Messages in this thread | | | Subject | Re: 2.6.37-rc2 regression: usb network hotplug | From | Eric Dumazet <> | Date | Wed, 17 Nov 2010 14:05:17 +0100 |
| |
Le mercredi 17 novembre 2010 à 13:10 +0100, Patrick Schaaf a écrit : > When trying out 2.6.37-rc2 on my Dell Latitude D630 laptop, I notice a > regression, compared to plain 2.6.36, related to USB unplugging my N900 > (cdc_ether network device). > > The usb0 interface is configured to automatically plug into a bridge > group, if that matters. > > On 2.6.36 I can unplug and replug the device properly. > > Under 2.6.37-rc2, the first plugging works, the device is reachable as > desired, but after unplugging it the first time, I receive the following > message every 10 seconds: > > kernel:[ 149.632104] unregister_netdevice: waiting for usb0 to become > free. Usage count = 1 > > The usb0 device is gone at that point. Replugging does not work. > > When I reboot into the same kernel, a list of "cannot reset port" > messages is apparent in the boot logs, as appended. This disappears > after shutting down the machine. > > I'll gladly try out patches that could fix this, or try out other things > to help diagnose. > > best regards > Patrick > > <3>[ 4.449056] usb 6-1.2: device not accepting address 3, error -71 > <3>[ 4.452793] hub 6-1:1.0: cannot disable port 2 (err = -71) > <3>[ 4.454787] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.456787] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.458787] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.460787] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.462786] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.464491] hub 6-1:1.0: Cannot enable port 2. Maybe the USB > cable is bad? > <3>[ 4.466787] hub 6-1:1.0: cannot disable port 2 (err = -71) > <3>[ 4.468785] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.470786] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.472787] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.474780] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.476784] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.478261] hub 6-1:1.0: Cannot enable port 2. Maybe the USB > cable is bad? > <3>[ 4.479773] hub 6-1:1.0: cannot disable port 2 (err = -71) > <3>[ 4.481773] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.483772] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.485778] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.487787] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.489789] hub 6-1:1.0: cannot reset port 2 (err = -71) > <3>[ 4.491052] hub 6-1:1.0: Cannot enable port 2. Maybe the USB > cable is bad? > <3>[ 4.492788] hub 6-1:1.0: cannot disable port 2 (err = -71) > <3>[ 4.494079] hub 6-1:1.0: unable to enumerate USB device on port 2 > <3>[ 4.495787] hub 6-1:1.0: cannot disable port 2 (err = -71) > <3>[ 4.497790] hub 6-1:1.0: hub_port_status failed (err = -71) > <6>[ 4.499100] usb 6-1: USB disconnect, address 2 >
Please try
http://patchwork.ozlabs.org/patch/71354/
-- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |