lkml.org 
[lkml]   [2010]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] MTD: NAND: jz4740: Remove custom {read,write}_page handlers
Date
Now that the mtd core supports more then 64 ecc bytes we can use it instead of
some a custom hack in the jz4740 nand driver.
This patch removes the custom {read,write}_page handlers from the jz4740 nand
driver. Thus the driver will now fallback to the default handlers from the nand
core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/mtd/nand/jz4740_nand.c | 55 ----------------------------------------
1 files changed, 0 insertions(+), 55 deletions(-)

diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index c9e2a59..cea38a5 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -251,58 +251,6 @@ static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
return 0;
}

-
-/* Copy paste of nand_read_page_hwecc_oob_first except for different eccpos
- * handling. The ecc area is for 4k chips 72 bytes long and thus does not fit
- * into the eccpos array. */
-static int jz_nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf, int page)
-{
- int i, eccsize = chip->ecc.size;
- int eccbytes = chip->ecc.bytes;
- int eccsteps = chip->ecc.steps;
- uint8_t *p = buf;
- unsigned int ecc_offset = chip->page_shift;
-
- /* Read the OOB area first */
- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
- chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-
- for (i = ecc_offset; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- int stat;
-
- chip->ecc.hwctl(mtd, NAND_ECC_READ);
- chip->read_buf(mtd, p, eccsize);
-
- stat = chip->ecc.correct(mtd, p, &chip->oob_poi[i], NULL);
- if (stat < 0)
- mtd->ecc_stats.failed++;
- else
- mtd->ecc_stats.corrected += stat;
- }
- return 0;
-}
-
-/* Copy-and-paste of nand_write_page_hwecc with different eccpos handling. */
-static void jz_nand_write_page_hwecc(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf)
-{
- int i, eccsize = chip->ecc.size;
- int eccbytes = chip->ecc.bytes;
- int eccsteps = chip->ecc.steps;
- const uint8_t *p = buf;
- unsigned int ecc_offset = chip->page_shift;
-
- for (i = ecc_offset; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
- chip->write_buf(mtd, p, eccsize);
- chip->ecc.calculate(mtd, p, &chip->oob_poi[i]);
- }
-
- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
-}
-
#ifdef CONFIG_MTD_CMDLINE_PARTS
static const char *part_probes[] = {"cmdline", NULL};
#endif
@@ -393,9 +341,6 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
chip->ecc.size = 512;
chip->ecc.bytes = 9;

- chip->ecc.read_page = jz_nand_read_page_hwecc_oob_first;
- chip->ecc.write_page = jz_nand_write_page_hwecc;
-
if (pdata)
chip->ecc.layout = pdata->ecc_layout;

--
1.5.6.5


\
 
 \ /
  Last update: 2010-11-11 19:05    [W:0.067 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site