[lkml]   [2010]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Message
2010/11/26 Borislav Petkov <>:
> adding linux-ide.

Thank you, i've also attached at this ubuntu bug:
the dmesg from ubuntu 10.10 and 11.04 with bios settings as RAID and AHCI.
I think that setting is only for Sata-2, as the drives are not seen by
the bios in the drive list. Just on the boot orded it see "IDE:
Marvell RAiD".
The drives are seen by the marvell controller after the bios, where
i've setup the raid 0 on them.

Best Regards

Alessandro Tagliapietra

 \ /
  Last update: 2010-11-26 10:03    [W:0.076 / U:3.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site