[lkml]   [2010]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    Patch in this message
    Subject[PATCH 3/3] hvc_dcc: Simplify assembly for v6 and v7 ARM
    The inline assembly differences for v6 vs. v7 in the hvc_dcc
    driver are purely optimizations. On a v7 processor, an mrc with
    the pc sets the condition codes to the 28-31 bits of the register
    being read. It just so happens that the TX/RX full bits the DCC
    driver is testing for are high enough in the register to be put
    into the condition codes. On a v6 processor, this "feature" isn't
    implemented and thus we have to do the usual read, mask, test
    operations to check for TX/RX full.

    Since we already test the RX/TX full bits before calling
    __dcc_getchar() and __dcc_putchar() we don't actually need to do
    anything special for v7 over v6. The only difference is in
    hvc_dcc_get_chars(). We would test RX full, poll RX full, and
    then read a character from the buffer, whereas now we will test
    RX full, read a character from the buffer, and then test RX full
    again for the second iteration of the loop. It doesn't seem
    possible for the buffer to go from full to empty between testing
    the RX full and reading a character. Therefore, replace the v7
    versions with the v6 versions and everything works the same.

    Cc: Tony Lindgren <>
    Cc: Arnd Bergmann <>
    Cc: Nicolas Pitre <>
    Cc: Daniel Walker <>
    Signed-off-by: Stephen Boyd <>
    drivers/char/hvc_dcc.c | 24 ------------------------
    1 files changed, 0 insertions(+), 24 deletions(-)

    diff --git a/drivers/char/hvc_dcc.c b/drivers/char/hvc_dcc.c
    index ad23cc8..435f6fa 100644
    --- a/drivers/char/hvc_dcc.c
    +++ b/drivers/char/hvc_dcc.c
    @@ -40,19 +40,6 @@ static inline u32 __dcc_getstatus(void)

    -#if defined(CONFIG_CPU_V7)
    -static inline char __dcc_getchar(void)
    - char __c;
    - asm volatile("get_wait: mrc p14, 0, pc, c0, c1, 0 \n\
    - bne get_wait \n\
    - mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
    - : "=r" (__c) : : "cc");
    - return __c;
    static inline char __dcc_getchar(void)
    char __c;
    @@ -62,24 +49,13 @@ static inline char __dcc_getchar(void)

    return __c;

    -#if defined(CONFIG_CPU_V7)
    -static inline void __dcc_putchar(char c)
    - asm volatile("put_wait: mrc p14, 0, pc, c0, c1, 0 \n\
    - bcs put_wait \n\
    - mcr p14, 0, %0, c0, c5, 0 "
    - : : "r" (c) : "cc");
    static inline void __dcc_putchar(char c)
    asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char"
    : /* no output register */
    : "r" (c));

    static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
    Sent by an employee of the Qualcomm Innovation Center, Inc.
    The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

     \ /
      Last update: 2010-12-20 21:11    [W:0.034 / U:4.740 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site