Messages in this thread | | | Subject | Re: [REGRESSION] [2.6.37-rc1] Fan noise after suspend to ram/disk | From | Zhang Rui <> | Date | Mon, 08 Nov 2010 14:58:52 +0800 |
| |
IMO, the only one that may cause this regression is commit c57b62f5b1e6dd69ff8c96f6db7f86ea31c0e21f some app may enable polling via procfs and update the thermal zone status.
could you please attach the output of "grep . /proc/acpi/thermal/*/*" in 2.6.36 kernel?
thanks, rui
On Sat, 2010-11-06 at 03:49 +0800, Maciej Rutecki wrote: > On piątek, 5 listopada 2010 o 01:27:34 Zhang Rui wrote: > > On Fri, 2010-11-05 at 00:06 +0800, Maciej Rutecki wrote: > > > 1. > > > Last known good kernel: 2.6.36 > > > Bad kernel: 2.6.37-rc1 > > > =============================== > > > > > > 2. Problem: > > > When I resume computer from s2ram/s2disk and current CPU temp is below > > > lowest trip point, and -- from unknown reason -- fan start in maximum > > > speed it doesn't turn off (it should). > > > > could you please attach the output of "grep . /sys/class/thermal/*/*" > > when this happens? > > > > Thanks for the answer. > > maciek@gumis:~$ grep . /sys/class/thermal/*/* > /sys/class/thermal/cooling_device0/cur_state:0 > /sys/class/thermal/cooling_device0/max_state:10 > /sys/class/thermal/cooling_device0/type:LCD > /sys/class/thermal/cooling_device1/cur_state:0 > /sys/class/thermal/cooling_device1/max_state:10 > /sys/class/thermal/cooling_device1/type:Processor > /sys/class/thermal/cooling_device2/cur_state:0 > /sys/class/thermal/cooling_device2/max_state:10 > /sys/class/thermal/cooling_device2/type:Processor > /sys/class/thermal/cooling_device3/cur_state:1 > /sys/class/thermal/cooling_device3/max_state:1 > /sys/class/thermal/cooling_device3/type:Fan > /sys/class/thermal/cooling_device4/cur_state:1 > /sys/class/thermal/cooling_device4/max_state:1 > /sys/class/thermal/cooling_device4/type:Fan > /sys/class/thermal/cooling_device5/cur_state:1 > /sys/class/thermal/cooling_device5/max_state:1 > /sys/class/thermal/cooling_device5/type:Fan > /sys/class/thermal/cooling_device6/cur_state:1 > /sys/class/thermal/cooling_device6/max_state:1 > /sys/class/thermal/cooling_device6/type:Fan > /sys/class/thermal/thermal_zone0/cdev0_trip_point:1 > /sys/class/thermal/thermal_zone0/cdev1_trip_point:2 > /sys/class/thermal/thermal_zone0/cdev2_trip_point:3 > /sys/class/thermal/thermal_zone0/cdev3_trip_point:4 > /sys/class/thermal/thermal_zone0/mode:enabled > /sys/class/thermal/thermal_zone0/passive:0 > /sys/class/thermal/thermal_zone0/temp:27000 > /sys/class/thermal/thermal_zone0/trip_point_0_temp:256000 > /sys/class/thermal/thermal_zone0/trip_point_0_type:critical > /sys/class/thermal/thermal_zone0/trip_point_1_temp:78000 > /sys/class/thermal/thermal_zone0/trip_point_1_type:active > /sys/class/thermal/thermal_zone0/trip_point_2_temp:70000 > /sys/class/thermal/thermal_zone0/trip_point_2_type:active > /sys/class/thermal/thermal_zone0/trip_point_3_temp:60000 > /sys/class/thermal/thermal_zone0/trip_point_3_type:active > /sys/class/thermal/thermal_zone0/trip_point_4_temp:50000 > /sys/class/thermal/thermal_zone0/trip_point_4_type:active > /sys/class/thermal/thermal_zone0/type:acpitz > /sys/class/thermal/thermal_zone1/cdev0_trip_point:1 > /sys/class/thermal/thermal_zone1/cdev1_trip_point:1 > /sys/class/thermal/thermal_zone1/mode:enabled > /sys/class/thermal/thermal_zone1/temp:29000 > /sys/class/thermal/thermal_zone1/trip_point_0_temp:90000 > /sys/class/thermal/thermal_zone1/trip_point_0_type:critical > /sys/class/thermal/thermal_zone1/trip_point_1_temp:87000 > /sys/class/thermal/thermal_zone1/trip_point_1_type:passive > /sys/class/thermal/thermal_zone1/type:acpitz > /sys/class/thermal/thermal_zone2/mode:enabled > /sys/class/thermal/thermal_zone2/passive:0 > /sys/class/thermal/thermal_zone2/temp:23000 > /sys/class/thermal/thermal_zone2/trip_point_0_temp:105000 > /sys/class/thermal/thermal_zone2/trip_point_0_type:critical > /sys/class/thermal/thermal_zone2/type:acpitz > /sys/class/thermal/thermal_zone3/cdev0_trip_point:1 > /sys/class/thermal/thermal_zone3/cdev1_trip_point:1 > /sys/class/thermal/thermal_zone3/mode:enabled > /sys/class/thermal/thermal_zone3/temp:20000 > /sys/class/thermal/thermal_zone3/trip_point_0_temp:90000 > /sys/class/thermal/thermal_zone3/trip_point_0_type:critical > /sys/class/thermal/thermal_zone3/trip_point_1_temp:60000 > /sys/class/thermal/thermal_zone3/trip_point_1_type:passive > /sys/class/thermal/thermal_zone3/type:acpitz > /sys/class/thermal/thermal_zone4/mode:enabled > /sys/class/thermal/thermal_zone4/passive:0 > /sys/class/thermal/thermal_zone4/temp:100000 > /sys/class/thermal/thermal_zone4/trip_point_0_temp:110000 > /sys/class/thermal/thermal_zone4/trip_point_0_type:critical > /sys/class/thermal/thermal_zone4/type:acpitz > > Regards > -- > Maciej Rutecki > http://www.maciek.unixy.pl
-- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |