lkml.org 
[lkml]   [2010]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] soc_camera: Add the ability to bind regulators to soc_camedra devices
On Tue, 30 Nov 2010, Alberto Panizzo wrote:

> In certain machines, camera devices are supplied directly
> by a number of regulators. This patch add the ability to drive
> these regulators directly by the soc_camera driver.
>
> Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
> ---
>
> v2 changes:
> It is used the more standard regulator_bulk API, thanks to
> Mark Brown for pointing this.
>
> drivers/media/video/soc_camera.c | 73 +++++++++++++++++++++++++++-----------
> include/media/soc_camera.h | 5 +++
> 2 files changed, 57 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
> index 43848a7..f1c2094 100644
> --- a/drivers/media/video/soc_camera.c
> +++ b/drivers/media/video/soc_camera.c

Have to

#include <linux/regulator/consumer.h>

here

> @@ -43,6 +43,41 @@ static LIST_HEAD(hosts);
> static LIST_HEAD(devices);
> static DEFINE_MUTEX(list_lock); /* Protects the list of hosts */
>
> +static int soc_camera_power_set(struct soc_camera_device *icd,
> + struct soc_camera_link *icl,
> + int power_on)
> +{
> + int ret = 0;

"= 0" unneeded.

> +
> + if (power_on) {
> + ret = regulator_bulk_enable(icl->num_regulators,
> + icl->regulators);
> + } else {
> + ret = regulator_bulk_disable(icl->num_regulators,
> + icl->regulators);
> + }

superfluous braces

> + if (ret < 0) {
> + dev_err(icd->pdev, "Cannot %s regulators",
> + power_on ? "ENABLE" : "DISABLE");

why capitals?

> + goto err;

just return ret

> + }
> +
> + if (icl->power) {
> + ret = icl->power(icd->pdev, power_on);
> + if (ret < 0) {
> + dev_err(icd->pdev,
> + "Platform failed to power %s the camera.\n",
> + power_on ? "ON" : "OFF");

why capitals?

> + goto err;

just return ret, although, if switching on failed, and the platform us
also using regulators, don't you want to turn them off? Still I would do
this here inline without a goto, but that's already a matter of taste, so,
if you prefer, in this case a goto would be justified.

> + }
> + }
> +
> + return 0;
> +
> +err:
> + return ret;

with the above, this might go.

> +}
> +
> const struct soc_camera_format_xlate *soc_camera_xlate_by_fourcc(
> struct soc_camera_device *icd, unsigned int fourcc)
> {
> @@ -375,11 +410,9 @@ static int soc_camera_open(struct file *file)
> },
> };
>
> - if (icl->power) {
> - ret = icl->power(icd->pdev, 1);
> - if (ret < 0)
> - goto epower;
> - }
> + ret = soc_camera_power_set(icd, icl, 1);
> + if (ret < 0)
> + goto epower;
>
> /* The camera could have been already on, try to reset */
> if (icl->reset)
> @@ -425,8 +458,7 @@ esfmt:
> eresume:
> ici->ops->remove(icd);
> eiciadd:
> - if (icl->power)
> - icl->power(icd->pdev, 0);
> + soc_camera_power_set(icd, icl, 0);
> epower:
> icd->use_count--;
> mutex_unlock(&icd->video_lock);
> @@ -450,8 +482,7 @@ static int soc_camera_close(struct file *file)
>
> ici->ops->remove(icd);
>
> - if (icl->power)
> - icl->power(icd->pdev, 0);
> + soc_camera_power_set(icd, icl, 0);
> }
>
> if (icd->streamer == file)
> @@ -941,14 +972,14 @@ static int soc_camera_probe(struct device *dev)
>
> dev_info(dev, "Probing %s\n", dev_name(dev));
>
> - if (icl->power) {
> - ret = icl->power(icd->pdev, 1);
> - if (ret < 0) {
> - dev_err(dev,
> - "Platform failed to power-on the camera.\n");
> - goto epower;
> - }
> - }
> + ret = regulator_bulk_get(icd->pdev, icl->num_regulators,
> + icl->regulators);
> + if (ret)

"if (ret < 0)" for consistency, please

> + goto epower;
> +
> + ret = soc_camera_power_set(icd, icl, 1);
> + if (ret < 0)
> + goto epower;

You need a new label for this error - you also have to free regulators, if
this fails.

>
> /* The camera could have been already on, try to reset */
> if (icl->reset)
> @@ -1021,8 +1052,7 @@ static int soc_camera_probe(struct device *dev)
>
> ici->ops->remove(icd);
>
> - if (icl->power)
> - icl->power(icd->pdev, 0);
> + soc_camera_power_set(icd, icl, 0);
>
> mutex_unlock(&icd->video_lock);
>
> @@ -1044,8 +1074,7 @@ eadddev:
> evdc:
> ici->ops->remove(icd);
> eadd:
> - if (icl->power)
> - icl->power(icd->pdev, 0);
> + soc_camera_power_set(icd, icl, 0);
> epower:
> return ret;
> }
> @@ -1081,6 +1110,8 @@ static int soc_camera_remove(struct device *dev)
> }
> soc_camera_free_user_formats(icd);
>
> + regulator_bulk_free(icl->num_regulators, icl->regulators);
> +
> return 0;
> }
>
> diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
> index 86e3631..3e6b903 100644
> --- a/include/media/soc_camera.h
> +++ b/include/media/soc_camera.h
> @@ -15,6 +15,7 @@
> #include <linux/device.h>
> #include <linux/mutex.h>
> #include <linux/pm.h>
> +#include <linux/regulator/consumer.h>

No need to include the header here, just declare

struct regulator_bulk_data;

> #include <linux/videodev2.h>
> #include <media/videobuf-core.h>
> #include <media/v4l2-device.h>
> @@ -108,6 +109,10 @@ struct soc_camera_link {
> const char *module_name;
> void *priv;
>
> + /* Optional regulators that have to be managed on power on/off events */
> + struct regulator_bulk_data *regulators;
> + int num_regulators;
> +
> /*
> * For non-I2C devices platform platform has to provide methods to
> * add a device to the system and to remove
> --
> 1.6.3.3

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/


\
 
 \ /
  Last update: 2010-12-01 18:29    [W:0.053 / U:0.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site