrote:
>> On Wed, Feb 03, 2010 at 06:59:54PM +0000, Alan Jenkins wrote:
>>
>>> 633aae2 "Input: i8042 - switch to using dev_pm_ops"
>>> removed handling for PMSG_THAW, causing obscure breakage.
>>>
>>> It can break if you press keys during hibernation,
>>> which causes subsequent keypresses to be lost -
>>> so you can't cancel s2disk by pressing backspace -
>>> and then just before system poweroff you get
>>> "psmouse.c: Failed to deactivate mouse".
>>>
>>> So let's add the thaw handler back.
>>>
>>> Also set the freeze handler. It looks like PMSG_FREEZE
>>> didn't do anything in the past, but I think that must
>>> have been an oversight.
>>>
>>
>> We do not need to do anything special at freeze time that is why there
>> wasn't freeze handler. And so thaw should be pretty much noop as well.

Ok, so I did some more mindless fiddling. It seems that all it needs
is to call the interrupt handler at thaw time.

Regards
Alan

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index d84a36e..b54aee7 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -1161,9 +1161,17 @@ static int i8042_pm_restore(struct device *dev)
return 0;
}

+static int i8042_pm_thaw(struct device *dev)
+{
+ i8042_interrupt(0, NULL);
+
+ return 0;
+}
+
static const struct dev_pm_ops i8042_pm_ops = {
.suspend = i8042_pm_reset,
.resume = i8042_pm_restore,
+ .thaw = i8042_pm_thaw,
.poweroff = i8042_pm_reset,
.restore = i8042_pm_restore,
};

\
 
 \ /
  Last update: 2010-02-16 17:51    [W:0.113 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site