Messages in this thread | | | Date | Thu, 11 Feb 2010 23:18:49 +0100 | From | Axel Uhl <> | Subject | Re: Kernel Bug in ATA or SMART area |
| |
I had the same problem on a 2.6.28.
Best, -- Axel
Maciej Rutecki wrote: > (CCs added) > > Is older kernels work fine? > > Dnia środa, 10 lutego 2010 o 12:10:18 Axel Uhl napisał(a): >> I get intermittent kernel exceptions, probably related to an issue with >> the ATA or SMART code in the kernel / modules. I have a cron job that >> every so many hours captures the disk temperatures. I "hdparm -y" my >> disks when they are not used. It seems that when the cron job runs that >> spins up the disks to access their temperature using smartctl, if during >> this time certain other interactions happen, the kernel raises an >> exception. >> >> The smartctl command I'm using is: >> >> /usr/sbin/smartctl -a $devfull >/var/local/snmp/smart-$dev.TMP >> >> Here is one such exception from the syslog: >> >> Feb 10 06:57:01 homemp3 /USR/SBIN/CRON[18271]: (root) CMD >> (/etc/snmp/local-snmp-cronjob-spinup) >> Feb 10 06:57:06 homemp3 vdr: [3293] connect from 127.0.0.1, port 59975 - >> accepted >> Feb 10 06:57:06 homemp3 vdr: [3293] closing SVDRP connection >> Feb 10 06:57:09 homemp3 kernel: ata5.00: exception Emask 0x0 SAct 0x0 >> SErr 0x0 action 0x6 frozen >> Feb 10 06:57:09 homemp3 kernel: ata5.00: failed command: SMART >> Feb 10 06:57:09 homemp3 kernel: ata5.00: cmd >> b0/da:00:00:4f:c2/00:00:00:00:00/00 >> tag 0 >> Feb 10 06:57:09 homemp3 kernel: res >> 40/00:01:00:00:00/00:00:00:00:00/00 >> Emask 0x4 (timeout) >> Feb 10 06:57:09 homemp3 kernel: ata5.00: status: { DRDY } >> Feb 10 06:57:10 homemp3 kernel: irq 10: nobody cared (try booting with >> the "irqpoll" option) >> Feb 10 06:57:10 homemp3 kernel: Pid: 17050, comm: hadam3p_um_6.14 Not >> tainted 2.6.32.7 #1 >> Feb 10 06:57:10 homemp3 kernel: Call Trace: >> Feb 10 06:57:10 homemp3 kernel: [<c128a221>] ? printk+0x18/0x1a >> Feb 10 06:57:10 homemp3 kernel: [<c103aaf8>] __report_bad_irq+0x27/0x85 >> Feb 10 06:57:10 homemp3 kernel: [<c103ac9e>] note_interrupt+0x148/0x186 >> Feb 10 06:57:10 homemp3 kernel: [<c103b292>] handle_level_irq+0x86/0xb1 >> Feb 10 06:57:10 homemp3 kernel: [<c1004722>] handle_irq+0x1a/0x28 >> Feb 10 06:57:10 homemp3 kernel: [<c100434c>] do_IRQ+0x33/0x80 >> Feb 10 06:57:10 homemp3 kernel: [<c11d73fb>] ? pdc_interrupt+0x150/0x3a5 >> Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30 >> Feb 10 06:57:10 homemp3 kernel: [<c101cd72>] ? __do_softirq+0x33/0xec >> Feb 10 06:57:10 homemp3 kernel: [<c1039e00>] ? handle_IRQ_event+0x31/0xc1 >> Feb 10 06:57:10 homemp3 kernel: [<c101ce55>] do_softirq+0x2a/0x2f >> Feb 10 06:57:10 homemp3 kernel: [<c101cf34>] irq_exit+0x2a/0x2f >> Feb 10 06:57:10 homemp3 kernel: [<c1004355>] do_IRQ+0x3c/0x80 >> Feb 10 06:57:10 homemp3 kernel: [<c1003b81>] ? >> do_device_not_available+0x0/0x48 >> Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30 >> Feb 10 06:57:10 homemp3 kernel: handlers: >> Feb 10 06:57:10 homemp3 kernel: [<c11d72ab>] (pdc_interrupt+0x0/0x3a5) >> Feb 10 06:57:10 homemp3 kernel: [<c11d3504>] (ata_sff_interrupt+0x0/0xc4) >> Feb 10 06:57:10 homemp3 kernel: [<f83a6767>] (azx_interrupt+0x0/0x11b >> [snd_hda_intel]) >> Feb 10 06:57:10 homemp3 kernel: [<f8106471>] (usb_hcd_irq+0x0/0x5e >> [usbcore]) >> Feb 10 06:57:10 homemp3 kernel: [<f8062bf9>] (e1000_intr+0x0/0xf2 [e1000]) >> Feb 10 06:57:10 homemp3 kernel: Disabling IRQ #10 >> Feb 10 06:57:10 homemp3 kernel: ata5: soft resetting link >> Feb 10 06:57:11 homemp3 kernel: ata5.00: configured for UDMA/133 >> Feb 10 06:57:11 homemp3 kernel: ata5: EH complete >> >> >> I suppose the hadam3p_um_6.14 command is part of my BOINC installation, >> doing a climate simulation. However, the problem has also occurred with >> this program not running. >> >> Here's the output of scripts/ver_linux: >> >> If some fields are empty or look unusual you may have an old version. >> Compare to the current minimal requirements in Documentation/Changes. >> >> Linux homemp3 2.6.32.7 #1 Sat Feb 6 10:50:05 CET 2010 i686 GNU/Linux >> >> Gnu C 4.3.2 >> Gnu make 3.81 >> binutils 2.18.0.20080103 >> util-linux 2.13.1.1 >> mount 2.13.1.1 >> module-init-tools found >> Linux C Library 2.7 >> Dynamic linker (ldd) 2.7 >> Procps 3.2.7 >> Console-tools 0.2.3 >> Sh-utils 6.10 >> udev 125 >> Modules Loaded ipv6 bsd_comp usb_storage ppp_deflate >> zlib_deflate ppp_ge >> neric slhc w83627hf hwmon_vid hwmon i2c_dev saa7134_alsa >> snd_hda_codec_realtek tuner_simple tuner_types mt352 snd_hda_intel >> saa7134_dvb snd_hda_codec videobuf_dvb snd_pcm_oss snd_mixer_oss >> dvb_core snd_pcm snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event >> 8250_pnp snd_seq 8250 serial_core snd_timer snd_seq_device >> saa7134 ehci_hcd ir_common snd v4l2_common videodev v4l1_compat >> soundcore snd_page_alloc videobuf_dma_sg videobuf_core tveeprom usbcore >> via_rhine i2c_core e1000 >> >> >> As a result of the exception, the system becomes very unresponsive. Any >> sort of I/O seems to have very poor response time. Ping times in the >> gigabit network suddenly take several tens of milliseconds. It seems >> this may have to do with the IRQ10 being somehow affected, but I'm not >> sure. >> >> /proc/version: >> >> Linux version 2.6.32.7 (root@homemp3) (gcc version 4.3.2 (Debian >> 4.3.2-1.1) ) #1 Sat Feb 6 10:50:05 CET 2010 >> >> /proc/cpuinfo: >> >> processor : 0 >> vendor_id : GenuineIntel >> cpu family : 15 >> model : 4 >> model name : Intel(R) Celeron(R) CPU 2.80GHz >> stepping : 9 >> cpu MHz : 2799.930 >> cache size : 256 KB >> fdiv_bug : no >> hlt_bug : no >> f00f_bug : no >> coma_bug : no >> fpu : yes >> fpu_exception : yes >> cpuid level : 5 >> wp : yes >> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >> mca cmovpat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm >> constant_tsc pebs bts pni dtes64 monitor ds_cpl tm2 cid cx16 xtpr lahf_lm >> bogomips : 5623.13 >> clflush size : 64 >> cache_alignment : 128 >> address sizes : 36 bits physical, 48 bits virtual >> power management: >> >> >> Output of lcpsi -vvv: >> >> 00:00.0 Host bridge: VIA Technologies, Inc. PT880 Ultra/PT894 Host Bridge >> Subsystem: ASRock Incorporation Device 0308 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort+ >SERR- <PERR+ INTx- >> Latency: 8, Cache Line Size: 32 bytes >> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] >> Capabilities: [80] AGP version 3.5 >> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- >> HTrans- 64 >> bit- FW- AGP3- Rate=x1,x2,x4 >> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- >> FW- Rate=<n >> one> >> Capabilities: [50] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: agpgart-via >> >> 00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge >> Subsystem: ASRock Incorporation Device 1308 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> >> 00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge >> Subsystem: ASRock Incorporation Device 2308 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> >> 00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> >> 00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge >> Subsystem: ASRock Incorporation Device 4308 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> >> 00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller >> (prog-if >> 20 [IO(X)-APIC]) >> Subsystem: ASRock Incorporation Device 5308 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> >> 00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> >> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge >> (prog-if 00 [ >> Normal decode]) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 >> I/O behind bridge: 0000f000-00000fff >> Memory behind bridge: fc700000-fe7fffff >> Prefetchable memory behind bridge: cff00000-dfefffff >> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- <SERR- <PERR- >> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >> Capabilities: [70] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge >> Controller (p >> rog-if 00 [Normal decode]) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 >> I/O behind bridge: 00001000-00001fff >> Memory behind bridge: fe800000-fe8fffff >> Prefetchable memory behind bridge: 40000000-401fffff >> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- >> <MAbort- <SERR- <PERR- >> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 >> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >> <64ns, L1 >> unlimited >> ExtTag- RBE- FLReset- >> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >> Unsupporte >> d- >> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- >> MaxPayload 128 bytes, MaxReadReq 128 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- >> AuxPwr+ TransPe >> nd- >> LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, >> Latency L >> 0 <64ns, L1 <1us >> ClockPM- Suprise- LLActRep+ BwNot- >> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >> CommClk- >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- >> DLActive >> - BWMgmt- ABWMgmt- >> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- >> HotPlug+ Surpise >> + >> Slot # 10, PowerLimit 75.000000; Interlock- >> NoCompl- >> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >> HPIrq- L >> inkChg- >> Control: AttnInd Unknown, PwrInd Unknown, >> Power- Interlo >> ck- >> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- >> PresDet- Interl >> ock- >> Changed: MRL- PresDet- LinkState- >> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- >> PMEIntEna- CRSV >> isible- >> RootCap: CRSVisible- >> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >> Capabilities: [68] Power Management version 2 >> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA >> PME(D0+,D1-,D2-,D3hot >> +,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ >> Queue=0/0 >> Enable- >> Address: 0000000000000000 Data: 0000 >> Masking: 00000000 Pending: 00000000 >> Capabilities: [100] Advanced Error Reporting <?> >> Capabilities: [140] Virtual Channel <?> >> >> 00:09.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet >> Controll >> er (rev 05) >> Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32 (63750ns min), Cache Line Size: 32 bytes >> Interrupt: pin A routed to IRQ 10 >> Region 0: Memory at feba0000 (32-bit, non-prefetchable) >> [size=128K] Region 1: Memory at feb80000 (32-bit, non-prefetchable) >> [size=128K] Region 2: I/O ports at cc00 [size=64] >> Expansion ROM at feb60000 [disabled] [size=128K] >> Capabilities: [dc] Power Management version 2 >> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA >> PME(D0+,D1-,D2-,D3hot >> +,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=1 PME- >> Capabilities: [e4] PCI-X non-bridge device >> Command: DPERE- ERO+ RBC=512 OST=1 >> Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple >> DMMRBC=20 >> 48 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- >> Kernel driver in use: e1000 >> Kernel modules: e1000 >> >> 00:0a.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA >> 300 TX4 >> ) (rev 02) >> Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes >> Interrupt: pin A routed to IRQ 10 >> Region 0: I/O ports at d400 [size=128] >> Region 2: I/O ports at c800 [size=256] >> Region 3: Memory at febfe000 (32-bit, non-prefetchable) [size=4K] >> Region 4: Memory at febc0000 (32-bit, non-prefetchable) >> [size=128K] Expansion ROM at febe0000 [disabled] [size=32K] >> Capabilities: [60] Power Management version 2 >> Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: sata_promise >> >> 00:0c.0 Multimedia controller: Philips Semiconductors >> SAA7131/SAA7133/SAA7135 Vi >> deo Broadcast Decoder (rev d1) >> Subsystem: Avermedia Technologies Inc Device 2c05 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32 >> Interrupt: pin A routed to IRQ 11 >> Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=2K] >> Capabilities: [40] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: saa7134 >> Kernel modules: saa7134 >> >> 00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port >> Controller (re >> v 80) (prog-if 8f [Master SecP SecO PriP PriO]) >> Subsystem: ASRock Incorporation Device 0591 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32 >> Interrupt: pin B routed to IRQ 10 >> Region 0: I/O ports at e000 [size=8] >> Region 1: I/O ports at dc00 [size=4] >> Region 2: I/O ports at d880 [size=8] >> Region 3: I/O ports at d800 [size=4] >> Region 4: I/O ports at d480 [size=16] >> Region 5: I/O ports at d000 [size=256] >> Capabilities: [c0] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: sata_via >> >> 00:0f.1 IDE interface: VIA Technologies, Inc. >> VT82C586A/B/VT82C686/A/B/VT823x/A/ >> C PIPC Bus Master IDE (rev 07) (prog-if 8a [Master SecP PriP]) >> Subsystem: ASRock Incorporation K7VT2/K7VT6 motherboard >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32 >> Region 0: [virtual] Memory at 000001f0 (32-bit, >> non-prefetchable) [disab >> led] [size=8] >> Region 1: [virtual] Memory at 000003f0 (type 3, >> non-prefetchable) [disab >> led] [size=1] >> Region 2: [virtual] Memory at 00000170 (32-bit, >> non-prefetchable) [disab >> led] [size=8] >> Region 3: [virtual] Memory at 00000370 (type 3, >> non-prefetchable) [disab >> led] [size=1] >> Region 4: I/O ports at fc00 [size=16] >> Capabilities: [c0] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: VIA_IDE >> >> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 >> Controller >> (rev a0) (prog-if 00 [UHCI]) >> Subsystem: ASRock Incorporation K7VT6 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32, Cache Line Size: 32 bytes >> Interrupt: pin A routed to IRQ 11 >> Region 4: I/O ports at e080 [size=32] >> Capabilities: [80] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA >> PME(D0+,D1+,D2+,D3h >> ot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 >> Controller >> (rev a0) (prog-if 00 [UHCI]) >> Subsystem: ASRock Incorporation K7VT6 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32, Cache Line Size: 32 bytes >> Interrupt: pin B routed to IRQ 10 >> Region 4: I/O ports at e400 [size=32] >> Capabilities: [80] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA >> PME(D0+,D1+,D2+,D3h >> ot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 >> Controller >> (rev a0) (prog-if 00 [UHCI]) >> Subsystem: ASRock Incorporation K7VT6 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32, Cache Line Size: 32 bytes >> Interrupt: pin C routed to IRQ 10 >> Region 4: I/O ports at e480 [size=32] >> Capabilities: [80] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA >> PME(D0+,D1+,D2+,D3h >> ot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 >> Controller >> (rev a0) (prog-if 00 [UHCI]) >> Subsystem: ASRock Incorporation K7VT6 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32, Cache Line Size: 32 bytes >> Interrupt: pin D routed to IRQ 10 >> Region 4: I/O ports at ec00 [size=32] >> Capabilities: [80] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA >> PME(D0+,D1+,D2+,D3h >> ot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if >> 20 [EHC >> I]) >> Subsystem: ASRock Incorporation K7VT6 motherboard >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32, Cache Line Size: 128 bytes >> Interrupt: pin C routed to IRQ 10 >> Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=256] >> Capabilities: [80] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA >> PME(D0+,D1+,D2+,D3h >> ot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: ehci_hcd >> Kernel modules: ehci-hcd >> >> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge >> Subsystem: ASRock Incorporation Device 3337 >> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Capabilities: [c0] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller >> Subsystem: VIA Technologies, Inc. Device 337e >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort+ >SERR- <PERR+ INTx- >> Latency: 32 >> Capabilities: [58] HyperTransport: Interrupt Discovery and >> Configuration >> >> >> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] >> (rev 7c) >> Subsystem: ASRock Incorporation K7VT6 motherboard >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes >> Interrupt: pin A routed to IRQ 11 >> Region 0: I/O ports at e800 [size=256] >> Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256] >> Capabilities: [40] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >> PME(D0+,D1+,D2+,D3hot >> +,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: via-rhine >> Kernel modules: via-rhine >> >> 00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- >> <MAbort+ >SERR- <PERR- INTx- >> Latency: 0 >> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed+ >> >> 01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 >> MX200] ( >> rev b2) (prog-if 00 [VGA controller]) >> Subsystem: ABIT Computer Corp. Device 6107 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32 (1250ns min, 250ns max) >> Interrupt: pin A routed to IRQ 11 >> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] >> Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M] >> Expansion ROM at fe7f0000 [disabled] [size=64K] >> Capabilities: [60] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [44] AGP version 2.0 >> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- >> HTrans- 64 >> bit- FW+ AGP3- Rate=x1,x2,x4 >> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- >> FW- Rate=<n >> one> >> Kernel modules: nvidiafb >> >> 80:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA >> High De >> finition Audio Controller) (rev 10) >> Subsystem: ASRock Incorporation Device 0888 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> Interrupt: pin A routed to IRQ 10 >> Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K] >> Capabilities: [50] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA >> PME(D0+,D1-,D2-,D3ho >> t+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ >> Queue=0/0 >> Enable- >> Address: 0000000000000000 Data: 0000 >> Capabilities: [70] Express (v1) Root Complex Integrated >> Endpoint, MSI 00 >> >> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s >> <64ns, L1 >> <1us >> ExtTag- RBE- FLReset- >> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >> Unsupporte >> d- >> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- >> MaxPayload 128 bytes, MaxReadReq 128 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- >> AuxPwr+ TransPe >> nd+ >> LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, >> Latency >> L0 <64ns, L1 <1us >> ClockPM- Suprise- LLActRep- BwNot- >> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- >> DLActive >> - BWMgmt- ABWMgmt- >> Capabilities: [100] #1106 >> Kernel driver in use: HDA Intel >> Kernel modules: snd-hda-intel >> >> >> /proc/ioports: >> >> 0000-001f : dma1 >> 0020-0021 : pic1 >> 0040-0043 : timer0 >> 0050-0053 : timer1 >> 0060-0060 : keyboard >> 0064-0064 : keyboard >> 0070-0077 : rtc >> 0080-008f : dma page reg >> 00a0-00a1 : pic2 >> 00c0-00df : dma2 >> 00f0-00ff : fpu >> 0170-0177 : 0000:00:0f.1 >> 0170-0177 : via82cxxx >> 01f0-01f7 : 0000:00:0f.1 >> 01f0-01f7 : via82cxxx >> 0295-0296 : w83627hf >> 0295-0296 : pnp 00:09 >> 0295-0296 : w83627hf >> 02f8-02ff : serial >> 0376-0376 : 0000:00:0f.1 >> 0376-0376 : via82cxxx >> 03c0-03df : vga+ >> 03e0-03e7 : pnp 00:09 >> 03f2-03f2 : floppy >> 03f4-03f5 : floppy >> 03f6-03f6 : 0000:00:0f.1 >> 03f6-03f6 : via82cxxx >> 03f7-03f7 : floppy >> 03f8-03ff : serial >> 0400-041f : pnp 00:09 >> 04d0-04d1 : pnp 00:09 >> 0800-087f : pnp 00:09 >> 0800-0803 : ACPI PM1a_EVT_BLK >> 0804-0805 : ACPI PM1a_CNT_BLK >> 0808-080b : ACPI PM_TMR >> 0810-0815 : ACPI CPU throttle >> 0820-0823 : ACPI GPE0_BLK >> 0cf8-0cff : PCI conf1 >> 1000-1fff : PCI Bus 0000:02 >> c800-c8ff : 0000:00:0a.0 >> cc00-cc3f : 0000:00:09.0 >> cc00-cc3f : e1000 >> d000-d0ff : 0000:00:0f.0 >> d000-d0ff : sata_via >> d400-d47f : 0000:00:0a.0 >> d480-d48f : 0000:00:0f.0 >> d480-d48f : sata_via >> d800-d803 : 0000:00:0f.0 >> d800-d803 : sata_via >> d880-d887 : 0000:00:0f.0 >> d880-d887 : sata_via >> dc00-dc03 : 0000:00:0f.0 >> dc00-dc03 : sata_via >> e000-e007 : 0000:00:0f.0 >> e000-e007 : sata_via >> e080-e09f : 0000:00:10.0 >> e400-e41f : 0000:00:10.1 >> e480-e49f : 0000:00:10.2 >> e800-e8ff : 0000:00:12.0 >> e800-e8ff : via-rhine >> ec00-ec1f : 0000:00:10.3 >> fc00-fc0f : 0000:00:0f.1 >> fc00-fc0f : via82cxxx >> >> /proc/iomem: >> >> 00000000-0000ffff : reserved >> 00010000-0009fbff : System RAM >> 0009fc00-0009ffff : reserved >> 000a0000-000bffff : Video RAM area >> 000c0000-000cc7ff : Video ROM >> 000cc800-000d17ff : Adapter ROM >> 000d1800-000d27ff : Adapter ROM >> 000e6000-000fffff : reserved >> 000f0000-000fffff : System ROM >> 00100000-3ffaffff : System RAM >> 01000000-0128c677 : Kernel code >> 0128c678-0138f533 : Kernel data >> 013e0000-014131ff : Kernel bss >> 3ffb0000-3ffbffff : ACPI Tables >> 3ffc0000-3ffeffff : ACPI Non-volatile Storage >> 3fff0000-3fffffff : reserved >> 40000000-401fffff : PCI Bus 0000:02 >> cff00000-dfefffff : PCI Bus 0000:01 >> d0000000-d7ffffff : 0000:01:00.0 >> e0000000-efffffff : PCI MMCONFIG 0 [00-ff] >> e0000000-efffffff : pnp 00:0e >> f8000000-fbffffff : 0000:00:00.0 >> fc700000-fe7fffff : PCI Bus 0000:01 >> fd000000-fdffffff : 0000:01:00.0 >> fe7f0000-fe7fffff : 0000:01:00.0 >> fe800000-fe8fffff : PCI Bus 0000:02 >> fe9fc000-fe9fffff : 0000:80:01.0 >> fe9fc000-fe9fffff : pnp 00:09 >> fe9fc000-fe9fffff : ICH HD audio >> feb60000-feb7ffff : 0000:00:09.0 >> feb80000-feb9ffff : 0000:00:09.0 >> feb80000-feb9ffff : e1000 >> feba0000-febbffff : 0000:00:09.0 >> feba0000-febbffff : e1000 >> febc0000-febdffff : 0000:00:0a.0 >> febe0000-febe7fff : 0000:00:0a.0 >> febfe000-febfefff : 0000:00:0a.0 >> febfe000-febfefff : sata_promise >> febff000-febff7ff : 0000:00:0c.0 >> febff000-febff7ff : saa7133[0] >> febff800-febff8ff : 0000:00:10.4 >> febff800-febff8ff : ehci_hcd >> febffc00-febffcff : 0000:00:12.0 >> febffc00-febffcff : via-rhine >> fec00000-fec00fff : pnp 00:0a >> fee00000-fee00fff : reserved >> fee00000-fee00fff : pnp 00:0a >> ff780000-ffffffff : reserved >> ffb80000-ffbfffff : pnp 00:09 >> fff80000-ffffffff : pnp 00:0f >> >> /proc/scsi/scsi: >> >> Host: scsi0 Channel: 00 Id: 00 Lun: 00 >> Vendor: ATA Model: ST31500341AS Rev: CC1H >> Type: Direct-Access ANSI SCSI revision: 05 >> Host: scsi4 Channel: 00 Id: 00 Lun: 00 >> Vendor: ATA Model: ST3500630AS Rev: 3.AA >> Type: Direct-Access ANSI SCSI revision: 05 >> >> >> >> Thanks for any hints and best regards, >> -- Axel >> >
-- Find Security Certificate at http://www.axel-uhl.de/cgi-bin/cacert.cgi
[unhandled content-type:application/x-pkcs7-signature] | |