Messages in this thread | | | From | ST <> | Subject | Re: 2.6.33-rc7 problems | Date | Sat, 13 Feb 2010 00:18:42 +0100 |
| |
Hi Robert > Can you post > the full dmesg from 2.6.32 when connecting the drive? The dmesg when connecting the drive is attached. This is from a Fedora 12 installation. Hopefully this is enough?
Mh, it seems as if the following lines are missing in the failing case?: Initializing USB Mass Storage driver... scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device scan complete
Is there probably a wrong driver bound to the wrong driver? (Didn't find anything suspicious under /sysfs) Why is "usb_stor_init" not called?
I just tried to get a working kernel by using "make localyesconfig" under fedora. But it still only detects the the SD card...
Thank you very much for your help. ST
The Fedora 12 installation with 2.6.31.5-127.fc12.x86_64: udev: starting version 145 usb 1-4.3: new high speed USB device using ehci_hcd and address 6 usb 1-4.3: New USB device found, idVendor=058f, idProduct=6364 usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4.3: Product: Mass Storage Device usb 1-4.3: Manufacturer: Generic usb 1-4.3: SerialNumber: 058F63646476 usb 1-4.3: configuration #1 chosen from 1 choice generic-usb: probe of 0003:058F:6364.0003 failed with error -22 Initializing USB Mass Storage driver... scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device scan complete scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 scsi 8:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 scsi 8:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0 scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS sd 8:0:0:0: Attached scsi generic sg3 type 0 sd 8:0:0:1: Attached scsi generic sg4 type 0 sd 8:0:0:2: Attached scsi generic sg5 type 0 sd 8:0:0:3: Attached scsi generic sg6 type 0 sd 8:0:0:2: [sde] Attached SCSI removable disk sd 8:0:0:0: [sdc] Attached SCSI removable disk sd 8:0:0:3: [sdf] Attached SCSI removable disk sd 8:0:0:1: [sdd] 15858864 512-byte logical blocks: (8.11 GB/7.56 GiB) sd 8:0:0:1: [sdd] Write Protect is off sd 8:0:0:1: [sdd] Mode Sense: 03 00 00 00 sd 8:0:0:1: [sdd] Assuming drive cache: write through sd 8:0:0:1: [sdd] Assuming drive cache: write through sdd: sdd1 sdd2 sd 8:0:0:1: [sdd] Assuming drive cache: write through sd 8:0:0:1: [sdd] Attached SCSI removable disk
The failure without usb block debug output: hub 1-4:1.0: state 7 ports 4 chg 0000 evt 0008 hub 1-4:1.0: port 3, status 0101, change 0001, 12 Mb/s hub 1-4:1.0: debounce: port 3: total 100ms stable 100ms status 0x101 hub 1-4:1.0: port 3 not reset yet, waiting 10ms usb 1-4.3: new high speed USB device using ehci_hcd and address 6 hub 1-4:1.0: port 3 not reset yet, waiting 10ms usb 1-4.3: skipped 1 descriptor after interface usb 1-4.3: default language 0x0409 usb 1-4.3: udev 6, busnum 1, minor = 5 usb 1-4.3: New USB device found, idVendor=058f, idProduct=6364 usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4.3: Product: Mass Storage Device usb 1-4.3: Manufacturer: Generic usb 1-4.3: SerialNumber: 058F63646476 usb 1-4.3: uevent usb 1-4.3: usb_probe_device usb 1-4.3: configuration #1 chosen from 1 choice usb 1-4.3: adding 1-4.3:1.0 (config #1, interface 0) usb 1-4.3:1.0: uevent usb-storage 1-4.3:1.0: usb_probe_interface usb-storage 1-4.3:1.0: usb_probe_interface - got id scsi8 : usb-storage 1-4.3:1.0 usb 1-4.3: adding 1-4.3:1.1 (config #1, interface 1) usb 1-4.3:1.1: uevent usbhid 1-4.3:1.1: usb_probe_interface usbhid 1-4.3:1.1: usb_probe_interface - got id generic-usb: probe of 0003:058F:6364.0003 failed with error -22 drivers/usb/core/inode.c: creating file '006' hub 1-4:1.0: state 7 ports 4 chg 0000 evt 0008 usb 1-4.3: uevent scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 sd 8:0:0:0: [sdc] Attached SCSI removable disk usb 1-4.3:1.0: uevent usb 1-4.3: uevent usb 1-4.3:1.0: uevent
| |