lkml.org 
[lkml]   [2010]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 11/19] 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang
On Sat, Nov 13, 2010 at 08:22:07PM +0100, Lawrence Rust wrote:
> On Sat, 2010-11-13 at 06:49 -0800, Greg KH wrote:
> > On Sat, Nov 13, 2010 at 07:18:30AM +0300, Alexey Zaytsev wrote:
> > > Hi.
> > >
> > > This one kills the serial console for me. Luckily, in qemu:
> > >
> > > (gdb) bt
> > > #0 __const_udelay (xloops=4295000) at arch/x86/lib/delay.c:117
> > > #1 0xc137ab7c in panic (fmt=0xc147f8e1 "Attempted to kill the idle task!")
> > > at kernel/panic.c:151
> > > #2 0xc1020731 in do_exit (code=9) at kernel/exit.c:915
> > > #3 0xc100476a in oops_end (flags=70, regs=<value optimized out>, signr=9)
> > > at arch/x86/kernel/dumpstack.c:265
> > > #4 0xc1014317 in no_context (regs=0xc14ebe68, error_code=<value
> > > optimized out>,
> > > address=192) at arch/x86/mm/fault.c:673
> > > #5 0xc1014411 in __bad_area_nosemaphore (regs=0xc14ebe68,
> > > error_code=<value optimized out>, address=192, si_code=196609)
> > > at arch/x86/mm/fault.c:739
> > > #6 0xc1014426 in bad_area_nosemaphore (regs=0x418958, error_code=81,
> > > address=3238124885) at arch/x86/mm/fault.c:746
> > > #7 0xc101475a in do_page_fault (regs=0xc14ebe68, error_code=0)
> > > at arch/x86/mm/fault.c:1070
> > > #8 0xc137ced9 in ?? () at arch/x86/kernel/entry_32.S:1265
> > > #9 0xc11db236 in list_empty (head=0xc0) at include/linux/list.h:182
> > > #10 0xc11db374 in waitqueue_active (q=0x98) at include/linux/wait.h:115
> > > #11 0xc11dea4e in serial8250_do_set_termios (port=0xc1c31320,
> > > termios=0xc14ebf2c,
> > > old=0xc1c31240) at drivers/serial/8250.c:2349
> > > #12 0xc11decb6 in serial8250_set_termios (port=0xc1c31320, termios=0xc14ebf2c,
> > > old=0xc1c31240) at drivers/serial/8250.c:2424
> > > #13 0xc11da10b in uart_set_options (port=0xc1c31320, co=0xc164f0a0, baud=9600,
> > > parity=110, bits=8, flow=110) at drivers/serial/serial_core.c:1935
> > > #14 0xc1684d30 in serial8250_console_setup (co=0xc164f0a0, options=0x0)
> > > at drivers/serial/8250.c:2864
> > > #15 0xc101e46f in register_console (newcon=0xc164f0a0) at kernel/printk.c:1300
> > > #16 0xc1684d5e in serial8250_console_init () at drivers/serial/8250.c:2889
> > > #17 0xc1683da0 in console_init () at drivers/tty/tty_io.c:3208
> > > #18 0xc166b7ba in start_kernel () at init/main.c:635
> > > #19 0xc166b0b7 in i386_start_kernel () at arch/x86/kernel/head32.c:75
> > > #20 0x00000000 in ?? ()
> > > (gdb) p up->port.state
> > > $13 = (struct uart_state *) 0x0
> > >
> >
> > Ick.
> >
> > Lawrence, any ideas? If not, I'm going to have to revert this patch
> > from the tree.
>
> Maybe best to pull the patch for now and have a re-think. Shame, it
> seemed so easy and the fix works for me with a simple modem input. I'll
> re-submit later..

Linus has now reverted it in his tree.

thanks,

greg k-h


\
 
 \ /
  Last update: 2010-11-14 00:53    [W:0.068 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site