lkml.org 
[lkml]   [2010]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 8/9] PCI / ACPI / PM: Platform support for PCI PME wake-up (rev. 7)
    On Thu, Feb 11, 2010 at 01:56:54AM +0100, Rafael J. Wysocki wrote:
    > On Thursday 11 February 2010, Rafael J. Wysocki wrote:
    > > On Thursday 11 February 2010, Gary Hade wrote:
    > > > On Wed, Feb 10, 2010 at 11:58:00PM +0100, Rafael J. Wysocki wrote:
    > > > > On Wednesday 10 February 2010, Gary Hade wrote:
    > > ...
    > > > > > Yes, 6/9 also appeared to be the most likely suspect to me and
    > > > > > I was already doing what you asked except in the opposite order.
    > > > > > With 1/9 through 6/9 both the hot-add and hot-remove issues still
    > > > > > reproduced. After removing 6/9 both issues disappeared.
    > > > >
    > > > > Thanks for verifying, I've already started to look for bugs in it.
    > > >
    > > > Thanks!
    > > >
    > > > >
    > > > > What's your kernel command line, BTW?
    > > >
    > > > root=/dev/disk/by-id/scsi-35000c5000036ffcb-part7 ip=9.47.66.9:9.47.67.50:9.47.66.1:255.255.254.0 resume=/dev/disk/by-id/scsi-35000c50000370247-part3 crashkernel=256M-:128M console=tty0 console=ttyS0,115200 pci=use_crs pci=norom
    > >
    > > Thanks. We found a bug in the patch, but it would require you to use a
    > > specific command line switch to trigger, which you don't use.
    > >
    > > I'll let you know if I have anything to test.
    >
    > OK, please try the patch below on top of [1-6/9].

    Sorry, it didn't help. The hot-add and hot-remove behaviors
    still look the same.

    Gary

    --
    Gary Hade
    System x Enablement
    IBM Linux Technology Center
    503-578-4503 IBM T/L: 775-4503
    garyhade@us.ibm.com
    http://www.ibm.com/linux/ltc


    \
     
     \ /
      Last update: 2010-02-11 03:09    [W:2.377 / U:0.108 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site