lkml.org 
[lkml]   [2010]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] b44: fix resume, request_irq after hw reset
From
From: James Hogan <james@albanarts.com>
Date: Sun, 17 Oct 2010 12:48:59 +0100

> On resume, call request_irq() after resetting the hardware rather than
> before. It's a shared interrupt so the handler could be called
> immediately if another device on the same irq interrupts (and will be
> called immediately if CONFIG_DEBUG_SHIRQ=y), but unless the hardware is
> reinitialised with b44_init_hw() the read of the interrupt status
> register will hang the system.
>
> Signed-off-by: James Hogan <james@albanarts.com>

Applied.


\
 
 \ /
  Last update: 2010-10-21 13:33    [W:0.037 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site