lkml.org 
[lkml]   [2010]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 3/5] powerpc/5200: dts: remove unused properties
From
Date
This patch remove unused properties in dts files in preparation of refactoring
the dts files for MPC5200b based boards.

Signed-off-by: John Bonesio <bones@secretlab.ca>
---

arch/powerpc/boot/dts/cm5200.dts | 2 --
arch/powerpc/boot/dts/lite5200b.dts | 3 ---
arch/powerpc/boot/dts/media5200.dts | 2 --
arch/powerpc/boot/dts/motionpro.dts | 2 --
arch/powerpc/boot/dts/pcm030.dts | 2 --
arch/powerpc/boot/dts/pcm032.dts | 2 --
6 files changed, 0 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index 9369dcd..d549897 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -230,8 +230,6 @@
reg = <0 0 0x2000000>;
bank-width = <2>;
device-width = <2>;
- #size-cells = <1>;
- #address-cells = <1>;
};
};
};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index a74b790..c0a4e45 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -174,7 +174,6 @@

psc@2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <0>;
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
};
@@ -198,7 +197,6 @@
// PSC4 in uart mode example
//serial@2600 { // PSC4
// compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- // cell-index = <3>;
// reg = <0x2600 0x100>;
// interrupts = <2 11 0>;
//};
@@ -206,7 +204,6 @@
// PSC5 in uart mode example
//serial@2800 { // PSC5
// compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- // cell-index = <4>;
// reg = <0x2800 0x100>;
// interrupts = <2 12 0>;
//};
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index a70ef68..e027f45 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -185,8 +185,6 @@
// PSC6 in uart mode
console: psc@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <5>;
- port-number = <0>; // Logical port assignment
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
};
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index f6261ea..3ab4666 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -277,8 +277,6 @@
reg = <0 0 0x01000000>;
bank-width = <2>;
device-width = <2>;
- #size-cells = <1>;
- #address-cells = <1>;
};
};
};
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 3a4f554..f3e30bb 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -196,7 +196,6 @@

psc@2400 { /* PSC3 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <2>;
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
};
@@ -207,7 +206,6 @@

psc@2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <5>;
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
};
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 17596c7..e0f2702 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -196,7 +196,6 @@

psc@2400 { /* PSC3 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <2>;
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
};
@@ -207,7 +206,6 @@

psc@2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <5>;
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
};


\
 
 \ /
  Last update: 2010-11-16 21:53    [W:0.219 / U:2.528 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site