lkml.org 
[lkml]   [2010]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 07/12] hwmon: lis3: New parameters to platform data
Op 22-10-10 13:57, Samu Onkalo schreef:
> Added default output data rate setting to platform data.
> If default rate is 0, reset default value is used.
> Added control for duration via platform data.
> Added possibility to configure interrupts to trig on
> both rising and falling edge. The lis3 WU unit can be
> configured quite many ways and with some configurations it
> is quite handy to get coordinate refresh when some
> event trigs and when it reason goes away.
>
> Signed-off-by: Samu Onkalo<samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>

> ---
> drivers/hwmon/lis3lv02d.c | 21 ++++++++++++++-------
> include/linux/lis3lv02d.h | 6 +++++-
> 2 files changed, 19 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
> index b44d4c5..d66cbe1 100644
> --- a/drivers/hwmon/lis3lv02d.c
> +++ b/drivers/hwmon/lis3lv02d.c
> @@ -706,16 +706,16 @@ static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
> if (p->wakeup_flags) {
> dev->write(dev, FF_WU_CFG_1, p->wakeup_flags);
> dev->write(dev, FF_WU_THS_1, p->wakeup_thresh& 0x7f);
> - /* default to 2.5ms for now */
> - dev->write(dev, FF_WU_DURATION_1, 1);
> + /* pdata value + 1 to keep this backward compatible*/
> + dev->write(dev, FF_WU_DURATION_1, p->duration1 + 1);
> ctrl2 ^= HP_FF_WU1; /* Xor to keep compatible with old pdata*/
> }
>
> if (p->wakeup_flags2) {
> dev->write(dev, FF_WU_CFG_2, p->wakeup_flags2);
> dev->write(dev, FF_WU_THS_2, p->wakeup_thresh2& 0x7f);
> - /* default to 2.5ms for now */
> - dev->write(dev, FF_WU_DURATION_2, 1);
> + /* pdata value + 1 to keep this backward compatible*/
> + dev->write(dev, FF_WU_DURATION_2, p->duration2 + 1);
> ctrl2 ^= HP_FF_WU2; /* Xor to keep compatible with old pdata*/
> }
> /* Configure hipass filters */
> @@ -725,8 +725,8 @@ static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
> err = request_threaded_irq(p->irq2,
> NULL,
> lis302dl_interrupt_thread2_8b,
> - IRQF_TRIGGER_RISING |
> - IRQF_ONESHOT,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT |
> + (p->irq_flags2& IRQF_TRIGGER_MASK),
> DRIVER_NAME,&lis3_dev);
> if (err< 0)
> printk(KERN_ERR DRIVER_NAME
> @@ -742,6 +742,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
> {
> int err;
> irq_handler_t thread_fn;
> + int irq_flags = 0;
>
> dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I);
>
> @@ -804,9 +805,14 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
> if (dev->whoami == WAI_8B)
> lis3lv02d_8b_configure(dev, p);
>
> + irq_flags = p->irq_flags1& IRQF_TRIGGER_MASK;
> +
> dev->irq_cfg = p->irq_cfg;
> if (p->irq_cfg)
> dev->write(dev, CTRL_REG3, p->irq_cfg);
> +
> + if (p->default_rate)
> + lis3lv02d_set_odr(p->default_rate);
> }
>
> /* bail if we did not get an IRQ from the bus layer */
> @@ -834,7 +840,8 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
>
> err = request_threaded_irq(dev->irq, lis302dl_interrupt,
> thread_fn,
> - IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT |
> + irq_flags,
> DRIVER_NAME,&lis3_dev);
>
> if (err< 0) {
> diff --git a/include/linux/lis3lv02d.h b/include/linux/lis3lv02d.h
> index c4a4a52..18d578f 100644
> --- a/include/linux/lis3lv02d.h
> +++ b/include/linux/lis3lv02d.h
> @@ -36,7 +36,10 @@ struct lis3lv02d_platform_data {
> #define LIS3_IRQ_OPEN_DRAIN (1<< 6)
> #define LIS3_IRQ_ACTIVE_LOW (1<< 7)
> unsigned char irq_cfg;
> -
> + unsigned char irq_flags1; /* Additional irq edge / level flags */
> + unsigned char irq_flags2; /* Additional irq edge / level flags */
> + unsigned char duration1;
> + unsigned char duration2;
> #define LIS3_WAKEUP_X_LO (1<< 0)
> #define LIS3_WAKEUP_X_HI (1<< 1)
> #define LIS3_WAKEUP_Y_LO (1<< 2)
> @@ -66,6 +69,7 @@ struct lis3lv02d_platform_data {
> s8 axis_z;
> #define LIS3_USE_REGULATOR_CTRL 0x01
> u16 driver_features;
> + int default_rate;
> int (*setup_resources)(void);
> int (*release_resources)(void);
> /* Limits for selftest are specified in chip data sheet */



\
 
 \ /
  Last update: 2010-10-24 17:11    [W:0.143 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site