lkml.org 
[lkml]   [2010]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 1/2] move arch_init_ideal_nop5 later
arch_init_ideal_nop5() was being called from setup_arch() before
the exception table was setup. Move it later into
alternative_instructions().

Fixes a boot hang on OLPC's XO-1 laptop based on Geode LX
processor.


Reported-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Jason Baron <jbaron@redhat.com>
---
arch/x86/include/asm/alternative.h | 1 -
arch/x86/kernel/alternative.c | 132 ++++++++++++++++++------------------
arch/x86/kernel/setup.c | 6 --
3 files changed, 67 insertions(+), 72 deletions(-)

diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 76561d2..2a7f618 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -186,7 +186,6 @@ extern void *text_poke_smp(void *addr, const void *opcode, size_t len);
#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL)
#define IDEAL_NOP_SIZE_5 5
extern unsigned char ideal_nop5[IDEAL_NOP_SIZE_5];
-extern void arch_init_ideal_nop5(void);
#else
static inline void arch_init_ideal_nop5(void) {}
#endif
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index a36bb90..9f39a1c 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -452,6 +452,71 @@ extern struct paravirt_patch_site __start_parainstructions[],
__stop_parainstructions[];
#endif /* CONFIG_PARAVIRT */

+#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL)
+
+unsigned char ideal_nop5[IDEAL_NOP_SIZE_5];
+
+static void __init arch_init_ideal_nop5(void)
+{
+ extern const unsigned char ftrace_test_p6nop[];
+ extern const unsigned char ftrace_test_nop5[];
+ extern const unsigned char ftrace_test_jmp[];
+ int faulted = 0;
+
+ /*
+ * There is no good nop for all x86 archs.
+ * We will default to using the P6_NOP5, but first we
+ * will test to make sure that the nop will actually
+ * work on this CPU. If it faults, we will then
+ * go to a lesser efficient 5 byte nop. If that fails
+ * we then just use a jmp as our nop. This isn't the most
+ * efficient nop, but we can not use a multi part nop
+ * since we would then risk being preempted in the middle
+ * of that nop, and if we enabled tracing then, it might
+ * cause a system crash.
+ *
+ * TODO: check the cpuid to determine the best nop.
+ */
+ asm volatile (
+ "ftrace_test_jmp:"
+ "jmp ftrace_test_p6nop\n"
+ "nop\n"
+ "nop\n"
+ "nop\n" /* 2 byte jmp + 3 bytes */
+ "ftrace_test_p6nop:"
+ P6_NOP5
+ "jmp 1f\n"
+ "ftrace_test_nop5:"
+ ".byte 0x66,0x66,0x66,0x66,0x90\n"
+ "1:"
+ ".section .fixup, \"ax\"\n"
+ "2: movl $1, %0\n"
+ " jmp ftrace_test_nop5\n"
+ "3: movl $2, %0\n"
+ " jmp 1b\n"
+ ".previous\n"
+ _ASM_EXTABLE(ftrace_test_p6nop, 2b)
+ _ASM_EXTABLE(ftrace_test_nop5, 3b)
+ : "=r"(faulted) : "0" (faulted));
+
+ switch (faulted) {
+ case 0:
+ pr_info("converting mcount calls to 0f 1f 44 00 00\n");
+ memcpy(ideal_nop5, ftrace_test_p6nop, IDEAL_NOP_SIZE_5);
+ break;
+ case 1:
+ pr_info("converting mcount calls to 66 66 66 66 90\n");
+ memcpy(ideal_nop5, ftrace_test_nop5, IDEAL_NOP_SIZE_5);
+ break;
+ case 2:
+ pr_info("converting mcount calls to jmp . + 5\n");
+ memcpy(ideal_nop5, ftrace_test_jmp, IDEAL_NOP_SIZE_5);
+ break;
+ }
+
+}
+#endif
+
void __init alternative_instructions(void)
{
/* The patching is not fully atomic, so try to avoid local interruptions
@@ -508,6 +573,8 @@ void __init alternative_instructions(void)
(unsigned long)__smp_locks_end);

restart_nmi();
+
+ arch_init_ideal_nop5();
}

/**
@@ -641,68 +708,3 @@ void *__kprobes text_poke_smp(void *addr, const void *opcode, size_t len)
__stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
return addr;
}
-
-#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL)
-
-unsigned char ideal_nop5[IDEAL_NOP_SIZE_5];
-
-void __init arch_init_ideal_nop5(void)
-{
- extern const unsigned char ftrace_test_p6nop[];
- extern const unsigned char ftrace_test_nop5[];
- extern const unsigned char ftrace_test_jmp[];
- int faulted = 0;
-
- /*
- * There is no good nop for all x86 archs.
- * We will default to using the P6_NOP5, but first we
- * will test to make sure that the nop will actually
- * work on this CPU. If it faults, we will then
- * go to a lesser efficient 5 byte nop. If that fails
- * we then just use a jmp as our nop. This isn't the most
- * efficient nop, but we can not use a multi part nop
- * since we would then risk being preempted in the middle
- * of that nop, and if we enabled tracing then, it might
- * cause a system crash.
- *
- * TODO: check the cpuid to determine the best nop.
- */
- asm volatile (
- "ftrace_test_jmp:"
- "jmp ftrace_test_p6nop\n"
- "nop\n"
- "nop\n"
- "nop\n" /* 2 byte jmp + 3 bytes */
- "ftrace_test_p6nop:"
- P6_NOP5
- "jmp 1f\n"
- "ftrace_test_nop5:"
- ".byte 0x66,0x66,0x66,0x66,0x90\n"
- "1:"
- ".section .fixup, \"ax\"\n"
- "2: movl $1, %0\n"
- " jmp ftrace_test_nop5\n"
- "3: movl $2, %0\n"
- " jmp 1b\n"
- ".previous\n"
- _ASM_EXTABLE(ftrace_test_p6nop, 2b)
- _ASM_EXTABLE(ftrace_test_nop5, 3b)
- : "=r"(faulted) : "0" (faulted));
-
- switch (faulted) {
- case 0:
- pr_info("converting mcount calls to 0f 1f 44 00 00\n");
- memcpy(ideal_nop5, ftrace_test_p6nop, IDEAL_NOP_SIZE_5);
- break;
- case 1:
- pr_info("converting mcount calls to 66 66 66 66 90\n");
- memcpy(ideal_nop5, ftrace_test_nop5, IDEAL_NOP_SIZE_5);
- break;
- case 2:
- pr_info("converting mcount calls to jmp . + 5\n");
- memcpy(ideal_nop5, ftrace_test_jmp, IDEAL_NOP_SIZE_5);
- break;
- }
-
-}
-#endif
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 0ac571d..850059d 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -112,7 +112,6 @@
#include <asm/numa_64.h>
#endif
#include <asm/mce.h>
-#include <asm/alternative.h>

/*
* end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
@@ -695,7 +694,6 @@ void __init setup_arch(char **cmdline_p)
{
int acpi = 0;
int k8 = 0;
- unsigned long flags;

#ifdef CONFIG_X86_32
memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
@@ -1055,10 +1053,6 @@ void __init setup_arch(char **cmdline_p)
x86_init.oem.banner();

mcheck_init();
-
- local_irq_save(flags);
- arch_init_ideal_nop5();
- local_irq_restore(flags);
}

#ifdef CONFIG_X86_32
--
1.7.1


\
 
 \ /
  Last update: 2010-10-27 23:11    [W:0.093 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site