lkml.org 
[lkml]   [2010]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] of/phylib: Use device tree properties for PHY configuration.
Date
Here is my first take at using the device tree to control PHY
configuration. This first set enables some Marvell PHYs. If the
scheme is deemed acceptable, I would probably do something similar for
Broadcom PHYs as well.

The first patch is the meat of the change. The second adds support
for the 88E1149R PHY that I have on one of my boards.

David Daney (2):
of/phylib: Use device tree properties to initialize Marvell PHYs.
phylib: Add support for Marvell 88E1149R devices.

drivers/net/phy/marvell.c | 135 +++++++++++++++++++++++++++++++++++++++++++
include/linux/marvell_phy.h | 1 +
2 files changed, 136 insertions(+), 0 deletions(-)

--
1.7.2.3



\
 
 \ /
  Last update: 2010-11-18 00:57    [W:0.125 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site