lkml.org 
[lkml]   [2010]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: ftrace: trace_pipe_raw interface broken
On Mon, Dec 20, 2010 at 9:59 PM, David Sharp <dhsharp@google.com> wrote:
> On Mon, Dec 20, 2010 at 7:52 PM, Steven Rostedt <rostedt@goodmis.org> wrote:
>> Hi David,
>>
>> Thanks for the report.
>>
>> On Mon, 2010-12-20 at 18:43 -0800, David Sharp wrote:
>>> trace_pipe_raw doesn't work correctly, I think because
>>> tracing_buffers_read() uses ring_buffer_read_page() incorrectly.
>>>
>>> In particular, if you read less than one page at a time, then you get
>>> much more data than expected from the ring buffer:
>>>
>>> $ ftrace=/sys/kernel/debug/tracing
>>> $ echo 0 > $ftrace/tracing_enabled
>>> $ echo 1 > $ftrace/events/enable
>>> $ echo > $ftrace/trace  # reset
>>> $ echo 100 > $ftrace/buffer_size_kb
>>> $  # generate lots of events:
>>> $ echo 1 > $ftrace/tracing_enabled &&  ls -laR /proc/ > /dev/null 2>&1
>>> && echo 0 > $ftrace/tracing_enabled
>>> $ dd bs=1024 if=$ftrace/per_cpu/cpu0/trace_pipe_raw 2>/dev/null | wc -c
>>> 675840
>>>
>>> That's significantly more data than the buffer could possibly contain.
>>> Further shrinking bs increases the amount of data output even more.
>>
>> Yep that's a side effect. What happens is that we always read a "full
>> page" even if we do not read in page size chunks. If we read 100 bytes,
>> it will read a header, and all the events that fit inside that 100
>> bytes, and then return a full page with the header, the 100 bytes -
>> header size, and the rest of the page filled with zeros.
>>
>> Do a:
>>
>>        hexdump -C outputfile
>>
>> and you'll see a lot of "zeros". The reason for this is to keep all
>> reads in pagesize chunks. If you read only 100 bytes of data, I still
>> need to keep that page aligned in the output. The reason I do this is in
>> case there's two readers. I don't want one to read part of a page that
>> includes the header, and then the other reads the rest of the page. The
>> header tells you how much data is on that page.
>
> aha, I see. My assumption that the page headers weren't a needed part
> of the trace output was throwing off my analysis.
>
>> I guess I could have had the info->spare just read the full page, and
>> then other readers would just read the next page.
>
> I don't think multiple readers a use case we're concerned about, so
> either way as far as I'm concerned.
>
>>> Even when reading >=4096 bytes, something is funny:
>>>
>>> $ dd bs=4096 if=$ftrace/per_cpu/cpu0/trace_pipe_raw 2>/dev/null | wc -c
>>> 118784
>>>
>>> That's 116kB. I expect 100kb to allocate (102400+4087)/4088 = 26
>>> pages, or 104kb-worth of pages. 116kB is about 28 pages.
>>
>> Hmm, isn't page data 4080, not 4088, since it has 2, 8 byte items in it.
>> Timestamp and atomic (on 64bit). 4096 - 16 = 4080. But still the numbers
>> are not much different.
>
> oops, yeah. I rounded 2*8 = 8  ;)
>
>> Note, when I did it, I got:
>>
>> $ dd if=/debug/tracing/per_cpu/cpu0/trace_pipe_raw of=/tmp/dat bs=4096
>> 27+0 records in
>> 27+0 records out
>> 110592 bytes (111 kB) copied, 0.00302891 s, 36.5 MB/s
>>
>> $ cat /debug/tracing/buffer_size_kb
>> 100
>>
>> Ah, running hexdump -C, I got this at the end:
>>
>> 00019c80  62 57 00 00 22 d1 09 81  ff ff ff ff 76 d1 09 81  |bW.."Ñ..ÿÿÿÿvÑ..|
>> 00019c90  ff ff ff ff 00 00 00 00  00 00 00 00 00 00 00 00  |ÿÿÿÿ............|
>> 00019ca0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
>> *
>> 0001a000  d8 32 b6 7e ed 53 05 00  24 00 00 00 00 00 00 00  |Ø2¶~íS..$.......|
>> 0001a010  a8 36 00 00 01 00 00 00  ca 0b 00 00 ff ff ff ff  |š6......Ê...ÿÿÿÿ|
>> 0001a020  00 00 00 00 6a d1 09 81  ff ff ff ff 68 26 16 81  |....jÑ..ÿÿÿÿh&..|
>> 0001a030  ff ff ff ff 00 00 00 00  00 00 00 00 00 00 00 00  |ÿÿÿÿ............|
>> 0001a040  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
>> *
>> 0001b000
>>
>> I don't know why it added that last page. I'll have to look into this.
>
> Thanks for taking a look!
>
> I'm actually seeing up to 3 extra pages (29 records) frequently,
> although it varies. I even just got 30 pages.
>
> aha, check this out though, looking at all the page headers:
>
> $ hexdump -C /tmp/trace_raw | grep '^[0-9a-f]*000 '
> 00000000  7d 9a 19 9a fd 01 00 00  74 0d 00 00 00 00 00 00  |}...�...t.......|
> 00001000  12 22 4a 71 01 02 00 00  38 00 00 00 00 00 00 00  |."Jq....8.......|
> 00002000  62 99 60 d7 01 02 00 00  b8 0f 00 c0 ff ff ff ff  |b.`�....�..�����|
> # negative commit count? or, notice this is the third page.
> # Maybe there's garbage at the beginning, rather than the end.
> 00003000  e4 cb e2 dc 01 02 00 00  f0 0f 00 00 00 00 00 00  |����....�.......|
> # <snip>
> 00019000  7a 79 01 ef 01 02 00 00  dc 0f 00 00 00 00 00 00  |zy.�....�.......|
> 0001a000  c7 51 05 ef 01 02 00 00  c0 0f 00 00 00 00 00 00  |�Q.�....�.......|
> 0001b000  af fe 1b ef 01 02 00 00  34 08 00 00 00 00 00 00  |��.�....4.......|
> 0001c000  49 f3 1f ef 01 02 00 00  2c 00 00 00 00 00 00 00  |I�.�....,.......|
>
> Interestingly, they all have valid-looking timestamps (in that they
> are monotonic), even before the negative commit count.
>
> Here's the one where I got 30 pages:
>
> 00000000  1d f5 1f ef 01 02 00 00  68 07 00 00 00 00 00 00  |.�.�....h.......|
> 00000770  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
> *
> 00001000  bf 04 59 1f 4a 02 00 00  28 00 00 00 00 00 00 00  |�.Y.J...(.......|
> 00001030  00 00 00 00 ff ff ff ff  00 00 00 00 00 00 00 00  |....����........|
> 00001040  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
> *
> 00002000  6b 0b 59 1f 4a 02 00 00  28 00 00 00 00 00 00 00  |k.Y.J...(.......|
> 00002030  ff ff ff ff 1d 00 00 00  00 00 00 00 00 00 00 00  |����............|
> 00002040  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
> *
> 00003000  df b5 6d 68 4a 02 00 00  d4 0f 00 c0 ff ff ff ff  |ߵmhJ...�..�����|
> # negative commit count in the 4th page this time. I see a pattern here...
> # also, lots of zeroes in the first 3 pages.
> 00004000  94 9b be 6c 4a 02 00 00  d4 0f 00 00 00 00 00 00  |..�lJ...�.......|
> # <snip>
> 00019000  88 69 4f 91 4a 02 00 00  cc 0f 00 00 00 00 00 00  |.iO.J...�.......|
> 0001a000  6f 4d ab 97 4a 02 00 00  e4 0f 00 00 00 00 00 00  |oM�.J...�.......|
> 0001b000  4c 98 2d 9e 4a 02 00 00  d4 0f 00 00 00 00 00 00  |L.-.J...�.......|
> 0001c000  f0 92 57 a3 4a 02 00 00  6c 0e 00 00 00 00 00 00  |�.W�J...l.......|
> 0001d000  6e f9 24 a4 4a 02 00 00  2c 00 00 00 00 00 00 00  |n�$�J...,.......|
>
> I don't know what this means yet. Is a negative commit count ever
> expected? ring_buffer_read_page does add 1<<30 and 1<<31 when there
> are events missing, but I don't think that would result in these bit
> patterns.
>
> That's enough for today. I'll investigate more tomorrow.

I did a test that yielded some interesting insights:

$ # write the current time to trace_mark continuously from cpu0:
$ taskset -c 0 sh -c 'while true ; do echo "time: $(date +%s.%N)" \
> /sys/kernel/debug/tracing/trace_marker ; done' &
$ # Let the buffer fill, and note the start and end times:
$ echo "start: $(date +%s.%N)" ; echo 1 > $ftrace/tracing_enabled ; sleep 12 ; \
echo 0 > $ftrace/tracing_enabled ; echo "end: $(date +%s.%N)"
start: 1293051826.630452621
end: 1293051838.634052658
$ # gather result
$ dd bs=4096 if=$ftrace/per_cpu/cpu0/trace_pipe_raw of=/tmp/trace_raw
30+0 records in
30+0 records out
122880 bytes (123 kB) copied, 0.000300114 s, 409 MB/s

Okay, 30 pages. 4 too many, but I've seen that before.

Now, the data. Page 1:

00000000 61 17 63 55 ab 82 00 00 ac 0f 00 00 00 00 00 00 |a.cU�...�.......|
00000010 1e 6c b4 f7 04 01 00 00 0c 00 00 00 05 00 00 00 |.l��............|
00000020 66 44 00 00 ff ff ff ff 00 00 00 00 00 00 00 00 |fD..����........|
00000030 74 69 6d 65 3a 20 31 32 39 33 30 35 31 38 32 36 |time: 1293051826|
00000040 2e 36 33 31 32 34 31 31 36 39 0a 00 0c 00 00 00 |.631241169......|

okay, a small time lag (789 microsec) before the trace starts. (If
you're asking why you're seeing the beginning of the trace and how
there could have been no overflow, you're in the advanced class. I
didn't realize this until Page 4...)

btw, the trace_marks are occurring on the order of 1ms apart.

Page 1 ends at 0fbc, which fits the 0fac value for "commit" in the page header.

Now, the whole of Page 2:

00001000 70 25 e0 81 b3 82 00 00 34 00 00 00 00 00 00 00 |p%�.�...4.......|
00001010 6c df ff 01 05 00 00 00 66 44 00 00 ff ff ff ff |l��.....fD..����|
00001020 00 00 00 00 00 00 00 00 74 69 6d 65 3a 20 31 32 |........time: 12|
00001030 39 33 30 35 31 38 32 36 2e 37 31 32 31 31 34 34 |93051826.7121144|
00001040 36 30 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 |60..............|

Only a single event, nothing remarkable about it other than that it is
on a separate page

Page 3 has only a padding event in it:

00002000 6b 24 f0 81 b3 82 00 00 10 00 00 00 00 00 00 00 |k$�.�...........|
00002010 3d 00 00 00 0c 00 00 00 00 00 00 00 00 00 00 00 |=...............|

So 0x0fac + 0x34 + 0x10 = 0xff0, plus 16 bytes of header makes one
page. So, it seems that was the real first page of the ring buffer.
The question is, why did it get split up?

Here's where it gets more interesting. Here's Page 4:

00003000 25 56 1a cb b5 82 00 00 d8 0f 00 c0 ff ff ff ff |%V.˵...�..�����|
00003010 0c 00 00 00 05 00 00 00 66 44 00 00 ff ff ff ff |........fD..����|
00003020 00 00 00 00 00 00 00 00 74 69 6d 65 3a 20 31 32 |........time: 12|
00003030 39 33 30 35 31 38 33 36 2e 35 34 34 36 31 30 31 |93051836.5446101|
00003040 37 39 0a 00 8c c7 0f 02 05 00 00 00 66 44 00 00 |79...�......fD..|

Remember the last event on page 2 was at 1293051826.712114460. There
are 10 seconds missing!

Also, still seeing that strange value for "commit" (0xffffffff0c000fd8).

Between the first event on Page4 and the last event, the events seem
to be contiguous, very roughly 1msec apart.

The last event of the trace is the only event on the last page:

0001d000 50 dc 41 47 b6 82 00 00 34 00 00 00 00 00 00 00 |P�AG�...4.......|
0001d010 2c b7 1a 02 05 00 00 00 66 44 00 00 ff ff ff ff |,�......fD..����|
0001d020 00 00 00 00 00 00 00 00 74 69 6d 65 3a 20 31 32 |........time: 12|
0001d030 39 33 30 35 31 38 33 38 2e 36 33 31 38 37 38 37 |93051838.6318787|
0001d040 39 34 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 |94..............|

That's at 1293051838.631878794, compared to the recorded "end" time
1293051838.634052658 (diff is 2,173 microsec). So, that very likely is
the real end of the trace.

This leads to a theory that this has something to do with overflow:

$ cat per_cpu/cpu0/stats
entries: 0
overrun: 16770
commit overrun: 0

16770 events where each event is on the order of 1msec apart roughly
accounts for 10 seconds of missing time.

So, it seems that the ring buffer started out writing to what
eventually became the initial reader page. But then as overflow
occurs, that page does not get overwritten.

There are three outstanding questions in my mind:
1) Why are we seeing the "first" page, which either should have been
overwritten, or should not be seen at all?
2) As before: Why the strange "commit" value in the page header for
the first contiguous-event page (Page 4)?
3) Why is that first page getting split up?

I think I have an idea about (3):

in ring_buffer_read_page(), there are three conditions for reading out
a page on event at a time. One of them is "reader_page ==
commit_page". That seems plausible for a full ring buffer, but I
haven't fully groked that.

But, within that path, it seems it should still copy out the whole
page. But, the loop condition for copying events is "while (len >
size)" where len is the remaining available size in the
caller-supplied page, and size is the size of the next event in the
ring buffer. So, that's off-by-one. if len == size, then there's just
enough space.

Does this fit? 0x1000 - 0xfbc = 68 bytes for len, but the event in
Page 2 is 52 bytes... So no. hmm, another question.

But, size is set to "rb_event_ts_length(event)", to ensure space for
time extend events to be paired with the event after it. Then in the
next loop, "size" bytes are memcpy'd to the caller-supplied page.
HOWEVER, the reader is then advanced with rb_advance_reader(), which
*does not* advance twice for time-extend events. So, the memcpy will
have copied two events, and "pos" is advanced by "size", and "len" is
decremented by "size", but then the reader is advanced by *only* one
event! This means that time-extend events should be followed by
duplicate events. Sure enough, the first event on the Page 1 is a time
extend, and it is followed by two identical events (I only show the
first word of the duplicate above, though).

A patch for these two problems is incoming.

Sorry for these long messages. If this is too much detail, I can scale it back.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-12-23 00:27    [W:0.063 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site