lkml.org 
[lkml]   [2010]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] do not select ACPI_VIDEO in poulsbo stub driver
From
Date
On Wed, 2010-11-17 at 11:04 +0800, Joey Lee wrote:
> Hi Rui,
>
> 於 三,2010-11-17 於 08:42 +0800,Zhang Rui 提到:
> > On Tue, 2010-11-16 at 15:34 +0800, Joey Lee wrote:
> > > Hi Rui,
> > >
> > > Sorry about this patch will not work on my MSi poulsbo machine.
> > >
> > > 於 二,2010-11-16 於 14:04 +0800,Zhang Rui 提到:
> > > > the poulsbo stub driver should not select ACPI video driver.
> > > >
> > > > The reason why i915 driver selects ACPI video driver is that it needs some
> > > > cooperation between these two drivers during initialization, or else the
> > > > system may hang.
> > > >
> > > > So if users want ACPI backlight control, please set CONFIG_ACPI_VIDEO manually.
> > > >
> > > > http://marc.info/?l=linux-acpi&m=128952659018533&w=2
> > > >
> > > > CC: Ingo Molnar <mingo@elte.hu>
> > > > CC: Dave Airlie <airlied@redhat.com>
> > > > CC: Lee, Chun-Yi <joeyli.kernel@gmail.com>
> > > > Signed-off-by: Zhang Rui <rui.zhang@intel.com>
> > > > ---
> > > > drivers/gpu/stub/Kconfig | 11 +----------
> > > > drivers/gpu/stub/poulsbo.c | 5 +----
> > > > 2 files changed, 2 insertions(+), 14 deletions(-)
> > > >
> > > > Index: linux-2.6/drivers/gpu/stub/Kconfig
> > > > ===================================================================
> > > > --- linux-2.6.orig/drivers/gpu/stub/Kconfig
> > > > +++ linux-2.6/drivers/gpu/stub/Kconfig
> > > > @@ -1,16 +1,7 @@
> > > > config STUB_POULSBO
> > > > tristate "Intel GMA500 Stub Driver"
> > > > depends on PCI
> > > > - # Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled
> > > > - # but for select to work, need to select ACPI_VIDEO's dependencies, ick
> > > > - select VIDEO_OUTPUT_CONTROL if ACPI
> > > > - select BACKLIGHT_CLASS_DEVICE if ACPI
> > > > - select INPUT if ACPI
> > > > - select ACPI_VIDEO if ACPI
> > > > help
> > > > Choose this option if you have a system that has Intel GMA500
> > > > (Poulsbo) integrated graphics. If M is selected, the module will
> > > > - be called Poulsbo. This driver is a stub driver for Poulsbo that
> > > > - will call poulsbo.ko to enable the acpi backlight control sysfs
> > > > - entry file because there have no poulsbo native driver can support
> > > > - intel opregion.
> > > > + be called Poulsbo.
> > > > Index: linux-2.6/drivers/gpu/stub/poulsbo.c
> > > > ===================================================================
> > > > --- linux-2.6.orig/drivers/gpu/stub/poulsbo.c
> > > > +++ linux-2.6/drivers/gpu/stub/poulsbo.c
> > > > @@ -11,8 +11,6 @@
> > > >
> > > > #include <linux/module.h>
> > > > #include <linux/pci.h>
> > > > -#include <linux/acpi.h>
> > > > -#include <acpi/video.h>
> > > >
> > > > #define DRIVER_NAME "poulsbo"
> > > >
> > > > @@ -29,12 +27,11 @@ static DEFINE_PCI_DEVICE_TABLE(pciidlist
> > > >
> > > > static int poulsbo_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > > > {
> > > > - return acpi_video_register();
> > > > + return 0;
> > > > }
> > >
> > > Sorry, we cann't remove to call acpi_video_register, because the acpi
> > > video will not generate because there have some poulsbo machine declare
> > > Intel opregion in DSDT but the i915 driver not support poulsbo.
> > >
> > I'm confused.
> > It's the i915 driver that supports Intel Opregion.
> > i.e. for a poulsbo machine with Intel Opregion, loading ACPI video
> > driver won't help neither.
> >
>
> Matthew have a patch:
>
> * http://git.kernel.org/?p=linux/kernel/git/lenb/linux-acpi-2.6.git;a=commitdiff;h=74a365b3f354fafc537efa5867deb7a9fadbfe27
>
> This patch do:
>
> - ACPI video driver will not register if it check the DSDT have opregion table declare.
> - i915_opregion will call acpi_video_register after it initialised the DIDL field in opregion.
>
> That means acpi video driver will blocked when have opregion declare in
> DSDT until i915 drm driver call acpi_video_register. The patch fixed
> BKO#11259, but introduced a side effect: If there have Intel video chip
> not supported by Intel drm driver, the acpi_video_register will never
> called, then some machine have good acpi backlight interface
> implementation will never have acpi brightness sysfs interface for
> userland control. e.g. any Poulsbo netbook.
>
> Matthew's comment to talk about the side effect: Intel IGD opregion and
> GMA500
>
> There have some machines declare opregion in DSDT but they also
> implement the backlight control by EC in _BCM. Like: MSI poulsbo
> netbook.
> Before introduce the above patch to kernel, those machine's acpi
> backlight control works fine. On current kernel, those machines
> backlight control broken.
>
> One function workable with old kernel but broken by new kernel, now.
>
Oh, I see what the problem is.
You're right, this patch doesn't make sense. Sorry for the noise. :)

thanks,
rui

>
> > > That's why we add the poulsbo stub driver to enable the acpi video
> > > because those machine implement acpi _BCL, _BCM interace and control
> > > brightness by ec.
> >
> > I got your idea.
> > I'm not sure if this is right. IMO, the graphics driver and ACPI video
> > driver are independent. I mean, to enable the ACPI backlight control,
> > users should set CONFIG_ACPI_VIDEO explicitly.
> >
> > And again, the reason why i915 driver selects ACPI_VIDEO is that the
> > i915 Opregion code must run *before* ACPI video driver loaded, or else
> > system hangs on some machines.
> > and the reason why DRM_NOUVEAU selects ACPI_VIDEO is that it depends on
> > ACPI to get the EDID info.
> >
>
> Yes, Matthew's patch fix this issue.
>
> > So I don't see a strong reason that STUB_POULSBO should select
> > ACPI_VIDEO.
> >
>
> Does it possible we direct remove the "select ACPI_VIDEO if ACPI" from
> Kconfig but keep the acpi_video_register function call in stub poulsbo
> driver?
> Because acpi/video.h already handle the ACPI VIDEO config check:
>
> #if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE)
> extern int acpi_video_register(void);
> extern void acpi_video_unregister(void);
> extern int acpi_video_get_edid(struct acpi_device *device, int type,
> int device_id, void **edid);
> #else
> static inline int acpi_video_register(void) { return 0; }
> static inline void acpi_video_unregister(void) { return; }
>
>
> Thank's a lot!
> Joey Lee
>
> > thanks,
> > rui
> > >
> > > Here is our discussion:
> > > http://www.spinics.net/lists/linux-acpi/msg30027.html
> > >
> > > >
> > > > static void poulsbo_remove(struct pci_dev *pdev)
> > > > {
> > > > - acpi_video_unregister();
> > > > }
> > > >
> > > > static struct pci_driver poulsbo_driver = {
> > > >
> > > >
> > >
> > > I am sorry I miss understand your last mail for poulsbo stub driver
> > > cann't dependency on input, because your patch is old.
> > >
> > > The following is the newest patch that was send out by me:
> > >
> > >
> > > >From 340b1068b20cfa152ff9992a7d69d19501b57163 Mon Sep 17 00:00:00 2001
> > > From: Lee, Chun-Yi <jlee@novell.com>
> > > Date: Wed, 15 Sep 2010 22:19:25 +0800
> > > Subject: [PATCH] Add Intel GMA500(Poulsbo) Stub Driver
> > >
> > > Currently, there have no GMA500(Poulsbo) native video driver to support
> > > intel opregion. So, use this stub driver to enable the acpi backlight
> > > control sysfs entry files by requrest acpi_video_register.
> > >
> > > Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
> > > ---
> > > drivers/gpu/Makefile | 2 +-
> > > drivers/gpu/stub/Kconfig | 13 +++++++++
> > > drivers/gpu/stub/Makefile | 1 +
> > > drivers/gpu/stub/poulsbo.c | 63 ++++++++++++++++++++++++++++++++++++++++++++
> > > drivers/video/Kconfig | 2 +
> > > 5 files changed, 80 insertions(+), 1 deletions(-)
> > > create mode 100644 drivers/gpu/stub/Kconfig
> > > create mode 100644 drivers/gpu/stub/Makefile
> > > create mode 100644 drivers/gpu/stub/poulsbo.c
> > >
> > > diff --git a/drivers/gpu/Makefile b/drivers/gpu/Makefile
> > > index 30879df..cc92778 100644
> > > --- a/drivers/gpu/Makefile
> > > +++ b/drivers/gpu/Makefile
> > > @@ -1 +1 @@
> > > -obj-y += drm/ vga/
> > > +obj-y += drm/ vga/ stub/
> > > diff --git a/drivers/gpu/stub/Kconfig b/drivers/gpu/stub/Kconfig
> > > new file mode 100644
> > > index 0000000..8f5a540
> > > --- /dev/null
> > > +++ b/drivers/gpu/stub/Kconfig
> > > @@ -0,0 +1,13 @@
> > > +config STUB_POULSBO
> > > + tristate "Intel GMA500 Stub Driver"
> > > + depends on> > + # Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled
> > > + # but for select to work, need to select ACPI_VIDEO's dependencies, ick
> > > + select ACPI_VIDEO if ACPI
> > > + help
> > > + Choose this option if you have a system that has Intel GMA500
> > > + (Poulsbo) integrated graphics. If M is selected, the module will
> > > + be called Poulsbo. This driver is a stub driver for Poulsbo that
> > > + will call poulsbo.ko to enable the acpi backlight control sysfs
> > > + entry file because there have no poulsbo native driver can support
> > > + intel opregion.
> > > diff --git a/drivers/gpu/stub/Makefile b/drivers/gpu/stub/Makefile
> > > new file mode 100644
> > > index 0000000..cd940cc
> > > --- /dev/null
> > > +++ b/drivers/gpu/stub/Makefile
> > > @@ -0,0 +1 @@
> > > +obj-$(CONFIG_STUB_POULSBO) += poulsbo.o
> > > diff --git a/drivers/gpu/stub/poulsbo.c b/drivers/gpu/stub/poulsbo.c
> > > new file mode 100644
> > > index 0000000..d8aa636
> > > --- /dev/null
> > > +++ b/drivers/gpu/stub/poulsbo.c
> > > @@ -0,0 +1,63 @@
> > > +/*
> > > + * Intel Poulsbo Stub driver
> > > + *
> > > + * Copyright (C) 2010 Novell <jlee@novell.com>
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify it
> > > + * under the terms of the GNU General Public License version 2 as published by
> > > + * the Free Software Foundation.
> > > + *
> > > + */
> > > +
> > > +#include <linux/module.h>
> > > +#include <linux/pci.h>
> > > +#include <acpi/video.h>
> > > +
> > > +#define DRIVER_NAME "poulsbo"
> > > +
> > > +enum {
> > > + CHIP_PSB_8108 = 0,
> > > + CHIP_PSB_8109 = 1,
> > > +};
> > > +
> > > +static struct pci_device_id pciidlist[] = {
> > > + {0x8086, 0x8108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PSB_8108}, \
> > > + {0x8086, 0x8109, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PSB_8109}, \
> > > + {0, 0, 0}
> > > +};
> > > +
> > > +static int poulsbo_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > > +{
> > > + return acpi_video_register();
> > > +}
> > > +
> > > +static void poulsbo_remove(struct pci_dev *pdev)
> > > +{
> > > + acpi_video_unregister();
> > > +}
> > > +
> > > +static struct pci_driver poulsbo_driver = {
> > > + .name = DRIVER_NAME,
> > > + .id_table = pciidlist,
> > > + .probe = poulsbo_probe,
> > > + .remove = poulsbo_remove,
> > > +};
> > > +
> > > +static int __init poulsbo_init(void)
> > > +{
> > > + return pci_register_driver(&poulsbo_driver);
> > > +}
> > > +
> > > +static void __exit poulsbo_exit(void)
> > > +{
> > > + pci_unregister_driver(&poulsbo_driver);
> > > +}
> > > +
> > > +module_init(poulsbo_init);
> > > +module_exit(poulsbo_exit);
> > > +
> > > +MODULE_AUTHOR("Lee, Chun-Yi <jlee@novell.com>");
> > > +MODULE_DESCRIPTION("Poulsbo Stub Driver");
> > > +MODULE_LICENSE("GPL");
> > > +
> > > +MODULE_DEVICE_TABLE(pci, pciidlist);
> > > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> > > index 8b31fdf..8807ae5 100644
> > > --- a/drivers/video/Kconfig
> > > +++ b/drivers/video/Kconfig
> > > @@ -17,6 +17,8 @@ source "drivers/gpu/vga/Kconfig"
> > >
> > > source "drivers/gpu/drm/Kconfig"
> > >
> > > +source "drivers/gpu/stub/Kconfig"
> > > +
> > > config VGASTATE
> > > tristate
> > > default n
> >
> >
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-11-17 04:17    [W:0.038 / U:0.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site