Messages in this thread | | | Date | Thu, 30 Dec 2010 17:12:33 +0200 | From | Baruch Siach <> | Subject | Re: [uClinux-dev] Re: dm9000 patch |
| |
Hi Angelo,
On Thu, Dec 30, 2010 at 04:05:09PM +0100, Angelo Dureghello wrote: > Hi Greg and All, > infinite thanks, i solved finally my issue and the board is fully working. > > I used IRQ7 line, casually, and unfortunately it was wrong. > IRQ7 is a special autovectored interrupt, in particular, it is an > EDGE interrupt, and not a LEVEL interrupt like IRQ1 to 6. > > I used IRQ1 now, a normal level interrupt, and everything works perfect. > > So i have dm9000 and MCF5307 (big-endian cpu) fully working with 32 > bit bus straight wired D0:31 to the dm9000, and would like to share > my patch to dm9000.c, so maybe in next kernel versions dm9000 maybe > could be enabled as default. Let me know eventually the procedure > for this.
Just send the patch to the netdev mailing list. For additional instructions see Documentation/SubmitChecklist and Documentation/SubmittingPatches. Once you submitted you patch you can track the status of your patch at http://patchwork.ozlabs.org/project/netdev/list/.
baruch
-- ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
| |