Messages in this thread | | | Subject | Re: [ANNOUNCE] New utility: 'trace' | From | Tom Zanussi <> | Date | Wed, 17 Nov 2010 12:53:24 -0600 |
| |
On Wed, 2010-11-17 at 13:36 -0500, Mathieu Desnoyers wrote: > * Tom Zanussi (tzanussi@gmail.com) wrote: > [...] > > IIRC, I think the conclusion we came to was that it could be done > > mechanically if for example the right-hand-side of an assignment in > > TP_fast_assign() only involved a simple variable assignment, but as > > Steve pointed out, some assignments are more complicated than that. > > Yep, we came up to the same conclusions in UST. > > > For example, in the sched_switch tracepoint assignments: > > > > __entry->prev_prio = prev->prio; > > __entry->prev_state = __trace_sched_switch_state(prev); > > > > so the prev_prio should be able to be tested 'in-line' but the > > prev_state would require a temporary buffer to write the value into > > before doing the test as mentioned by Steve. At which point you're no > > further ahead (in that case) than the current situation... > > if we change all assignments to, e.g.: > > _tp_assign(__entry->prev_prio, prev->prio) > _tp_assign(__entry->prev_state, __trace_sched_switch_state(prev)) > > then we can redefine the macros for filtering much more easily than with the > " = " assignment operator. > > About your comment above, what is the problem with evaluating > "__trace_sched_switch_state(prev)" twice ? It will typically be cache-hot after > the first evaluation, so I wonder if, in practice, we really save a significant > amount of cycles by saving its result between filtering and writing into trace > buffers. As I pointed out earlier, for my customers, having a very, very fast > filter "out" case is more important that trying to squeeze a few cycles out of > the filter passed case. >
But the idea is to avoid allocating the trace buffer in the first place, until we've decided we want the event. So how do you check the result of __trace_sched_switch_state(prev) with the filter value if you don't have it temporarily stored somewhere (not in the trace buffer, which doesn't exist yet as far as this event is concerned)?
Tom
> Also, how many of these "__trace_sched_switch_state(prev)" are static inlines vs > actual function calls ? If it's mostly static inlines to dereference a few > pointers, doing it the second time when the filter passed won't hurt much. > > Thanks, > > Mathieu >
| |