Messages in this thread Patch in this message | | | Date | Wed, 24 Nov 2010 16:35:35 +0900 | From | Tomoya MORINAGA <> | Subject | [PATCH net-next-2.6 4/17 v2] can: EG20T PCH: Add Tx Flow Control |
| |
Add flow control processing. Currently, there is no flow control processing. Thus, Add flow control processing as when there is no empty of tx buffer, netif_stop_queue is called. When there is empty buffer, netif_wake_queue is called.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> --- drivers/net/can/pch_can.c | 37 +++++++++++++------------------------ 1 files changed, 13 insertions(+), 24 deletions(-)
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c index 5c21f5c..7c182b8 100644 --- a/drivers/net/can/pch_can.c +++ b/drivers/net/can/pch_can.c @@ -900,6 +900,8 @@ MSG_OBJ: dlc = 8; stats->tx_bytes += dlc; stats->tx_packets++; + if (int_stat == PCH_TX_OBJ_END) + netif_wake_queue(ndev); } int_stat = pch_can_int_pending(priv); @@ -1038,47 +1040,34 @@ static int pch_close(struct net_device *ndev) return 0; } -static int pch_get_msg_obj_sts(struct net_device *ndev, u32 obj_id) -{ - u32 buffer_status = 0; - struct pch_can_priv *priv = netdev_priv(ndev); - - /* Getting the message object status. */ - buffer_status = (u32) pch_can_get_buffer_status(priv); - - return buffer_status & obj_id; -} - - static netdev_tx_t pch_xmit(struct sk_buff *skb, struct net_device *ndev) { int i, j; unsigned long flags; struct pch_can_priv *priv = netdev_priv(ndev); struct can_frame *cf = (struct can_frame *)skb->data; - int tx_buffer_avail = 0; + int tx_obj_no = 0; if (can_dropped_invalid_skb(ndev, skb)) return NETDEV_TX_OK; - if (priv->tx_obj == PCH_TX_OBJ_END) { /* Point tail Obj */ - while (pch_get_msg_obj_sts(ndev, (((1 << PCH_TX_OBJ_NUM)-1) << - PCH_RX_OBJ_NUM))) - udelay(500); + if (priv->tx_obj == PCH_TX_OBJ_END) { + if (ioread32(&priv->regs->treq2) & 0xfc00) + netif_stop_queue(ndev); - priv->tx_obj = PCH_TX_OBJ_START; /* Point head of Tx Obj ID */ - tx_buffer_avail = priv->tx_obj; /* Point Tail of Tx Obj */ + tx_obj_no = priv->tx_obj; + priv->tx_obj = PCH_TX_OBJ_START; } else { - tx_buffer_avail = priv->tx_obj; + tx_obj_no = priv->tx_obj; + priv->tx_obj++; } - priv->tx_obj++; /* Attaining the lock. */ spin_lock_irqsave(&priv->msgif_reg_lock, flags); /* Reading the Msg Obj from the Msg RAM to the Interface register. */ iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[1].cmask); - pch_can_check_if_busy(&priv->regs->ifregs[1].creq, tx_buffer_avail); + pch_can_check_if_busy(&priv->regs->ifregs[1].creq, tx_obj_no); /* Setting the CMASK register. */ pch_can_bit_set(&priv->regs->ifregs[1].cmask, PCH_CMASK_ALL); @@ -1110,7 +1099,7 @@ static netdev_tx_t pch_xmit(struct sk_buff *skb, struct net_device *ndev) (&priv->regs->ifregs[1].dataa1) + j*4); } - can_put_echo_skb(skb, ndev, tx_buffer_avail - PCH_RX_OBJ_END - 1); + can_put_echo_skb(skb, ndev, tx_obj_no - PCH_RX_OBJ_END - 1); /* Updating the size of the data. */ pch_can_bit_clear(&priv->regs->ifregs[1].mcont, 0x0f); @@ -1125,7 +1114,7 @@ static netdev_tx_t pch_xmit(struct sk_buff *skb, struct net_device *ndev) pch_can_bit_set(&priv->regs->ifregs[1].mcont, PCH_IF_MCONT_NEWDAT | PCH_IF_MCONT_TXRQXT); - pch_can_check_if_busy(&priv->regs->ifregs[1].creq, tx_buffer_avail); + pch_can_check_if_busy(&priv->regs->ifregs[1].creq, tx_obj_no); spin_unlock_irqrestore(&priv->msgif_reg_lock, flags); -- 1.6.0.6
| |