lkml.org 
[lkml]   [2010]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] Staging: rt2860: include KERN_* in printk
On Mon, Dec 13, 2010 at 10:30:32AM -0800, Greg KH wrote:
> On Mon, Dec 13, 2010 at 12:58:44AM +0100, L. Alberto Giménez wrote:
> > Fix checkpatch complains.
> >
> > The change of the DBGPRINT_ERR macro causes the change on the callers.
>
> What change?

-#define DBGPRINT_ERR(Fmt) \
-{ \
- printk("ERROR! "); \
- printk Fmt; \
-}
+#define DBGPRINT_ERR(fmt, args...) printk(KERN_ERR fmt, ##args)

Recommended by Joe. I agree that it is cleaner and more compliant.
That macro needed that the callers use two parens, as in:

DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));

With the introduced change, all calls to the DBGPRINT_ERR macro must be
translated to a regular single-parenthesized.

DBGPRINT_ERR("NICInitializeAdapter failed, Status[=0x%08x]\n", Status);

Yes, it's crap code, but I own an eeepc 901 and this was the perfect excuse to
get my harnds dirty :)

>
> >
> > Signed-off-by: L. Alberto Giménez <agimenez@sysvalve.es>
> > ---
> > drivers/staging/rt2860/chip/rtmp_phy.h | 14 ++++++------
> > drivers/staging/rt2860/common/ba_action.c | 6 ++--
> > drivers/staging/rt2860/common/cmm_data.c | 2 +-
> > drivers/staging/rt2860/common/cmm_mac_pci.c | 10 ++++----
> > drivers/staging/rt2860/common/cmm_mac_usb.c | 2 +-
> > drivers/staging/rt2860/common/cmm_wpa.c | 22 +++++++-----------
> > drivers/staging/rt2860/common/ee_efuse.c | 15 +++++++++---
> > drivers/staging/rt2860/common/mlme.c | 13 +++++------
> > drivers/staging/rt2860/common/rt_rf.c | 3 +-
> > drivers/staging/rt2860/common/rtmp_init.c | 24 ++++++++-----------
> > drivers/staging/rt2860/common/rtmp_mcu.c | 4 +-
> > drivers/staging/rt2860/common/spectrum.c | 2 +-
> > drivers/staging/rt2860/pci_main_dev.c | 2 +-
> > drivers/staging/rt2860/rt_linux.c | 21 ++++++++---------
> > drivers/staging/rt2860/rt_linux.h | 6 +----
> > drivers/staging/rt2860/rt_main_dev.c | 2 +-
> > drivers/staging/rt2860/rt_usb.c | 32 +++++++++++++-------------
> > drivers/staging/rt2860/sta/assoc.c | 2 +-
> > drivers/staging/rt2860/sta/auth.c | 3 +-
> > drivers/staging/rt2860/sta/connect.c | 3 +-
> > drivers/staging/rt2860/sta/rtmp_data.c | 2 +-
> > drivers/staging/rt2860/sta/sync.c | 6 ++--
> > drivers/staging/rt2860/usb_main_dev.c | 12 +++++-----
> > 23 files changed, 99 insertions(+), 109 deletions(-)
>
> That's a lot of different changes all in one patch. Care to break it up
> into a few different patches so it makes more sense?

I can break it up, but it made sense to me to group all KERN_* changes. That
included the DBGPRINT_ERR fix, that caused *a lot* of files to be changed as
well (to fix the macro call too).

Anyway, if you want me to split it up, please confirm :)

Regards,
--
L. Alberto Giménez
JabberID agimenez@jabber.sysvalve.es
GnuPG key ID 0x3BAABDE1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-12-13 21:27    [W:0.040 / U:1.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site