lkml.org 
[lkml]   [2010]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/22] trivial: fix typos concerning "address"
Date
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
Documentation/networking/caif/spi_porting.txt | 2 +-
Documentation/powerpc/booting-without-of.txt | 2 +-
arch/arm/common/it8152.c | 2 +-
.../mach-bcmring/include/mach/csp/dmacHw_priv.h | 2 +-
.../arm/mach-bcmring/include/mach/csp/dmacHw_reg.h | 2 +-
arch/arm/mach-u300/include/mach/coh901318.h | 2 +-
arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 +-
.../mach-bf518/include/mach/defBF51x_base.h | 2 +-
.../mach-bf527/include/mach/defBF52x_base.h | 2 +-
arch/blackfin/mach-bf537/include/mach/defBF534.h | 2 +-
arch/blackfin/mach-bf538/include/mach/defBF539.h | 2 +-
arch/cris/arch-v32/lib/nand_init.S | 2 +-
arch/mips/include/asm/mach-powertv/ioremap.h | 2 +-
arch/mips/pci/pcie-octeon.c | 2 +-
arch/mips/txx9/generic/pci.c | 2 +-
arch/sh/mm/cache-sh5.c | 2 +-
arch/sparc/kernel/traps_64.c | 2 +-
arch/x86/include/asm/pgalloc.h | 2 +-
drivers/edac/cell_edac.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 2 +-
drivers/media/video/davinci/vpif.h | 2 +-
drivers/net/bnx2x/bnx2x_reg.h | 2 +-
drivers/net/bonding/bond_3ad.c | 4 ++--
drivers/net/chelsio/subr.c | 2 +-
drivers/net/cxgb3/t3_hw.c | 2 +-
drivers/net/e1000/e1000_main.c | 2 +-
drivers/net/e1000e/phy.c | 2 +-
drivers/net/eepro.c | 2 +-
drivers/net/ll_temac_main.c | 2 +-
drivers/net/tehuti.c | 2 +-
drivers/net/tun.c | 2 +-
drivers/net/vxge/vxge-traffic.h | 2 +-
drivers/net/wimax/i2400m/driver.c | 2 +-
drivers/net/wireless/ath/ath5k/reg.h | 6 +++---
drivers/net/wireless/iwlwifi/iwl-sta.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 2 +-
drivers/net/wireless/wl3501_cs.c | 2 +-
drivers/scsi/a100u2w.c | 2 +-
drivers/scsi/aic94xx/aic94xx_reg_def.h | 4 ++--
drivers/spi/atmel_spi.c | 4 ++--
drivers/usb/wusbcore/wa-rpipe.c | 2 +-
fs/ext4/ext4.h | 2 +-
include/acpi/actbl1.h | 2 +-
include/net/sctp/user.h | 4 ++--
kernel/kexec.c | 2 +-
kernel/sysctl_binary.c | 2 +-
kernel/trace/trace_entries.h | 2 +-
net/decnet/dn_dev.c | 2 +-
sound/pci/ca0106/ca0106.h | 2 +-
sound/pci/emu10k1/emu10k1x.c | 2 +-
sound/pci/emu10k1/p16v.h | 2 +-
sound/pci/es1968.c | 2 +-
sound/pci/rme9652/hdspm.c | 2 +-
53 files changed, 60 insertions(+), 60 deletions(-)
diff --git a/Documentation/networking/caif/spi_porting.txt b/Documentation/networking/caif/spi_porting.txt
index 61d7c92..0cb8cb9 100644
--- a/Documentation/networking/caif/spi_porting.txt
+++ b/Documentation/networking/caif/spi_porting.txt
@@ -32,7 +32,7 @@ the physical hardware, both with regard to SPI and to GPIOs.
This function is called by the CAIF SPI interface to give
you a chance to set up your hardware to be ready to receive
a stream of data from the master. The xfer structure contains
- both physical and logical adresses, as well as the total length
+ both physical and logical addresses, as well as the total length
of the transfer in both directions.The dev parameter can be used
to map to different CAIF SPI slave devices.

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 302db5d..1c6660d 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1098,7 +1098,7 @@ supported currently at the toplevel.
* an arbitrary array of bytes
*/

- childnode@addresss { /* define a child node named "childnode"
+ childnode@address { /* define a child node named "childnode"
* whose unit name is "childnode at
* address"
*/
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 1bec96e..60dc077 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -236,7 +236,7 @@ static struct resource it8152_mem = {

/*
* The following functions are needed for DMA bouncing.
- * ITE8152 chip can addrees up to 64MByte, so all the devices
+ * ITE8152 chip can address up to 64MByte, so all the devices
* connected to ITE8152 (PCI and USB) should have limited DMA window
*/

diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
index cbf334d..d67e2f8 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -28,7 +28,7 @@

/* Data type for DMA Link List Item */
typedef struct {
- uint32_t sar; /* Source Adress Register.
+ uint32_t sar; /* Source Address Register.
Address must be aligned to CTLx.SRC_TR_WIDTH. */
uint32_t dar; /* Destination Address Register.
Address must be aligned to CTLx.DST_TR_WIDTH. */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
index 891cea8..f1ecf96 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -35,7 +35,7 @@ typedef struct {

/* Data type representing DMA channel registers */
typedef struct {
- dmacHw_REG64_t ChannelSar; /* Source Adress Register. 64 bits (upper 32 bits are reserved)
+ dmacHw_REG64_t ChannelSar; /* Source Address Register. 64 bits (upper 32 bits are reserved)
Address must be aligned to CTLx.SRC_TR_WIDTH.
*/
dmacHw_REG64_t ChannelDar; /* Destination Address Register.64 bits (upper 32 bits are reserved)
diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h
index 193da2d..2013d2b 100644
--- a/arch/arm/mach-u300/include/mach/coh901318.h
+++ b/arch/arm/mach-u300/include/mach/coh901318.h
@@ -24,7 +24,7 @@
* @src_addr: transfer source address
* @dst_addr: transfer destination address
* @link_addr: physical address to next lli
- * @virt_link_addr: virtual addres of next lli (only used by pool_free)
+ * @virt_link_addr: virtual address of next lli (only used by pool_free)
* @phy_this: physical address of current lli (only used by pool_free)
*/
struct coh901318_lli {
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 7eaa8ed..79ac24c 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -339,7 +339,7 @@ struct omap_hwmod_omap2_prcm {
/**
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
* @clkctrl_reg: PRCM address of the clock control register
- * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM
+ * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
* @submodule_wkdep_bit: bit shift of the WKDEP range
*/
struct omap_hwmod_omap4_prcm {
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index 5f84913..750f4d8 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -1197,7 +1197,7 @@
#define SADD_LEN 0x0002 /* Slave Address Length */
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+#define GEN 0x0010 /* General Call Address Matching Enabled */

/* TWI_SLAVE_STAT Masks */
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index 0947503..e3ab78e 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -1206,7 +1206,7 @@
#define SADD_LEN 0x0002 /* Slave Address Length */
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+#define GEN 0x0010 /* General Call Address Matching Enabled */

/* TWI_SLAVE_STAT Masks */
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index 0323e6b..042064b 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -1523,7 +1523,7 @@
#define SADD_LEN 0x0002 /* Slave Address Length */
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+#define GEN 0x0010 /* General Call Address Matching Enabled */

/* TWI_SLAVE_STAT Masks */
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index 7a8ac5f..d85d128 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -2185,7 +2185,7 @@
#define SADD_LEN 0x0002 /* Slave Address Length */
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+#define GEN 0x0010 /* General Call Address Matching Enabled */

/* TWIx_SLAVE_STAT Masks */
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S
index e705f5c..d671fed 100644
--- a/arch/cris/arch-v32/lib/nand_init.S
+++ b/arch/cris/arch-v32/lib/nand_init.S
@@ -139,7 +139,7 @@ copy_nand_to_ram:
lsrq 8, $r4
move.b $r4, [$r1] ; Row address
lsrq 8, $r4
- move.b $r4, [$r1] ; Row adddress
+ move.b $r4, [$r1] ; Row address
moveq 20, $r4
2: bne 2b
subq 1, $r4
diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h
index 076f2ee..c86ef09 100644
--- a/arch/mips/include/asm/mach-powertv/ioremap.h
+++ b/arch/mips/include/asm/mach-powertv/ioremap.h
@@ -88,7 +88,7 @@ static inline dma_addr_t _dma_to_phys_offset_raw(dma_addr_t dma)
}

/* These are not portable and should not be used in drivers. Drivers should
- * be using ioremap() and friends to map physical addreses to virtual
+ * be using ioremap() and friends to map physical addresses to virtual
* addresses and dma_map*() and friends to map virtual addresses into DMA
* addresses and back.
*/
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 385f035..0583c46 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -900,7 +900,7 @@ static int cvmx_pcie_rc_initialize(int pcie_port)
mem_access_subid.s.ror = 0;
/* Disable Relaxed Ordering for Writes. */
mem_access_subid.s.row = 0;
- /* PCIe Adddress Bits <63:34>. */
+ /* PCIe Address Bits <63:34>. */
mem_access_subid.s.ba = 0;

/*
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 9a0be81..96e69a0 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -107,7 +107,7 @@ int txx9_pci_mem_high __initdata;

/*
* allocate pci_controller and resources.
- * mem_base, io_base: physical addresss. 0 for auto assignment.
+ * mem_base, io_base: physical address. 0 for auto assignment.
* mem_size and io_size means max size on auto assignment.
* pcic must be &txx9_primary_pcic or NULL.
*/
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index eb4cc4e..d1bffbc 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -568,7 +568,7 @@ static void sh5_flush_dcache_page(void *page)
}

/*
- * Flush the range [start,end] of kernel virtual adddress space from
+ * Flush the range [start,end] of kernel virtual address space from
* the I-cache. The corresponding range must be purged from the
* D-cache also because the SH-5 doesn't have cache snooping between
* the caches. The addresses will be visible through the superpage
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 42ad2ba..1e97709 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -622,7 +622,7 @@ static const char CHAFSR_PERR_msg[] =
static const char CHAFSR_IERR_msg[] =
"Internal processor error";
static const char CHAFSR_ISAP_msg[] =
- "System request parity error on incoming addresss";
+ "System request parity error on incoming address";
static const char CHAFSR_UCU_msg[] =
"Uncorrectable E-cache ECC error for ifetch/data";
static const char CHAFSR_UCC_msg[] =
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index 271de94..b4389a4 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -92,7 +92,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);

static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
- unsigned long adddress)
+ unsigned long address)
{
___pmd_free_tlb(tlb, pmd);
}
diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c
index c973004..db1df59 100644
--- a/drivers/edac/cell_edac.c
+++ b/drivers/edac/cell_edac.c
@@ -47,7 +47,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar)
offset = address & ~PAGE_MASK;
syndrome = (ar & 0x000000001fe00000ul) >> 21;

- /* TODO: Decoding of the error addresss */
+ /* TODO: Decoding of the error address */
edac_mc_handle_ce(mci, csrow->first_page + pfn, offset,
syndrome, 0, chan, "");
}
@@ -68,7 +68,7 @@ static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar)
pfn = address >> PAGE_SHIFT;
offset = address & ~PAGE_MASK;

- /* TODO: Decoding of the error addresss */
+ /* TODO: Decoding of the error address */
edac_mc_handle_ue(mci, csrow->first_page + pfn, offset, 0, "");
}

diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index fe359a2..4707cbd 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -1314,7 +1314,7 @@ typedef struct _GET_ENGINE_CLOCK_PARAMETERS
typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
{
USHORT usPrescale; //Ratio between Engine clock and I2C clock
- USHORT usVRAMAddress; //Adress in Frame Buffer where to pace raw EDID
+ USHORT usVRAMAddress; //Address in Frame Buffer where to pace raw EDID
USHORT usStatus; //When use output: lower byte EDID checksum, high byte hardware status
//WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte
UCHAR ucSlaveAddr; //Read from which slave
diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h
index 188841b..ebd5c43 100644
--- a/drivers/media/video/davinci/vpif.h
+++ b/drivers/media/video/davinci/vpif.h
@@ -33,7 +33,7 @@ extern spinlock_t vpif_lock;
#define regr(reg) readl((reg) + vpif_base)
#define regw(value, reg) writel(value, (reg + vpif_base))

-/* Register Addresss Offsets */
+/* Register Address Offsets */
#define VPIF_PID (0x0000)
#define VPIF_CH0_CTRL (0x0004)
#define VPIF_CH1_CTRL (0x0008)
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 1cefe48..245220a 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -1604,7 +1604,7 @@
(~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */
#define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc
/* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses
- in this register. addres 0 - timer 1; address 1 - timer 2, ... address 7 -
+ in this register. address 0 - timer 1; address 1 - timer 2, ... address 7 -
timer 8 */
#define MISC_REG_SW_TIMER_VAL 0xa5c0
/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 881914b..30f368d 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -840,7 +840,7 @@ static int ad_lacpdu_send(struct port *port)
lacpdu_header = (struct lacpdu_header *)skb_put(skb, length);

memcpy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
- /* Note: source addres is set to be the member's PERMANENT address,
+ /* Note: source address is set to be the member's PERMANENT address,
because we use it to identify loopback lacpdus in receive. */
memcpy(lacpdu_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU;
@@ -881,7 +881,7 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker)
marker_header = (struct bond_marker_header *)skb_put(skb, length);

memcpy(marker_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
- /* Note: source addres is set to be the member's PERMANENT address,
+ /* Note: source address is set to be the member's PERMANENT address,
because we use it to identify loopback MARKERs in receive. */
memcpy(marker_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
marker_header->hdr.h_proto = PKT_TYPE_LACPDU;
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index 63ebf76..8a43c7e 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -556,7 +556,7 @@ struct chelsio_vpd_t {
#define EEPROM_MAX_POLL 4

/*
- * Read SEEPROM. A zero is written to the flag register when the addres is
+ * Read SEEPROM. A zero is written to the flag register when the address is
* written to the Control register. The hardware device will set the flag to a
* one when 4B have been transferred to the Data register.
*/
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 3a6adf0..0b19704 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -607,7 +607,7 @@ struct t3_vpd {
*
* Read a 32-bit word from a location in VPD EEPROM using the card's PCI
* VPD ROM capability. A zero is written to the flag bit when the
- * addres is written to the control register. The hardware device will
+ * address is written to the control register. The hardware device will
* set the flag to 1 when 4 bytes have been read into the data register.
*/
int t3_seeprom_read(struct adapter *adapter, u32 addr, __le32 *data)
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4686c39..1b8a43a 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2194,7 +2194,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
* addresses take precedence to avoid disabling unicast filtering
* when possible.
*
- * RAR 0 is used for the station MAC adddress
+ * RAR 0 is used for the station MAC address
* if there are not 14 addresses, go ahead and clear the filters
*/
i = 1;
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 3d3dc0c..b9bff5b 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -2976,7 +2976,7 @@ s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
}

/**
- * e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page
+ * e1000_get_phy_addr_for_hv_page - Get PHY address based on page
* @page: page to be accessed
**/
static u32 e1000_get_phy_addr_for_hv_page(u32 page)
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 7c82631..dbaec54 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1760,7 +1760,7 @@ module_param_array(io, int, NULL, 0);
module_param_array(irq, int, NULL, 0);
module_param_array(mem, int, NULL, 0);
module_param(autodetect, int, 0);
-MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
+MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)");
MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 9f8e702..661ed1f 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -238,7 +238,7 @@ static int temac_dma_bd_init(struct net_device *ndev)
goto out;
}
/* allocate the tx and rx ring buffer descriptors. */
- /* returns a virtual addres and a physical address. */
+ /* returns a virtual address and a physical address. */
lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
sizeof(*lp->tx_bd_v) * TX_BD_NUM,
&lp->tx_bd_p, GFP_KERNEL);
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 8b3dc1e..62ee1cd 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -821,7 +821,7 @@ static void bdx_setmulti(struct net_device *ndev)
}

/* use PMF to accept first MAC_MCST_NUM (15) addresses */
- /* TBD: sort addreses and write them in ascending order
+ /* TBD: sort addresses and write them in ascending order
* into RX_MAC_MCST regs. we skip this phase now and accept ALL
* multicast frames throu IMF */
/* accept the rest of addresses throu IMF */
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 55f3a3e..e625f95 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1309,7 +1309,7 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd,
break;

case SIOCGIFHWADDR:
- /* Get hw addres */
+ /* Get hw address */
memcpy(ifr.ifr_hwaddr.sa_data, tun->dev->dev_addr, ETH_ALEN);
ifr.ifr_hwaddr.sa_family = tun->dev->type;
if (copy_to_user(argp, &ifr, ifreq_len))
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h
index 9890d4d..6542958 100644
--- a/drivers/net/vxge/vxge-traffic.h
+++ b/drivers/net/vxge/vxge-traffic.h
@@ -1695,7 +1695,7 @@ struct vxge_hw_device_stats_sw_err {
* struct vxge_hw_device_stats - Contains HW per-device statistics,
* including hw.
* @devh: HW device handle.
- * @dma_addr: DMA addres of the %hw_info. Given to device to fill-in the stats.
+ * @dma_addr: DMA address of the %hw_info. Given to device to fill-in the stats.
* @hw_info_dmah: DMA handle used to map hw statistics onto the device memory
* space.
* @hw_info_dma_acch: One more DMA handle used subsequently to free the
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index cdedab4..bcb483f 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -280,7 +280,7 @@ int i2400m_check_mac_addr(struct i2400m *i2400m)
result);
goto error;
}
- /* Extract MAC addresss */
+ /* Extract MAC address */
ddi = (void *) skb->data;
BUILD_BUG_ON(ETH_ALEN != sizeof(ddi->mac_address));
d_printf(2, dev, "GET DEVICE INFO: mac addr %pM\n",
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index ca79ecd..2a246d1 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -1063,7 +1063,7 @@
/*
* EEPROM command register
*/
-#define AR5K_EEPROM_CMD 0x6008 /* Register Addres */
+#define AR5K_EEPROM_CMD 0x6008 /* Register Address */
#define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */
#define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */
#define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */
@@ -1083,7 +1083,7 @@
/*
* EEPROM config register
*/
-#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */
+#define AR5K_EEPROM_CFG 0x6010 /* Register Address */
#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */
#define AR5K_EEPROM_CFG_SIZE_AUTO 0
#define AR5K_EEPROM_CFG_SIZE_4KBIT 1
@@ -1125,7 +1125,7 @@
* Second station id register (Upper 16 bits of MAC address + PCU settings)
*/
#define AR5K_STA_ID1 0x8004 /* Register Address */
-#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC addres */
+#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC address */
#define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */
#define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */
#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 7c7f7dc..972b738 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -107,7 +107,7 @@ static int iwl_process_add_sta_resp(struct iwl_priv *priv,
/*
* XXX: The MAC address in the command buffer is often changed from
* the original sent to the device. That is, the MAC address
- * written to the command buffer often is not the same MAC adress
+ * written to the command buffer often is not the same MAC address
* read from the command buffer when the command returns. This
* issue has not yet been resolved and this debugging is left to
* observe the problem.
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index c3c206a..a7d3f4c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -274,7 +274,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
intf->beacon = entry;

/*
- * The MAC adddress must be configured after the device
+ * The MAC address must be configured after the device
* has been initialized. Otherwise the device can reset
* the MAC registers.
* The BSSID address must only be configured in AP mode,
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index ee82df6..3e5befe 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -192,7 +192,7 @@ static inline void wl3501_switch_page(struct wl3501_card *this, u8 page)
}

/*
- * Get Ethernet MAC addresss.
+ * Get Ethernet MAC address.
*
* WARNING: We switch to FPAGE0 and switc back again.
* Making sure there is no other WL function beening called by ISR.
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index dbbc601..7cb5756 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -416,7 +416,7 @@ static u8 orc_load_firmware(struct orc_host * host)
/* Go back and check they match */

outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL); /* Reset program count 0 */
- bios_addr -= 0x1000; /* Reset the BIOS adddress */
+ bios_addr -= 0x1000; /* Reset the BIOS address */
for (i = 0, data32_ptr = (u8 *) & data32; /* Check the code */
i < 0x1000; /* Firmware code size = 4K */
i++, bios_addr++) {
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index 28aaf34..40273a7 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -1689,7 +1689,7 @@
#define PHY_START_CAL 0x01

/*
- * HST_PCIX2 Registers, Addresss Range: (0x00-0xFC)
+ * HST_PCIX2 Registers, Address Range: (0x00-0xFC)
*/
#define PCIX_REG_BASE_ADR 0xB8040000

@@ -1802,7 +1802,7 @@
#define PCIC_TP_CTRL 0xFC

/*
- * EXSI Registers, Addresss Range: (0x00-0xFC)
+ * EXSI Registers, Address Range: (0x00-0xFC)
*/
#define EXSI_REG_BASE_ADR REG_BASE_ADDR_EXSI

diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 154529a..49596a1 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -341,9 +341,9 @@ static void atmel_spi_next_message(struct spi_master *master)
/*
* For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma:
* - The buffer is either valid for CPU access, else NULL
- * - If the buffer is valid, so is its DMA addresss
+ * - If the buffer is valid, so is its DMA address
*
- * This driver manages the dma addresss unless message->is_dma_mapped.
+ * This driver manages the dma address unless message->is_dma_mapped.
*/
static int
atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index c7b1d81..8cb9d80 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -49,7 +49,7 @@
*
* USB Stack port number 4 (1 based)
* WUSB code port index 3 (0 based)
- * USB Addresss 5 (2 based -- 0 is for default, 1 for root hub)
+ * USB Address 5 (2 based -- 0 is for default, 1 for root hub)
*
* Now, because we don't use the concept as default address exactly
* like the (wired) USB code does, we need to kind of skip it. So we
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 2283369..a9f75a4 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -554,7 +554,7 @@ struct ext4_mount_options {
#endif
};

-/* Max physical block we can addres w/o extents */
+/* Max physical block we can address w/o extents */
#define EXT4_MAX_BLOCK_FILE_PHYS 0xFFFFFFFF

/*
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index c637b75..cd77aa7 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -119,7 +119,7 @@ struct acpi_whea_header {
struct acpi_table_bert {
struct acpi_table_header header; /* Common ACPI table header */
u32 region_length; /* Length of the boot error region */
- u64 address; /* Physical addresss of the error region */
+ u64 address; /* Physical address of the error region */
};

/* Boot Error Region (not a subtable, pointed to by Address field above) */
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
index 2b2769c..2a128c8 100644
--- a/include/net/sctp/user.h
+++ b/include/net/sctp/user.h
@@ -99,8 +99,8 @@ typedef __s32 sctp_assoc_t;
#define SCTP_SOCKOPT_PEELOFF 102 /* peel off association. */
/* Options 104-106 are deprecated and removed. Do not use this space */
#define SCTP_SOCKOPT_CONNECTX_OLD 107 /* CONNECTX old requests. */
-#define SCTP_GET_PEER_ADDRS 108 /* Get all peer addresss. */
-#define SCTP_GET_LOCAL_ADDRS 109 /* Get all local addresss. */
+#define SCTP_GET_PEER_ADDRS 108 /* Get all peer address. */
+#define SCTP_GET_LOCAL_ADDRS 109 /* Get all local address. */
#define SCTP_SOCKOPT_CONNECTX 110 /* CONNECTX requests. */
#define SCTP_SOCKOPT_CONNECTX3 111 /* CONNECTX requests (updated) */

diff --git a/kernel/kexec.c b/kernel/kexec.c
index c0613f7..f56db58 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -163,7 +163,7 @@ static int do_kimage_alloc(struct kimage **rimage, unsigned long entry,
* just verifies it is an address we can use.
*
* Since the kernel does everything in page size chunks ensure
- * the destination addreses are page aligned. Too many
+ * the destination addresses are page aligned. Too many
* special cases crop of when we don't do this. The most
* insidious is getting overlapping destination addresses
* simply because addresses are changed to page size
diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c
index 1357c57..d9c5fe4 100644
--- a/kernel/sysctl_binary.c
+++ b/kernel/sysctl_binary.c
@@ -1193,7 +1193,7 @@ static ssize_t bin_dn_node_address(struct file *file,

buf[result] = '\0';

- /* Convert the decnet addresss to binary */
+ /* Convert the decnet address to binary */
result = -EIO;
nodep = strchr(buf, '.') + 1;
if (!nodep)
diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h
index e3dfeca..6cf2237 100644
--- a/kernel/trace/trace_entries.h
+++ b/kernel/trace/trace_entries.h
@@ -53,7 +53,7 @@
*/

/*
- * Function trace entry - function address and parent function addres:
+ * Function trace entry - function address and parent function address:
*/
FTRACE_ENTRY(function, ftrace_entry,

diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index 4c409b4..9b73e0b 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -1112,7 +1112,7 @@ static struct dn_dev *dn_dev_create(struct net_device *dev, int *err)
/*
* This processes a device up event. We only start up
* the loopback device & ethernet devices with correct
- * MAC addreses automatically. Others must be started
+ * MAC addresses automatically. Others must be started
* specifically.
*
* FIXME: How should we configure the loopback address ? If we could dispense
diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h
index f19c110..fc53b9b 100644
--- a/sound/pci/ca0106/ca0106.h
+++ b/sound/pci/ca0106/ca0106.h
@@ -188,7 +188,7 @@
#define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */
/* PTR[5:0], Default: 0x0 */
#define PLAYBACK_UNKNOWN3 0x03 /* Not used ?? */
-#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA addresss */
+#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */
/* DMA[31:0], Default: 0x0 */
#define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size. win2000 uses 0x04000000 */
/* SIZE[31:16], Default: 0x0 */
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index df47f73..0c701e4 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -114,7 +114,7 @@ MODULE_PARM_DESC(enable, "Enable the EMU10K1X soundcard.");
*/
#define PLAYBACK_LIST_SIZE 0x01 /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000 */
#define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */
-#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA addresss */
+#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */
#define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size */
#define PLAYBACK_POINTER 0x06 /* Playback period pointer. Sample currently in DAC */
#define PLAYBACK_UNKNOWN1 0x07
diff --git a/sound/pci/emu10k1/p16v.h b/sound/pci/emu10k1/p16v.h
index 1532149..00f4817 100644
--- a/sound/pci/emu10k1/p16v.h
+++ b/sound/pci/emu10k1/p16v.h
@@ -96,7 +96,7 @@
#define PLAYBACK_LIST_SIZE 0x01 /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000 */
#define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */
#define PLAYBACK_UNKNOWN3 0x03 /* Not used */
-#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA addresss */
+#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */
#define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size. win2000 uses 0x04000000 */
#define PLAYBACK_POINTER 0x06 /* Playback period pointer. Used with PLAYBACK_LIST_PTR to determine buffer position currently in DAC */
#define PLAYBACK_FIFO_END_ADDRESS 0x07 /* Playback FIFO end address */
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 23a58f0..7c17f45 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -220,7 +220,7 @@ MODULE_PARM_DESC(joystick, "Enable joystick.");
#define RINGB_EN_2CODEC 0x0020
#define RINGB_SING_BIT_DUAL 0x0040

-/* ****Port Adresses**** */
+/* ****Port Addresses**** */

/* Write & Read */
#define ESM_INDEX 0x02
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index dc4402d..f5eadfc 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -550,7 +550,7 @@ static inline int HDSPM_bit2freq(int n)
return bit2freq_tab[n];
}

-/* Write/read to/from HDSPM with Adresses in Bytes
+/* Write/read to/from HDSPM with Addresses in Bytes
not words but only 32Bit writes are allowed */

static inline void hdspm_write(struct hdspm * hdspm, unsigned int reg,
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-10-26 22:05    [from the cache]
©2003-2011 Jasper Spaans