lkml.org 
[lkml]   [2010]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] IIO: dds.h convenience macros
Date
From: Michael Hennerich <michael.hennerich@analog.com>

Changes since RFC/v1:
IIO: Apply list review feedback

Apply list review feedback:
Rename attributes to fit IIO convention used in other drivers.
Provide ddsX_out_enable as opposed to ddsX_out_disable.
Fix typos.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
---
drivers/staging/iio/dds/dds.h | 152 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 152 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/iio/dds/dds.h

diff --git a/drivers/staging/iio/dds/dds.h b/drivers/staging/iio/dds/dds.h
new file mode 100644
index 0000000..a8dd7be
--- /dev/null
+++ b/drivers/staging/iio/dds/dds.h
@@ -0,0 +1,152 @@
+/*
+ * dds.h - sysfs attributes associated with DDS devices
+ *
+ * Copyright (c) 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/**
+ * /sys/bus/iio/devices/device[n]/ddsX_freqY
+ * Description:
+ * Stores frequency into tuning word register Y.
+ * There can be more than one ddsX_freqY file, which allows for pin controlled
+ * FSK Frequency Shift Keying (ddsX_pincontrol_freq_en is active) or the user
+ * can control the desired active tuning word by writing Y to the
+ * ddsX_freqsymbol file.
+ */
+
+#define IIO_DEV_ATTR_FREQ(_device, _num, _store, _addr) \
+ IIO_DEVICE_ATTR(dds##_device##_freq##_num, S_IWUSR, NULL, _store, _addr)
+
+/**
+ * /sys/bus/iio/devices/device[n]/ddsX_freqY_scale
+ * Description:
+ * Scale to be applied to ddsX_freqY in order to obtain the
+ * desired value in Hz. If shared across all frequency registers
+ * Y is not present.
+ */
+
+#define IIO_CONST_ATTR_FREQ_SCALE(_device, _string) \
+ IIO_CONST_ATTR(dds##_device##_freq_scale, _string)
+
+/**
+ * /sys/bus/iio/devices/device[n]/ddsX_freqsymbol
+ * Description:
+ * Specifies the active output frequency tuning word. The value corresponds
+ * to the Y in ddsX_freqY. To exit this mode the user can write
+ * ddsX_pincontrol_freq_en or ddsX_out_disable file.
+ */
+
+#define IIO_DEV_ATTR_FREQSYMBOL(_device, _store, _addr) \
+ IIO_DEVICE_ATTR(dds##_device##_freqsymbol, \
+ S_IWUSR, NULL, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/device[n]/ddsX_phaseY
+ * Description:
+ * Stores phase into phase register Y.
+ * There can be more than one ddsX_phaseY file, which allows for pin controlled
+ * PSK Phase Shift Keying (ddsX_pincontrol_phase_en is active) or the user can
+ * control the desired phase Y which is added to the phase accumulator output
+ * by writing Y to the en_phase file.
+ */
+
+#define IIO_DEV_ATTR_PHASE(_device, _num, _store, _addr) \
+ IIO_DEVICE_ATTR(dds##_device##_phase##_num, \
+ S_IWUSR, NULL, _store, _addr)
+
+/**
+ * /sys/bus/iio/devices/device[n]/ddsX_phaseY_scale
+ * Description:
+ * Scale to be applied to ddsX_phaseY in order to obtain the
+ * desired value in rad. If shared across all phase registers
+ * Y is not present.
+ */
+
+#define IIO_CONST_ATTR_PHASE_SCALE(_device, _string) \
+ IIO_CONST_ATTR(dds##_device##_phase_scale, _string)
+
+/**
+ * /sys/bus/iio/devices/device[n]/ddsX_phasesymbol
+ * Description:
+ * Specifies the active phase Y which is added to the phase accumulator output.
+ * The value corresponds to the Y in ddsX_phaseY. To exit this mode the user
+ * can write ddsX_pincontrol_phase_en or disable file.
+ */
+
+#define IIO_DEV_ATTR_PHASESYMBOL(_device, _store, _addr) \
+ IIO_DEVICE_ATTR(dds##_device##_phasesymbol, \
+ S_IWUSR, NULL, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/device[n]/ddsX_pincontrol_en
+ * Description:
+ * Both, the active frequency and phase is controlled by the respective
+ * phase and frequency control inputs.
+ */
+
+#define IIO_DEV_ATTR_PINCONTROL_EN(_device, _store, _addr) \
+ IIO_DEVICE_ATTR(dds##_device##_pincontrol_en, \
+ S_IWUSR, NULL, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/device[n]/ddsX_pincontrol_freq_en
+ * Description:
+ * The active frequency is controlled by the respective
+ * frequency control/select inputs.
+ */
+
+#define IIO_DEV_ATTR_PINCONTROL_FREQ_EN(_device, _store, _addr) \
+ IIO_DEVICE_ATTR(dds##_device##_pincontrol_freq_en, \
+ S_IWUSR, NULL, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/device[n]/ddsX_pincontrol_phase_en
+ * Description:
+ * The active phase is controlled by the respective
+ * phase control/select inputs.
+ */
+
+#define IIO_DEV_ATTR_PINCONTROL_PHASE_EN(_device, _store, _addr) \
+ IIO_DEVICE_ATTR(dds##_device##_pincontrol_phase_en, \
+ S_IWUSR, NULL, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/device[n]/ddsX_out_enable
+ * Description:
+ * Disables any signal generation on all outputs.
+ */
+
+#define IIO_DEV_ATTR_OUT_ENABLE(_device, _store, _addr) \
+ IIO_DEVICE_ATTR(dds##_device##_out_enable, \
+ S_IWUSR, NULL, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/device[n]/ddsX_outY_enable
+ * Description:
+ * Disables any signal generation on output Y.
+ */
+
+#define IIO_DEV_ATTR_OUTY_ENABLE(_device, _output, _store, _addr) \
+ IIO_DEVICE_ATTR(dds##_device##_out##_output##_enable, \
+ S_IWUSR, NULL, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/device[n]/ddsX_outY_wavetype
+ * Description:
+ * Specifies the output waveform. (sine, triangle, ramp, square, ...)
+ * For a list of available output waveform options read available_output_modes.
+ */
+#define IIO_DEV_ATTR_OUT_WAVETYPE(_device, _output, _store, _addr) \
+ IIO_DEVICE_ATTR(dds##_device##_out##_output##_wavetype, \
+ S_IWUSR, NULL, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/device[n]/ddsX_outY_wavetype_available
+ * Description:
+ * Lists all available output waveform options.
+ */
+#define IIO_CONST_ATTR_OUT_WAVETYPES_AVAILABLE(_device, _output, _modes)\
+ IIO_CONST_ATTR(dds##_device##_out##_output##_wavetype_available,\
+ _modes);
--
1.6.0.2


\
 
 \ /
  Last update: 2010-12-13 17:37    [W:0.089 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site