lkml.org 
[lkml]   [2010]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: [PATCH v4] Bluetooth: btwilink driver

> -----Original Message-----
> From: Pavan Savoy [mailto:pavan_savoy@sify.com]
> Sent: Thursday, October 21, 2010 8:26 AM
> To: padovan@profusion.mobi; marcel@holtmann.org
> Cc: linux-bluetooth@vger.kernel.org; linux-kernel@vger.kernel.org; Savoy,
> Pavan
> Subject: Re: [PATCH v4] Bluetooth: btwilink driver
>

Gustavo, Marcel,

Please review and provide comments.
If it is fine, please pull it in.

>
> On Tue, Oct 19, 2010 at 6:06 PM, <pavan_savoy@ti.com> wrote:
> > From: Pavan Savoy <pavan_savoy@ti.com>
> >
> > v4 comments
> >
> > module init now returns what platform_driver_register returns.
> > type casting of void* private data has been removed
>
> If there are no more critical comments, can it go in?
> Please review.
>
> Thanks,
> Pavan
>
> > v3 comments
> >
> > Lizardo,
> > I have taken care of most of the comments you had.
> > Have re-wrote some of the code commenting you've mentioned.
> > Thanks for the comments,
> >
> > Marcel, Gustavo, & list,
> > Please review this version of patch.
> >
> > The other few like -EPERM for platform driver registration is to keep
> > it similar to other drivers, type casting is maintained just to feel safe
> > and have style similar to other drivers.
> > BT_WILINK in Kconfig is similar to BT_MRVL.
> > I hope those aren't too critical.
> >
> > -- patch description --
> >
> > This is the bluetooth protocol driver for the TI WiLink7 chipsets.
> > Texas Instrument's WiLink chipsets combine wireless technologies
> > like BT, FM, GPS and WLAN onto a single chip.
> >
> > This Bluetooth driver works on top of the TI_ST shared transport
> > line discipline driver which also allows other drivers like
> > FM V4L2 and GPS character driver to make use of the same UART interface.
> >
> > Kconfig and Makefile modifications to enable the Bluetooth
> > driver for Texas Instrument's WiLink 7 chipset.
> >
> > Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
> > ---
> > drivers/bluetooth/Kconfig | 10 +
> > drivers/bluetooth/Makefile | 1 +
> > drivers/bluetooth/btwilink.c | 411
> ++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 422 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/bluetooth/btwilink.c
> >
> > diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
> > index 02deef4..8e0de9a 100644
> > --- a/drivers/bluetooth/Kconfig
> > +++ b/drivers/bluetooth/Kconfig
> > @@ -219,4 +219,14 @@ config BT_ATH3K
> > Say Y here to compile support for "Atheros firmware download
> driver"
> > into the kernel or say M to compile it as module (ath3k).
> >
> > +config BT_WILINK
> > + tristate "Texas Instruments WiLink7 driver"
> > + depends on TI_ST
> > + help
> > + This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
> > + combo devices. This makes use of shared transport line discipline
> > + core driver to communicate with the BT core of the combo chip.
> > +
> > + Say Y here to compile support for Texas Instrument's WiLink7
> driver
> > + into the kernel or say M to compile it as module.
> > endmenu
> > diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
> > index 71bdf13..f4460f4 100644
> > --- a/drivers/bluetooth/Makefile
> > +++ b/drivers/bluetooth/Makefile
> > @@ -18,6 +18,7 @@ obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o
> > obj-$(CONFIG_BT_ATH3K) += ath3k.o
> > obj-$(CONFIG_BT_MRVL) += btmrvl.o
> > obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o
> > +obj-$(CONFIG_BT_WILINK) += btwilink.o
> >
> > btmrvl-y := btmrvl_main.o
> > btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o
> > diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c
> > new file mode 100644
> > index 0000000..218efd6
> > --- /dev/null
> > +++ b/drivers/bluetooth/btwilink.c
> > @@ -0,0 +1,411 @@
> > +/*
> > + * Texas Instrument's Bluetooth Driver For Shared Transport.
> > + *
> > + * Bluetooth Driver acts as interface between HCI core and
> > + * TI Shared Transport Layer.
> > + *
> > + * Copyright (C) 2009-2010 Texas Instruments
> > + * Author: Raja Mani <raja_mani@ti.com>
> > + * Pavan Savoy <pavan_savoy@ti.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
> USA
> > + *
> > + */
> > +
> > +#include <linux/platform_device.h>
> > +#include <net/bluetooth/bluetooth.h>
> > +#include <net/bluetooth/hci_core.h>
> > +
> > +#include <linux/ti_wilink_st.h>
> > +
> > +/* Bluetooth Driver Version */
> > +#define VERSION "1.0"
> > +
> > +/* Number of seconds to wait for registration completion
> > + * when ST returns PENDING status.
> > + */
> > +#define BT_REGISTER_TIMEOUT 6000 /* 6 sec */
> > +
> > +/**
> > + * struct ti_st - driver operation structure
> > + * @hdev: hci device pointer which binds to bt driver
> > + * @reg_status: ST registration callback status
> > + * @st_write: write function provided by the ST driver
> > + * to be used by the driver during send_frame.
> > + * @wait_reg_completion - completion sync between ti_st_open
> > + * and ti_st_registration_completion_cb.
> > + */
> > +struct ti_st {
> > + struct hci_dev *hdev;
> > + char reg_status;
> > + long (*st_write) (struct sk_buff *);
> > + struct completion wait_reg_completion;
> > +};
> > +
> > +static int reset;
> > +
> > +/* Increments HCI counters based on pocket ID (cmd,acl,sco) */
> > +static inline void ti_st_tx_complete(struct ti_st *hst, int pkt_type)
> > +{
> > + struct hci_dev *hdev;
> > + hdev = hst->hdev;
> > +
> > + /* Update HCI stat counters */
> > + switch (pkt_type) {
> > + case HCI_COMMAND_PKT:
> > + hdev->stat.cmd_tx++;
> > + break;
> > +
> > + case HCI_ACLDATA_PKT:
> > + hdev->stat.acl_tx++;
> > + break;
> > +
> > + case HCI_SCODATA_PKT:
> > + hdev->stat.sco_tx++;
> > + break;
> > + }
> > +}
> > +
> > +/* ------- Interfaces to Shared Transport ------ */
> > +
> > +/* Called by ST layer to indicate protocol registration completion
> > + * status.ti_st_open() function will wait for signal from this
> > + * API when st_register() function returns ST_PENDING.
> > + */
> > +static void st_registration_completion_cb(void *priv_data, char data)
> > +{
> > + struct ti_st *lhst = priv_data;
> > +
> > + /* Save registration status for use in ti_st_open() */
> > + lhst->reg_status = data;
> > + /* complete the wait in ti_st_open() */
> > + complete(&lhst->wait_reg_completion);
> > +}
> > +
> > +/* Called by Shared Transport layer when receive data is
> > + * available */
> > +static long st_receive(void *priv_data, struct sk_buff *skb)
> > +{
> > + int err;
> > + struct ti_st *lhst = priv_data;
> > +
> > + if (!skb)
> > + return -EFAULT;
> > +
> > + if (!lhst) {
> > + kfree_skb(skb);
> > + return -EFAULT;
> > + }
> > +
> > + skb->dev = (struct net_device *)lhst->hdev;
> > +
> > + /* Forward skb to HCI core layer */
> > + err = hci_recv_frame(skb);
> > + if (err) {
> > + kfree_skb(skb);
> > + BT_ERR("Unable to push skb to HCI core(%d)", err);
> > + return err;
> > + }
> > +
> > + lhst->hdev->stat.byte_rx += skb->len;
> > +
> > + return 0;
> > +}
> > +
> > +/* ------- Interfaces to HCI layer ------ */
> > +/* protocol structure registered with shared transport */
> > +static struct st_proto_s ti_st_proto = {
> > + .type = ST_BT,
> > + .recv = st_receive,
> > + .reg_complete_cb = st_registration_completion_cb,
> > + .priv_data = NULL,
> > +};
> > +
> > +/* Called from HCI core to initialize the device */
> > +static int ti_st_open(struct hci_dev *hdev)
> > +{
> > + unsigned long timeleft;
> > + struct ti_st *hst;
> > + int err;
> > +
> > + BT_DBG("%s %p", hdev->name, hdev);
> > +
> > + /* provide contexts for callbacks from ST */
> > + hst = hdev->driver_data;
> > + ti_st_proto.priv_data = hst;
> > +
> > + err = st_register(&ti_st_proto);
> > + if (err == -EINPROGRESS) {
> > + /* Prepare wait-for-completion handler data structures.
> > + * Needed to synchronize this and
> > + * st_registration_completion_cb() functions.
> > + */
> > + init_completion(&hst->wait_reg_completion);
> > +
> > + /* Reset ST registration callback status flag , this value
> > + * will be updated in ti_st_registration_completion_cb()
> > + * function whenever it called from ST driver.
> > + */
> > + hst->reg_status = -EINPROGRESS;
> > +
> > + /* ST is busy with either protocol registration or firmware
> > + * download. Wait until the registration callback is called
> > + */
> > + BT_DBG(" waiting for registration completion signal from
> ST");
> > +
> > + timeleft = wait_for_completion_timeout
> > + (&hst->wait_reg_completion,
> > + msecs_to_jiffies(BT_REGISTER_TIMEOUT));
> > + if (!timeleft) {
> > + BT_ERR("Timeout(%d sec),didn't get reg "
> > + "completion signal from ST",
> > + BT_REGISTER_TIMEOUT / 1000);
> > + return -ETIMEDOUT;
> > + }
> > +
> > + /* Is ST registration callback called with ERROR status? */
> > + if (hst->reg_status != 0) {
> > + BT_ERR("ST registration completed with invalid "
> > + "status %d", hst->reg_status);
> > + return -EAGAIN;
> > + }
> > + err = 0;
> > + } else if (err == -EPERM) {
> > + BT_ERR("st_register failed %d", err);
> > + return err;
> > + }
> > +
> > + hst->st_write = ti_st_proto.write;
> > + if (!hst->st_write) {
> > + BT_ERR("undefined ST write function");
> > +
> > + /* Undo registration with ST */
> > + err = st_unregister(ST_BT);
> > + if (err)
> > + BT_ERR("st_unregister() failed with error %d", err);
> > +
> > + hst->st_write = NULL;
> > + return err;
> > + }
> > +
> > + /* Registration with ST layer is successful,
> > + * hardware is ready to accept commands from HCI core.
> > + */
> > + set_bit(HCI_RUNNING, &hdev->flags);
> > +
> > + return err;
> > +}
> > +
> > +/* Close device */
> > +static int ti_st_close(struct hci_dev *hdev)
> > +{
> > + int err;
> > + struct ti_st *hst = hdev->driver_data;
> > +
> > + /* continue to unregister from transport */
> > + err = st_unregister(ST_BT);
> > + if (err)
> > + BT_ERR("st_unregister() failed with error %d", err);
> > +
> > + hst->st_write = NULL;
> > +
> > + return err;
> > +}
> > +
> > +static int ti_st_send_frame(struct sk_buff *skb)
> > +{
> > + struct hci_dev *hdev;
> > + struct ti_st *hst;
> > + long len;
> > +
> > + if (!skb)
> > + return -ENOMEM;
> > +
> > + hdev = (struct hci_dev *)skb->dev;
> > + if (!hdev)
> > + return -ENODEV;
> > +
> > + if (!test_bit(HCI_RUNNING, &hdev->flags))
> > + return -EBUSY;
> > +
> > + hst = hdev->driver_data;
> > +
> > + /* Prepend skb with frame type */
> > + memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
> > +
> > + BT_DBG(" %s: type %d len %d", hdev->name, bt_cb(skb)->pkt_type,
> > + skb->len);
> > +
> > + /* Insert skb to shared transport layer's transmit queue.
> > + * Freeing skb memory is taken care in shared transport layer,
> > + * so don't free skb memory here.
> > + */
> > + if (!hst->st_write) {
> > + kfree_skb(skb);
> > + BT_ERR(" Could not write to ST (st_write is NULL)");
> > + return -EAGAIN;
> > + }
> > +
> > + len = hst->st_write(skb);
> > + if (len < 0) {
> > + kfree_skb(skb);
> > + BT_ERR(" ST write failed (%ld)", len);
> > + return -EAGAIN;
> > + }
> > +
> > + /* ST accepted our skb. So, Go ahead and do rest */
> > + hdev->stat.byte_tx += len;
> > + ti_st_tx_complete(hst, bt_cb(skb)->pkt_type);
> > +
> > + return 0;
> > +}
> > +
> > +static void ti_st_destruct(struct hci_dev *hdev)
> > +{
> > + if (!hdev)
> > + return;
> > +
> > + BT_DBG("%s", hdev->name);
> > +
> > + /* free ti_st memory */
> > + kfree(hdev->driver_data);
> > +
> > + return;
> > +}
> > +
> > +/* Creates new HCI device */
> > +static int ti_st_register_dev(struct ti_st *hst)
> > +{
> > + int err;
> > + struct hci_dev *hdev;
> > +
> > + /* Initialize and register HCI device */
> > + hdev = hci_alloc_dev();
> > + if (!hdev)
> > + return -ENOMEM;
> > +
> > + BT_DBG("hdev %p", hdev);
> > +
> > + hst->hdev = hdev;
> > + hdev->bus = HCI_UART;
> > + hdev->driver_data = hst;
> > + hdev->open = ti_st_open;
> > + hdev->close = ti_st_close;
> > + hdev->flush = NULL;
> > + hdev->send = ti_st_send_frame;
> > + hdev->destruct = ti_st_destruct;
> > + hdev->owner = THIS_MODULE;
> > +
> > + if (reset)
> > + set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
> > +
> > + err = hci_register_dev(hdev);
> > + if (err < 0) {
> > + BT_ERR("Can't register HCI device error %d", err);
> > + hci_free_dev(hdev);
> > + return err;
> > + }
> > +
> > + BT_DBG(" HCI device registered (hdev %p)", hdev);
> > + return 0;
> > +}
> > +
> > +
> > +static int bt_ti_probe(struct platform_device *pdev)
> > +{
> > + int err;
> > + static struct ti_st *hst;
> > +
> > + BT_DBG(" Bluetooth Driver Version %s", VERSION);
> > +
> > + hst = kzalloc(sizeof(struct ti_st), GFP_KERNEL);
> > + if (!hst)
> > + return -ENOMEM;
> > +
> > + /* Expose "hciX" device to user space */
> > + err = ti_st_register_dev(hst);
> > + if (err) {
> > + kfree(hst);
> > + return err;
> > + }
> > +
> > + dev_set_drvdata(&pdev->dev, hst);
> > + return err;
> > +}
> > +
> > +static int bt_ti_remove(struct platform_device *pdev)
> > +{
> > + struct ti_st *hst;
> > + struct hci_dev *hdev;
> > +
> > + hst = dev_get_drvdata(&pdev->dev);
> > +
> > + if (!hst)
> > + return -EFAULT;
> > +
> > + /* Deallocate local resource's memory */
> > + hdev = hst->hdev;
> > +
> > + if (!hdev) {
> > + BT_ERR("Invalid hdev memory");
> > + kfree(hst);
> > + return -EFAULT;
> > + }
> > +
> > + ti_st_close(hdev);
> > + hci_unregister_dev(hdev);
> > + /* Free HCI device memory */
> > + hci_free_dev(hdev);
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_driver btwilink_driver = {
> > + .probe = bt_ti_probe,
> > + .remove = bt_ti_remove,
> > + .driver = {
> > + .name = "btwilink",
> > + .owner = THIS_MODULE,
> > + },
> > +};
> > +
> > +/* ------- Module Init/Exit interfaces ------ */
> > +static int __init bt_drv_init(void)
> > +{
> > + long ret;
> > +
> > + ret = platform_driver_register(&btwilink_driver);
> > + if (ret != 0) {
> > + BT_ERR("btwilink platform driver registration failed");
> > + return ret;
> > + }
> > + return 0;
> > +}
> > +
> > +static void __exit bt_drv_exit(void)
> > +{
> > + platform_driver_unregister(&btwilink_driver);
> > +}
> > +
> > +module_init(bt_drv_init);
> > +module_exit(bt_drv_exit);
> > +
> > +/* ------ Module Info ------ */
> > +
> > +module_param(reset, bool, 0644);
> > +MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
> > +MODULE_AUTHOR("Raja Mani <raja_mani@ti.com>");
> > +MODULE_DESCRIPTION("Bluetooth Driver for TI Shared Transport" VERSION);
> > +MODULE_VERSION(VERSION);
> > +MODULE_LICENSE("GPL");
> > --
> > 1.6.5
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-bluetooth"
> in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >


\
 
 \ /
  Last update: 2010-10-26 17:51    [W:0.659 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site