lkml.org 
[lkml]   [2010]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/5] vfio: Add ioctl to re-enable interrupts
Date
Clearing the INTx disable bit from userspace requires two ioctls,
we can do it from vfio with only one. This also better defines the
API and allows us to support non-PCI-2.3 compliant devices.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---

drivers/vfio/vfio_intrs.c | 17 +++++++++++++++++
drivers/vfio/vfio_main.c | 4 ++++
include/linux/vfio.h | 3 +++
3 files changed, 24 insertions(+), 0 deletions(-)

diff --git a/drivers/vfio/vfio_intrs.c b/drivers/vfio/vfio_intrs.c
index aaee175..a57d5aa 100644
--- a/drivers/vfio/vfio_intrs.c
+++ b/drivers/vfio/vfio_intrs.c
@@ -83,6 +83,23 @@ done:
return ret;
}

+int vfio_irq_eoi(struct vfio_dev *vdev)
+{
+ struct pci_dev *pdev = vdev->pdev;
+ u16 cmd;
+
+ spin_lock_irq(&vdev->irqlock);
+ pci_block_user_cfg_access(pdev);
+
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ cmd &= ~PCI_COMMAND_INTX_DISABLE;
+ pci_write_config_word(pdev, PCI_COMMAND, cmd);
+
+ pci_unblock_user_cfg_access(pdev);
+ spin_unlock_irq(&vdev->irqlock);
+ return 0;
+}
+
/*
* MSI and MSI-X Interrupt handler.
* Just signal an event
diff --git a/drivers/vfio/vfio_main.c b/drivers/vfio/vfio_main.c
index f671795..72db79c 100644
--- a/drivers/vfio/vfio_main.c
+++ b/drivers/vfio/vfio_main.c
@@ -464,6 +464,10 @@ static long vfio_unl_ioctl(struct file *filep,
ret = vfio_domain_unset(vdev);
break;

+ case VFIO_IRQ_EOI:
+ ret = vfio_irq_eoi(vdev);
+ break;
+
default:
return -EINVAL;
}
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index c491180..73d7e84 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -155,6 +155,7 @@ void vfio_error_resume(struct pci_dev *);
#define VFIO_SUSPEND_REPLY_TIMEOUT (5*HZ)

irqreturn_t vfio_interrupt(int, void *);
+int vfio_irq_eoi(struct vfio_dev *);

#endif /* __KERNEL__ */

@@ -198,6 +199,8 @@ struct vfio_dma_map {
/* Unset the IOMMU domain */
#define VFIO_DOMAIN_UNSET _IO(';', 108)

+/* Re-enable INTx */
+#define VFIO_IRQ_EOI _IO(';', 109)
/*
* Reads, writes, and mmaps determine which PCI BAR (or config space)
* from the high level bits of the file offset


\
 
 \ /
  Last update: 2010-10-30 19:05    [W:0.112 / U:0.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site