lkml.org 
[lkml]   [2010]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH] OMAP2: Devkit8000: Use _cansleep GPIO functions for display reset lines
From
The display reset lines are connected to a TPS65930 which may sleep
when changing GPIO values. Use the appropriate function to silence
a nasty warning from gpiolib.

Signed-off-by: Daniel Morsing <daniel.morsing@gmail.com>
---
arch/arm/mach-omap2/board-devkit8000.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/board-devkit8000.c
b/arch/arm/mach-omap2/board-devkit8000.c
index 53ac762..f1f58f5 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -118,27 +118,27 @@ static int devkit8000_panel_enable_lcd(struct
omap_dss_device *dssdev)
twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);

if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value(dssdev->reset_gpio, 1);
+ gpio_set_value_cansleep(dssdev->reset_gpio, 1);
return 0;
}

static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value(dssdev->reset_gpio, 0);
+ gpio_set_value_cansleep(dssdev->reset_gpio, 0);
}

static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value(dssdev->reset_gpio, 1);
+ gpio_set_value_cansleep(dssdev->reset_gpio, 1);
return 0;
}

static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value(dssdev->reset_gpio, 0);
+ gpio_set_value_cansleep(dssdev->reset_gpio, 0);
}

static struct regulator_consumer_supply devkit8000_vmmc1_supply =
--
1.7.3.3

\
 
 \ /
  Last update: 2010-12-21 08:51    [from the cache]
©2003-2011 Jasper Spaans