[lkml]   [2010]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject2.6.35 -> 2.6.36 panic when vlan and promisc with tg3

only kernel message I was able to capture on serial were:

UG: unable to handle kernel paging request at 01cc921c
IP: [<c034bfce>] vlan_hwaccel_do_receive+0x59/0xd0
*pdpt = 0000000036a2a001 *pde = 0000000000000000
Oops: 0002 [#1] SMP
last sysfs

Then machine dead.

In 2.6.35.x this did not happen (but vlans broken - cannot see vlan
tags with tcpdump),

To reproduce:

ip link set eth0 up
vconfig add eth0 2
ip link set eth0 promisc on

Machines with these ethernet cards I've seen to be affected:

Ethernet controller: Broadcom Corporation NetXtreme BCM5714 Gigabit
Ethernet (rev a3)

Ethernet controller: Broadcom Corporation NetXtreme BCM5752M Gigabit
Ethernet PCI Express (rev 02)

Machine with this card is NOT affected (no vlan hw accel?):

Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast
Ethernet PCI Express (rev 02)


Michael Leun

 \ /
  Last update: 2010-11-29 20:37    [W:0.084 / U:3.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site